How it Works
Viking Commercial
Loading...
DETU200-4B
Installation Manual
20 pgs708.5 Kb0

Viking Commercial DETU200-4B, DETU200 Installation Manual

Viking Installation Guide
Designer Built-In
Electric Cooktops
Table of Contents
Warnings & Important Safety Instructions _______________________________________________3 Dimensions (30”) ____________________________________________________________________6 Dimensions (36”) ____________________________________________________________________7 Specifications _______________________________________________________________________8 Cutout Dimensions __________________________________________________________________9 Downdraft Dimensions ______________________________________________________________9 Clearance Dimensions (Proximity to Cabinets)___________________________________________9 Clearance Dimensions (Wood/Composite or Steel Overlay) ______________________________11 Electrical Requirements _____________________________________________________________12 General Information ________________________________________________________________14 Installation_________________________________________________________________________15
IMPORTANT
DANGER
WARNING
CAUTION
– Please Read and Follow
• Before beginning, read these instructions
thoroughly and carefully.
• Installation and service must be performed by
a qualified installer, service agency.
• DO NOT remove permanently affixed labels,
warnings, or plates from the product as this may void the warranty.
• Observe all local and national codes,
requirements and ordinances.
• Write down the model and serial numbers
before installing the cooktop. Both numbers are on the serial rating plate located on bottom of cooktop box.
• Installation must conform with local codes or in
the absence of codes, the national electric code: ANSI/NFPA 70-latest edition** or CSA standards C22. 1-94, Canadian Electrical Code, part No. 0-M91 - latest edition*** and all local codes and ordinances.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. ALWAYS read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER,” “WARNING” or “CAUTION.” These words mean:
Hazards or unsafe practices
which WILL result in severe personal
injury or death
In Canada: Installation must be in accordance
with the current CAN/CGA B149.1 & 2 Gas Installation codes and with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes.
Copies of the standards listed may be obtained from: ** National Fire Protection Association One Batterymarch Park Quincy, Massachusetts 02269 *** CSA International 8501 East Pleasant Valley Rd. Cleveland, OH 44131-5575
• Installers should leave these instructions with
the consumer who should retain them for the local inspector’s use and for future reference.
Hazards or unsafe practices
which COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal injury
or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
3
IMPORTANT4– Please Read and Follow
DANGER
WARNING
CAUTION
FIRE/EXPLOSION HAZARD
IF THE INFORMATION IN
THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
• DO NOT store or use gasoline or other
flammable vapors and liquids in the vicinity of this or any other appliance.
BURN HAZARD
The use of cabinets for storage above the appliance may result in a potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be provided the risk can be reduced by installing a range hood that projects horizontally a minimum of 5” (12.7 cm) beyond the bottom of the cabinets.
ELECTRICAL GROUNDING INSTRUCTIONS
The cooktop must be electrically grounded in accordance with local codes or, in the absence of codes, with the ANSI/NFPA No. 70-latest edition. Installation should be made by a licensed electrician. This appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from the plug.
For personal safety, this appliance must be properly grounded. DO NOT under any circumstances cut or remove the third (ground) prong from the power plug.
IMPORTANT5– Please Read and Follow
WARNING
WARNING
WARNING
WARNING
This appliance shall not be used for space heating. This information is based on safety considerations.
It is the customer's responsibility to contact a qualified electrical installer. To assure that the electrical installation is Adequate and in conformity with national electrical code: ANSI/NFPA 70-latest edition** or CSA standards C22.1-94, Canadian Electrical Code, part No.0-M91
- latest edition*** and all local codes and ordinances.
SITE PREPARATION
It is recommended that a thorough site inspection be conducted PRIOR to unpacking and moving this appliance.
THE CONDUIT IS 3 FEET LONG
The junction box must be located where it will allow considerable slack in the conduit for serviceability.
Dimensions
21”
(53.3 cm)
30-3/4”
(78.1 cm)
3-1/8”*
(7.9 cm)
4-1/4”
(10.8 cm)
28”
(71.1 cm)
18-9/16”
(47.2 cm)
12”
(30.5 cm)
3-1/4”
(8.3 cm)
Power
conduit
30” Electric Cooktop
*Note: Dimension includes screw head.
6
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use