Viking VBP30 User Manual

22 00 11 00 PP LL AA NN NN II NN GG GG UU II DD EE

TABLE OF CONTENTS

Outdoor SS Appliance Cabinet ID...............................................4-6

Outdoor SS Non-Appliance Cabinet ID..........................................6

Outdoor SS Cabinet Accessory ID...............................................7-8

Common Installations.................................................................9-14

Typical Kitchen Layout Packages.............................................15-25

Countertop Sizing Guidelines..................................................26-27

3

4

VQBO3021

VQBO4121

VQBO5322

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless
steel

• fully concealed door hinges

• Professional-style handles match Viking outdoor appliances

• drawers equipped with full extension slides

• optional toe kick included

• two-year limited warranty - door hinges and drawer slides

• lifetime limited warranty - all stainless steel components

*Note – grill is not included with the cabinet and must be purchased

separately. All cabinets must be installed with locally supplied countertop.

Model

Approx. Shipping wt. lb (kg)

186 (84.4)

235 (106.6)

279 (126.6)

VQBO3021 (30

1

¼4”W. x 297¼8”D. x 341/2”H. grill base) - For use with any Viking 30”W. outdoor T-Series or E-Series grill

VQBO4121(

41

7

¼

8”W. x 29

7

¼

8”D. x 34

1

/2”H. grill base

) - For use with any Viking 41”W. outdoor T-Series or E-Series grill

VQBO5322 (53

7

¼8”W x 297¼8”D. x 341/2”H. grill base) - For use with any Viking 53”W. outdoor T-Series or E-Series grill

VQWO3010

VQWO4120

VQWO5311

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless
steel

• fully concealed door hinges

• Professional-style handles match Viking outdoor appliances

• drawers equipped with full extension slides

• optional toe kick included

• two-year limited warranty - door hinges and drawer slides

• lifetime limited warranty - all stainless steel components

*Note – neither grill nor warming drawer is included with the cabinet and

must be purchased separately. All cabinets must be installed with locally
supplied countertop.

30”D. GRILL BASE WITH WARMING DRAWER ACCESS*

Model

Approx. Shipping wt. lb (kg)

171 (77.6)

226 (102.5)

265 (120.2)

VQWO3010 (30

1

¼4”W. x 297¼8”D. x 341/2”H. grill base with warming drawer)

For use with any Viking 30”W. outdoor T-Series or E-Series grill and 30”W. outdoor warming drawer access

VQWO4120

(

417¼8”W. x 297¼8”D. x 341/2”H. grill base with warming drawer

)

For use with any Viking 41”W. outdoor T-Series or E-Series grill and 36”W. outdoor warming drawer access

VQWO5311

(53

7

¼8”W. x 297¼8”D. x 341/2”H. grill base with warming drawer)

For use with any Viking 53”W. outdoor T-Series or E-Series grill and 36”W. outdoor warming drawer access

30”D. GRILL BASE*

VBBO2602

5

VBBO1601

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless steel

• fully concealed door hinges

• Professional-style handles match Viking outdoor appliances

• heavy-duty adjustable legs

• optional toe kick included

• two-year limited warranty - door hinges

• lifetime limited warranty - all stainless steel components

*Note - neither the VGSB or VGIB burners are included with the cabinet and must be
purchased separately. All cabinets must be installed with locally supplied countertop.

Model

Approx. Shipping wt. lb (kg)

104 (47.2)

VBBO1601 (15

5

¼8”W. x 297¼8”D. x 341¼2”H. side burner base) - For use with Viking outdoor double & infrared side burners

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless steel

• fully concealed door hinges

• Professional-style handles match Viking outdoor appliances

• heavy-duty adjustable legs

• optional toe kick included

• two-year limited warranty - door hinges

• lifetime limited warranty - all stainless steel components

*Note - no appliance is included with the cabinet and must be purchased separately. All
cabinets must be installed with locally supplied countertop.

30”D. WOK, REFRESHMENT STATION & 24”W. TRUSEAR INFRARED GRILLER BASE*

Model

Approx. Shipping wt. lb (kg)

160 (72.6)

VBBO2602 (26

3

¼8

”W. x 29

7

¼8

”D. x 34

1

/2”H. multi-use base) -

For use with Viking outdoor wok, 24”W. refreshment

center, 24”W. griller, or 24”W. side burner/rangetop

VURO2400

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless steel

• heavy-duty adjustable legs

• optional toe kick included

• lifetime limited warranty - all stainless steel components

*Note – refrigeration units are not included and must be purchased separately

30”D. UNDERCOUNTER REFRIGERATION BASE (for use with 15”W. & 24”W. Viking outdoor refrigeration products)*

