Hyperfast Rectifier
N
C
N
Bulletin PD-20749 rev. D 08/01
15ETH06
15ETH06S
15ETH06-1
Features
• Hyperfastfast Recovery Time
• Low Forward Voltage Drop
• Low Leakage Current
• 175°C Operating Junction Temperature
• Single Die Center Tap Module
Description/ Applications
State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop,
Hyperfast recover time, and soft recovery.
The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness
and reliability characteristics.
These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling
diodes.
The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
t
= 22ns typ.
rr
I
= 15Amp
F(AV)
VR = 600V
Absolute Maximum Ratings
Parameters Max Units
V
RRM
I
F(AV)
I
FSM
I
FM
TJ, T
Peak Repetitive Peak Reverse Voltage 600 V
Average Rectified Forward Current @ TC = 140°C 15 A
Non Repetitive Peak Surge Current @ TJ = 25°C 120
Peak Repetitive Forward Current 30
Operating Junction and Storage Temperatures - 65 to 175 °C
STG
Case Styles
15ETH06
15ETH06S
15ETH06-1
Base
Cathode
athode
1
Anode
3
TO-220AC
www.irf.com
Cathode
1
/C
D2PAK
Base
2
2
3
Anode
1
/C
3
Anode
TO-262
1
15ETH06, 15ETH06S, 15ETH06-1
Bulletin PD-20749 rev. D 08/01
Electrical Characteristics @ T
Parameters Min Typ Max Test Conditions
= 25°C (unless otherwise specified)
J
Units
VBR, VrBreakdown Voltage, 600 - - V IR = 100µA
Blocking Voltage
V
F
Forward Voltage - 1.8 2.2 V IF = 15A, TJ = 25°C
- 1.3 1.6 V IF = 15A, TJ = 150°C
I
R
Reverse Leakage Current - 0.2 50 µA VR = VR Rated
- 30 500 µA TJ = 150°C, VR = VR Rated
C
T
L
S
Junction Capacitance - 20 - pF VR = 600V
Series Inductance - 8.0 - nH Measured lead to lead 5mm from package body
Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified)
t
rr
I
RRM
Q
t
rr
I
RRM
Q
Parameters Min Typ Max Test Conditions
Reverse Recovery Time - 22 30 ns IF = 1A, diF/dt = 100A/µs, VR = 30V
-2835 IF = 15A, diF/dt = 100A/µs, VR = 30V
-29- TJ = 25°C
-75- TJ = 125°C
Peak Recovery Current - 3.5 - A TJ = 25°C
-7- TJ = 125°C
Reverse Recovery Charge - 57 - nC TJ = 25°C
rr
- 300 - TJ = 125°C
Reverse Recovery Time - 51 - ns
Peak Recovery Current - 20 - A TJ = 125°C
Reverse Recovery Charge - 580 - nC
rr
Units
I
= 15A
F
diF /dt = 200A/µs
VR = 390V
I
= 15A
F
diF /dt = 800A/µs
VR = 390V
Thermal - Mechanical Characteristics
Parameters Min Typ Max Units
T
J
T
Stg
R
thJC
R
thJA
R
thCS
! Typical Socket Mount
"#Mounting Surface, Flat, Smooth and Greased
2
Max. Junction Temperature Range - - 175 °C
Max. Storage Temperature Range - 65 - 175
Thermal Resistance, Junction to Case Per Leg - 1.0 1.3 °C/W
!
Thermal Resistance, Junction to Ambient Per Leg - - 70
"
Thermal Resistance, Case to Heatsink - 0.5 -
Weight - 2.0 - g
Mounting Torque 6.0 - 12 Kg-cm
- 0.07 - (oz)
5.0 - 10 lbf.in
www.irf.com
15ETH06, 15ETH06S, 15ETH06-1
Bulletin PD-20749 rev. D 08/01
100
(A)
F
10
Instantaneous Forward Current - I
T = 175˚C
J
T = 150˚C
J
T = 25˚C
J
1000
T = 175˚C
J
150˚C
125˚C
100˚C
(µA)
R
100
10
1
0.1
0.01
Reverse Current - I
0.001
0
0 100 200 300 400 500 600
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage
1000
T = 25˚C
J
( p F )
T
100
25˚C
1
0.5 1 1.5 2 2.5 3
Forward Voltage Drop - VFM (V)
Fig. 1 - Typical Forward Voltage Drop Characteristics
10
(°C/W)
D = 0.50
thJC
1
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.1
Single Pulse
Thermal Impedance Z
0.01
0.00001 0.0001 0.001 0.01 0.1 1 10
(Thermal Resistance)
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance Z
www.irf.com
Junction Capacitance - C
10
0 100 200 300 400 500 600
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
P
DM
Notes:
1. Duty factor D = t1/ t2
2. Peak Tj = Pdm x ZthJC + Tc
Characteristics
thJC
t
1
t
2
3
15ETH06, 15ETH06S, 15ETH06-1
Bulletin PD-20749 rev. D 08/01
180
170
160
DC
150
140
Square wave (D = 0.50)
130
80% Rated Vr applied
120
see note (3)
Allowable Case Temperature (°C)
110
0 5 10 15 20 25
Average Forward Current - IF
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current
100
IF = 30 A
IF = 15 A
80
(AV)
(A)
35
30
25
RMS Limit
20
D = 0.01
15
D = 0.02
D = 0.05
10
5
Average Power Loss ( Watts )
0
0 5 10 15 20 25
Average Forward Current - IF
D = 0.1
D = 0.2
D = 0.5
DC
(AV)
(A)
Fig. 6 - Forward Power Loss Characteristics
1000
V = 390V
R
T = 125˚C
J
T = 25˚C
J
800
IF = 30 A
IF = 15 A
60
trr ( ns )
40
20
V = 390V
R
T = 125˚C
J
T = 25˚C
J
0
100 1000
di
F
/dt (A/µs )
Fig. 7 - Typical Reverse Recovery vs. di
(3) Formula used: TC = TJ - (Pd + Pd
Pd = Forward Power Loss = I
Pd
= Inverse Power Loss = VR1 x IR (1 - D); IR @ V
REV
4
F(AV)
) x R
REV
x VFM @ (I
thJC
;
F(AV)
/dt
F
/ D) (see Fig. 6);
= rated V
R1
600
Qrr ( nC )
400
200
0
100 1000
di F /dt (A/µs )
Fig. 8 - Typical Stored Charge vs. di
R
/dt
F
www.irf.com
Reverse Recovery Circuit
V = 200V
R
0.01
Ω
L = 70µH
D.U.T.
