Viking VWH53048BK, VCCI6608BK, DCW30SS, DCW36SS, DCW48BK Installation

...
F1656B EN
(031308J)
Viking Installation Guide
Built-In Rangehood Accessories
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
BACKSPLASH
The backsplash is used to cover the wall space between the top of the backguard or high shelf and the bottom of the hood.
Place the backsplash in the desired location. Secure to the wall by placing the screws that are provided in the holes on the backsplash. When screws are used to fasten the panel to materials other than wood, the appropriate type anchor should be used with the screws.
Backsplash
Screw holes
WARMING SHELF PANEL
Always install the warming shelf panel before installing the rangehood.
The warming shelf panel is usually placed on the wall just below the rangehood.
1. Place the bottom of the warming shelf panel in the desired location and secure to the wall.
2. Hook the bottom of the top section to the top of the bottom section and secure to the wall.
3. Install the rangehood so that it will rest on the top ledge of the warming shelf panel.
BOTTOM
TOP
Hook top section to bottom section
Hood should rest on this top ledge
HOOD DUCT COVER
1. Mount duct cover to the ceiling through the screw holes provided. Secure to solid ceiling joists to support the weight with the screws provided.
2. For wall hood models, after mounting the duct cover to the ceiling, attach the hood to the wall and then secure the hood to duct cover using the sheet metal screws provided.
3. For island hood models, after mounting the duct cover to the ceiling, secure the hood by tightening the bolts into the cage-nuts of the duct cover.
WALL RANGEHOOD DUCT COVER ISLAND RANGEHOOD DUCT COVER
Larger holes on
top
Smaller holes on bottom
sheet metal screws
bolts
Cage nuts on bottom
2 3
Loading...