Model

Approx. Shipping wt. lb (kg)

115 (52.2)

125 (56.7)

VURO2400 (24”W. x 30”D. x 34

1

/2”H. refrigeration base) - For use with Viking 15”W. refrigeration products

VURO3200 (

32”W. x 30”D. x 34

1

/2”H. refrigeration base

) - For use with Viking 24”W. refrigeration products

VURO3200

30”D. DOUBLE SIDE BURNER & TRUSEAR™ INFRARED GRILLER BASE*

6

VBO1811

VBO1830

VTPO1810

VSBO2402
VSBO3602

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless

steel

• fully concealed door hinges

• Professional-style handles match Viking outdoor appliances

• heavy-duty adjustable legs

• optional toe kick included

• two-year limited warranty - door hinges

• lifetime limited warranty - all stainless steel components

* All cabinets must be installed with locally supplied countertop. Sink is
not supplied with VSBO2402 or VSBO3602.

30”D. OUTDOOR STAINLESS STEEL BASE CABINETS*

Model

Approx. Shipping wt. lb (kg)

141 (63.7)

156 (70.8)

165 (74.8)

180 (81.7)

145 (65.8)

VBO1811(18”W. x 29

7

¼8”D. x 341/2”H. base cabinet) - For general use in cabinet runs

VBO1830(18”W. x 29

7

¼8”D. x 341/2”H. base cabinet) - For general use in cabinet runs

VSBO2402 (24”W. x 29

7

¼8”D. x 341/2”H. sink base cabinet) - For general use in cabinet runs

VSBO3602 (36”W. x 29

7

¼8”D. x 341/2”H. sink base cabinet) - For general use in cabinet runs

VTPO1810 (

18”W. x 29

7

¼

8”D. x 34

1

/2”H. trash pullout base cabinet

) - For general use in cabinet runs

VERO3200VEUO3202

• commercial-type construction, design and styling

• all cabinets are constructed completely of heavy-duty stainless
steel

• fully concealed door hinges

• Professional-style handles match Viking outdoor appliances

• heavy-duty adjustable legs

• optional toe kick included

• two-year limited warranty - door hinges

• lifetime limited warranty - all stainless steel components

*Note - ovens and refrigeration units are not included with the cabinet
and must be purchased separately.

30”D. ELECTRIC SMOKER OVEN & GAS OVEN TOWER WITH STORAGE OR REFRIGERATION ACCESS*

Model

Approx. Shipping wt. lb (kg)

295 (133.8)

271 (122.9)

295 (133.8)

271 (122.9)

VEUO3202(32”W. x 29

7

¼8”D. x 68”H. electric smoker oven tower with storage access) 30”W. electric smoker oven cabinet

VERO3200 (32”W. x 29

7

¼8

”D. x 68”H. electric smoker oven & 24”W. outdoor refrigerated beverage center tower) 30”W. electric smoker oven cabinet

VGUO3202(32”W. x 29

7

¼8”D. x 68”H. gas oven tower with storage access) 26”W. gas oven cabinet

VGRO3200 (32”W. x 29

7

¼8”D. x 68”H. gas oven & 24”W. outdoor refrigerated beverage center tower) 26”W. gas oven cabinet

VGRO3200VGUO3202

7

CABINET SIDE PANELS

Approx. Shipping wt. lb (kg)

16 (7.3)

15 (6.8)

33 (14.9)

VSP30 (

30”W. x 29

3

/4”H.

) - To finish the side of any base cabinet at the end of a run

VTHP30 (30”W. x 34”H. ) - Half oven tower side panel. For use when countertop runs into the oven tower
VTSP30 (30”W. x 68”H. ) - Oven tower side panel for use at the end of a run

• heavy-duty stainless steel

• used to finish sides of base cabinets at the end of the cabinet run

• fit flush into recessed sides of cabinets

• optional toe kick included

Model

FILLER STRIPS

Model

Approx. Shipping wt. lb (kg)

5 (2.3)

5 (2.3)

5 (2.3)

40 (18.1)

40 (18.1)

VCF90 (each side is 3”W.) - Corner filler strip. For use in 90° cabinet bends
VCF135 (

each side is 3”W.) - Corner filler strip. For use in 135° cabinet bends

VFLR4 (

4”W.) -

General filler strip used to separate appliance based cabinets

VOCF90 (each side is 4”W.) - outer corner filler strip used to connect two back panels at a

90º angle and add countertop support. Shipped with two unattached back panels

VOCF135 (each side is 4”W.) - outer corner filler strip used to connect two back panels at a

135º angle and add countertop support. Shipped with two unattached back panels

• attach between cabinets to separate cabinets and create turns

• sides are to be mounted flush with doors and not the cabinet face

• optional toe kick included

VFLR4

8

Please see installation examples on page 11 for more information on when to use these.