15ETH06, 15ETH06S, 15ETH06-1
Bulletin PD-20749 rev. D 08/01
diF /dt
dif/dt
ADJUST
G
Fig. 9- Reverse Recovery Parameter Test Circuit
I
F
t
a
0
1
diF /dt
di /dt
f
1. diF/dt - Rate of change of current through zero
crossing
2. I
- Peak reverse recovery current
RRM
3. t
- Reverse recovery time measured from zero
rr
crossing point of negative going IF to point where
a line passing through 0.75 I
extrapolated to zero current
RRM
and 0.50 I
RRM
3
2
D
IRFP250
S
t
rr
t
b
Q
I
RRM
0.5
di(rec)M/dt
0.75
I
RRM
4. Qrr - Area under curve defined by t
and I
RRM
Q
rr
5. di
/ dt - Peak rate of change of
(rec) M
current during t b portion of t
I
=
rr
RRM
t rr x I
4
5
rr
RRM
2
rr
www.irf.com
Fig. 10 - Reverse Recovery Waveform and Definitions
5
15ETH06, 15ETH06S, 15ETH06-1
N
C
Bulletin PD-20749 rev. D 08/01
Outline Table
10.54 (0.41)
15.24 (0.60)
14.84 (0.58)
14.09 (0.55)
13.47 (0.53)
4.57 (0.18)
4.32 (0.17)
MAX.
1
1.40 (0.05)
1.15 (0.04)
1
TERM 2
3
0.94 (0.04)
0.69 (0.03)
3
5.08 (0.20) REF.
3.78 (0.15)
3.54 (0.14)
2.92 (0.11)
2.54 (0.10)
2.04 (0.080) MAX.
DIA.
3.96 (0.16)
3.55 (0.14)
0.61 (0.02) MAX.
6.48 (0.25)
6.23 (0.24)
1.32 (0.05)
1.22 (0.05)
2°
0.10 (0.004)
2.89 (0.11)
2.64 (0.10)
athode
Base
Cathode
1
Conforms to JEDEC Outline TO-220AC
Dimensions in millimeters and (inches)
Anode
3
Modified JEDEC outline TO-262
Dimensions in millimeters and (inches)
2
1
/C
3
Anode
NC
6
www.irf.com
Outline Table
N
15ETH06, 15ETH06S, 15ETH06-1
Bulletin PD-20749 rev. D 08/01
10.16 (0.40)
REF.
2.61 (0.10)
2.32 (0.09)
8.89 (0.35)
REF.
0.93 (0.37)
2X
0.69 (0.27)
5.08 (0.20) REF.
6.47 (0.25)
6.18 (0.24)
4.57 (0.18)
4.32 (0.17)
0.61 (0.02) MAX.
15.49 (0.61)
14.73 (0.58)
3X
93°
1.40 (0.055)
1.14 (0.045)
13
2
Ordering Information Table
4.69 (0.18)
4.20 (0.16)
1.32 (0.05)
1.22 (0.05)
5.28 (0.21)
4.78 (0.19)
0.55 (0.02)
0.46 (0.02)
MINIMUM RECOMMENDED FOOTPRINT
8.89 (0.35)
3.81 (0.15)
2.08 (0.08)
2X
11.43 (0.45)
17.78 (0.70)
2.54 (0.10)
2X
Conforms to JEDEC Outline D2PAK
Dimensions in millimeters and (inches)
/C
Base
Cathode
1
2
3
Anode
www.irf.com
Device Code
15 E T H 06 - 1
1 5
243
1 - Current Rating (15 = 15A)
2 - E = Single Diode
3 - T = TO-220, D2Pak
4 - H = HyperFast Recovery
5 - Voltage Rating (06 = 600V)
6 - "-1" = TO-262 Option
S= D2Pak
None = TO-220AC
6
7
15ETH06, 15ETH06S, 15ETH06-1
Bulletin PD-20749 rev. D 08/01
This product has been designed and qualified for Industrial Level.
Data and specifications subject to change without notice.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 08/01
8
www.irf.com
Loading...