Vintec V20SGEBK User Manual

vintec.com

User Manual

V20SGEBK

Important information that may impact

!

your Manufacturer’s Warranty

Adherence to the directions for use in this manual is extremely important for health
and safety. Failure to strictly adhere to the requirements in this manual may result
in personal injury, property damage and affect your ability to make a claim under the
Vintec manufacturer’s warranty provided with your product. Products must be used,
installed and operated in accordance with this manual. You may not be able to claim
on the Vintec manufacturer’s warranty in the event that your product fault is due to
failure to adhere this manual.

User Manual

V20SGEBK2

WARNING

•

This

appliance

contains

a

small

quantity

of

R600A

refrigerant

which

is

During

transportation

and

installation,

ensure

that

the

tubing

of

the

refrigerant

circuit

•

Avoid

using

or

manipulating

sharp

objects

nearby

the

appliances.

•

Leaking

refrigerant

can

ignite

and

may

damage

the

eyes.

•Inthe

event

any

damage

does

occur,

avoid

exposure

to

open

fires

and

any

device

that

Thoroughly

ventilate

the

room

in

which

the

appliance

is

located

for

several

minutes.

•

Notify

Customer

Service

for

necessary

action

and

advice.



The

room

for

installing

the

appliance

must

beatleast

1

cubic

metre

per8grams

of

The information in this document is subject to modification without any prior notice.

VINTEC offers no guarantee for our wine cellar if it is being used for any purpose other
than that for which it was spec ifically designed. VINTEC cannot be held responsible for any
error in this manual. VINTEC is not responsible or liable for any spoilage or damage to
wines or any other contents incidental or consequential to possible defects of the wine cellar.
Warranty applies to the wine cellar only and not to the contents of the wine cellar.

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and know ledge, unle

ss they have been

given supervision or instruction concerning use of the appliance by a person responsible for
their safety.

Children should be supervised to ensure that they do not play with the appliance.

R600A WARNINGS

The following models use small quantity of R600A (iso-butane) flammable refrigerant in
their sealed system as follows:

V20SGEBK – 21g

For your safety observe the following recommendations.

environmentally friendly, but flammable. It does not damage the ozone layer, nor
does it increase the greenhouse effect.

•

is not damaged.

creates a spark. Disconnect the appliance from the mains power.

•

refrigerant. The refrigerant quantity contained in this appliance is listed above in
grams; it is also noted on the Rating Plate of the appliance.

User Manual

V20SGEBK 3

It is hazardous for anyone other than an Authorised Service Person to carry out

The

wine

cellar

should

be

placed

where

the

ambient

temperature

is

between

5ºCto35ºC.If

the

ambient

temperature

is

above

or

below

this

range,

the

performance

of

the

unit

may

be

affected.

Placing

your

unitinextreme

cold

or

hot

conditions

may

cause

interior

temperatures

to

fluctuate.

The

ideal

range

of

temperature

may

notbereached.

(See

Climate

Class

at

the

endofthis

manual)

servicing or repairs to this appliance. In Queensland the authorized person must hold
a Gas Work Authorisation for hydrocarbon refrigerants, before carrying out servicing
or repairs which involve the removal of covers.

– WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
– WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other tha

n those recommended by the manufacturer.

– WARNING: Do not damage the refrigerant circuit.
– W ARNING: Do not use electrical appliances inside the food storage compartments of the

appliance, unless they are of the type recommended by the manufacturer.

The environment and personal safety mus t be considered when dis posing of this appliance.
Please ensure the appliance is taken to a recycle center for safe recycling. DO NOT dispose
of the appliance in land fill as the insulation and refrigerant gas contained in these

appliances

are flammable.

Allow 24 hours before switching on the wine cellar. During this time we recommend
that you leave the door open to clear any residual odors.

BEFORE LOADING & PLUGGING IN THE WINE CELLAR

Important: All models without front venting (air opening) are strictly for free standing
only. ( see technical chart)

Recommendations:

The location you have selected for your wine cella r should:

- be unencumbered and well ventilated;

- be well away from any heat source a nd direct sunlight;

- not be too damp (laundry, pantry, ba

throom etc.);

- have a flat floor,

- haveastandard and reliable electricity supply (standard socket to country standards,
linked to the ground), it is NOT recommended to use a multi-socket or extension lead.

- have a surge protector fitted to the electrical outlet

- away from microwave. Certain microwave ovens do not have wave interference shield.
When placed within 1 me ter vicinity of the wine cabinet, they may affect the operation of
the wine cabinet.

User Manual

V20SGEBK4

Grounding instructions

The wine cellar must be grounded in case of an electrical short circuit. Ground ing reduces
the risk of electrical shock. The wine cellar is equipped with a power cord havinga
grounding wire and grounding plug. The wine cellar plug must be plugged into a properly
installed and grounded electrical outlet.

Note: In locations where there is frequent lightning, it is advisable to use surge protectors.

Improper use of the grounding plug can result in the risk of electric shock. Consulta
qualified electrician or serv

ice person if the grounding instructions are not completely

understood.

If the supply cord is damaged, it must be replace by a qualified person in order to avoid electrical hazard.

Installing your wine cellar

Unpack and remove all of the protection and adhesive strips from the packaging around and
inside the wine cellar.

The wine cellar must be positioned such that the plug is accessible. Release the power cord.
Move your wine cellar to its final location. The wine cellar should be installed in a suitable
place where the compressor will

not be subject to physical contact.

Leveling your wine cellar: Wine cellar must be leveled BEFORE

loading your wines.

Your wine cellar is equipped with4adjustable feet to facilitate easy leveling. VINTEC
recommends that you tighten the back feet to the maximum and adjust the front feet to create
a level.

User Manual

V20SGEBK 5