OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
All models include
FINISH DETAILS FOR ALL MODELS
• Stainless Steel (SS)
• Accessory Rail Option—Front of hood
(Must be ordered factory-installed)
o Stainless Steel/Chrome (CR)—Stainless
steel rail with chrome supports/brackets
and hooks (included).
o Brass Trim Option (BR)—Brass
nameplate, rail, supports/brackets, and
hooks (included). Brass components
have a durable protective coating for
maintenance-free normal use.
Standard Features & Accessories
Model Options
ORDERING INSTRUCTIONS
If ordering optional decorative rail, specify code at end (VWH3678T-CR).
• 27”D.
• Agency-certified for outdoor use
o Keeps outdoor air fresh
o Designed and constructed for damp
environments
• Canopy only—must also purchase
interior or exterior ventilator kit, sold
separately (see Installation Notes &
Accessories for recommended Viking
ventilators)
• Heavy-duty construction; professional-
type size, design, and styling
o Virtually seamless stainless steel
design with no visible screws
• Heat sensor turns the ventilator on full
power when cooking temperatures
reach uncomfortable levels
• Variable speed ventilator controls
o Separate controls for on/off and
speed control
• Easy cleanup
o Commercial-type baffle filter system
efficiently removes grease and
heated vapors from the air; especially
designed for use with commercialtype products
o Design of low-profile filter system
means less interior hood space to be
cleaned
o Canopy interior is completely lined in
stainless steel for increased rigidity,
seamless appearance, and easy
cleaning
o Separate removable trough catches
liquefied grease
• 50-watt halogen lights with dimmer
control
o Power switch and dimmer control are
separate, allowing you to leave
dimmer at favorite position
VWH4878T
48”W. Hood (for 41”W. grills)
VWH6078T
60”W. Hood (for 53”W. grills)
VWH3678T
36”W. Hood (for 30”W. grills)
VWH4878T
48”W. Hood
(for 41”W. grills)
VWH6078T
60”W. Hood
(for 53”W. grills)
VWH3678T
36”W. Hood
(for 30”W. grills)
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
✪
Please see
Installation Notes
and Accessories for
important
information,
including ventilator
kits, duct covers,
and back splashes.
Dimensions & Specifications
PRODUCT DIMENSIONS
A
18”
(45.7 cm)
12”
(30.5 cm)
6”
(15.2 cm)
27”
(68.6
c
m)
12”
(30.5
c
m)
Model Hood Duct Cover Lights Filters Heat Approx.
Width (A) Depth (B) Width Depth Height Lamps Ship. wt.
VWH3678T 35-7/8” (91.1 cm) 27” (68.6 cm) 35-7/8” 12” 12” 2 2 1 74 lbs.
(91.1 cm) (30.5 cm) (30.5 cm) (33.3 kg)
VWH4878T 47-7/8” (121.6 cm) 27” (68.6 cm) 47-7/8” 12” 12” 3 3 2 94 lbs.
(121.6 cm) (30.5 cm) (30.5 cm) (42.3 kg)
VWH6078T 59-7/8” (152.1 cm) 27” (68.6 cm) 59-7/8” 12” (30.5 cm) 12” 4 4 2 114 lbs.
(152.1 cm) (30.5 cm) (30.5 cm) (51.3 kg)
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
30”min.
(76.2 c
m)
36”max.
(91.4 cm)
66”min.
(167.6 cm)
72”max.
(182.9 cm)
36 ”
(91.4 cm)
Dimensions & Specifications
CLEARANCE DIMENSIONS
Note: Viking Outdoor hoods must be installed in a covered, non-enclosed area, and should be protected from the elements as much
as possible.
The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood should be installed 4-1/2” (11.4
cm) plus the distance between the back trim and surface from the back wall. (Note: There is a 3” minimum clearance from the back
trim to non-combustible surfaces, and a 24” minimum to combustible surfaces.) This will require building the hood out from the wall.
Any combustible material used for this purpose must be covered with locally-supplied stainless steel. Viking also recommends using a
backsplash.
Proper installation/ ducting is
extremely important to ensure
maximum performance. Use a qualified
and trained installer.
DUCTING
• Check with a qualified and
trained installer or local codes
for makeup air requirements, if
any.
• Max. duct run
o For 1,200 CFM—50’ (15.2 m)
o For 1,500 CFM—75’ (22.9 m)
o Duct run length is for
general reference only; for
longer duct runs, increase
duct size and contact a
qualified and trained
installer.
o The 1,500 CFM ventilator
should be used with longer
duct runs.
o Straight runs and gradual
turns are best; for example,
each 90° elbow is equivalent
to 5 – 10 feet (1.52 – 3.05
cm) of straight run.
• 10” duct run for 900 – 1500
CFM
o Never use flexible duct; it
creates back pressure/air
turbulence and greatly
reduces performance.
ELECTRICAL
• Hardwire direct with two-wire
with ground
• 120 VAC/60 Hz
PLUMBING
Not applicable
GAS
Not applicable
VWH4878T
48”W. Hood (for 41”W. grills)
VWH6078T
60”W. Hood (for 53”W. grills)
VWH3678T
36”W. Hood (for 30”W. grills)
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
UTILITY
REQUIREMENTS
Installation Requirements
Model Ventilator Kits Duct Size Max. Amps*
Interior Exterior Interior Exterior Interior Exterior
VWH3678T VIV1200 VEV1200/1500 10” (25.4 cm) 10” (25.4 cm) 8.7 6.1/6.8
VWH4878T VIV1200 VEV1200/1500 10” (25.4 cm) 10” (25.4 cm) 11.5 8.8/9.5
VWH6078T VIV1200 VEV1200/1500 10” (25.4 cm) 10” (25.4 cm) 11.5 8.8/9.5
*Maximum amp rating for hoods includes recommended ventilator kit rating.
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
OUTDOOR—VENTILATION
Built-In 18”H. Wall Hood
Recommended Ventilator Kits
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
• See ventilation product pages (indoor) for more information and additional specifications
Duct Covers
• Stainless Steel (SS)
• Constructed of 18-gauge stainless steel
• 12”D.
• Extends height of hood by 12”—conceals duct
Backsplashes
• Stainless Steel (SS)
• 30”H.
• Backsplashes protect the wall space below hood
• Create a continuous finish between cooking surface and hood
• Low maintenance, easy to clean
• Hemmed edges with screw holes
• Kit includes backsplash and fastening screws
Compliance Information
WARRANTY SUMMARY*
• One-year full warranty—complete product
• Five-year limited warranty—ventilator motor
• Lifetime limited warranty—rust through on all stainless-steel components
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see
Use & Care Guide
.
Warranty valid on Viking products shipped within the United States and Canada.
✪
Installation Notes & Accessories
Model Description Approx. ship wt. lbs. (kg)
VIV1200 1,200 CFM interior-power 43 (19.4)
VEV1200 1,200 CFM exterior-power 53 (23.9)
VEV1500 1,500 CFM exterior-power 47 (21.3)
Model Description Approx. ship wt. lbs. (kg)
DCW36T Outdoor 36”W. duct cover 11 (5.0)
DCW48T Outdoor 48”W. duct cover 14 (6.3)
DCW60T Outdoor 60”W. duct cover 24 (10.8)
Model Description Approx. ship wt. lbs. (kg)
BKS36 36”W. backsplash 9 (4.1)
BKS48 48”W. backsplash 14 (6.3)
BKS60 60”W. backsplash 20 (9.0)
Loading...