• heavy-duty stainless steel

• for use in custom island installations

• individual back panels for each Viking outdoor cabinet

•

3

¼4” thickness will add to the depth of the cabinetry

• optional toe kick included

VIKING BACK PANELS FOR USE IN CUSTOM ISLAND APPLICATIONS

Model

Approx. Shipping wt. lb (kg)

10 (3.7)

12 (5.4)

15 (6.8)

17 (7.7)

20 (9.1)

21 (9.5)

23 (10.4)

25 (11.3)

32 (14.5)

34 (15.4)

5 (2.3)

VBP16 (16”W. back panel) For use with VBBO1601
VBP18 (

18”W. back panel) For use with VBO1811/VBO1830/VTPO1810

VBP24 (24”W. back panel) For use with VSBO2402/VURO2400
VBP26 (

26”W. back panel) For use with VBBO2602

VBP30 (30”W. back panel) For use with VQBO3021/VQWO3010
VBP32 (32”W. back panel) For use with VURO3200
VBP36 (36”W. back panel) For use with VSBO3602
VBP41 (41”W. back panel) For use with VQBO4121/VQWO4120
VBP53 (53”W. back panel) For use with VQBO5322/VQWO5311
VTBP32 (32”W. x 68”H back panel) For use with electric smoker and gas oven towers.
VBPFLR4 (4”W. back panel) For use with VFLR4

VBP30

9

PLANNING YOUR VIKING OUTDOOR KITCHEN

Anticipate your requirements for your outdoor kitchen to get the most flexibility during its use. With a
complete Viking outdoor kitchen, you now have not only the most complete line of outdoor appli­ances, but also the cabinets that provide the same storage and organizational capabilities of an
indoor kitchen. Now you can prepare your appetizers, drinks and food outside while remaining part
of the group, rather than having to go inside.

When planning the outdoor kitchen layout, consider the flow of people during outdoor cooking
and entertaining as well as the flow from inside and outside the house. Since the kitchen is made up
of individual cabinets, they can be arranged in virtually any combination allowing for true customiza­tion.

Common Installations

(For actual assembly of individual cabinets, please refer to Viking installation instructions)

In General

The cabinets have been designed to be easily installed by contractor or consumer. The cabinets are designed completely of
stainless steel and provide a rich, contemporary look that complements Viking outdoor appliances. The cabinets are 34

1

/2” high

where the toe kick area is 4

1

/2”. Locally supplied countertops must be mounted on top. The leveling legs on each cabinet allow for

adjustments on uneven surfaces. The leveling legs allow for a minimum adjustment of 34

1

/4” and a maximum of 36”. Typically, the

first cabinet is placed at the highest point and the other cabinets are leveled from there. To gain the most flexibility from the kitchen
design, separate all appliances by at least one base cabinet or with available 4”W. fillers (VFLR4). Remember to account for the 8“
minimum the rotisserie motor requires for installation when placing cabinets next to a grill base. All cabinets are 30”deep.

The cabinets can be installed against a house, a masonry, a stucco half-wall or freestanding in an island configuration. A stainless
side panel (VSP30) is available to finish ends where a wall doesn’t exist. Each cabinet is leveled using the attached leveling legs and
then together. Choose a countertop material of 1

1

/4” (like granite, quartz, etc.) or more (other stone, tile, etc.). If the countertop is

greater than 1

1

/4” thick, you should use shims (not included) to install the appliance (grill, side burner, wok) flush to the countertop.

After the countertop is installed the appliances are placed in them and the kitchen is complete.

(Note: The full weight of the appliance must be set on the solid bottom support, including shims if necessary, and not supported by the countertop side trim.)

Against a non-combustible surface

When installing a run of cabinets that includes a grill base against a non-combustible surface, the back of the cabinets should be
at least 3” from the wall to insure meeting the grill specifications. When this is the case, a 4”W. back panel (VBPFLR4) along with a
30” Side Panel (VSP30) can be used to finish the end of the cabinet run. The VBPFLR4 is screwed into the back of the cabinet that
ends the run and matches up against the VSP30. As shown in the example below, there may be instances when an oven tower ends
the cabinet run. When this is the case, a 30”W./68”H. side panel (VTSP30) will be used to end the run and a 30”W./34”H. half side
panel (VTHP30) will be used on the side of the oven tower cabinet that the countertop runs into. All of the other cabinets are installed
on either or both sides of the grill cabinet flush to its face.

VBPFLR4 (stainless facing out)

VEUO3202

VTSP30

WALL OF HOUSE

VQBO5322VBO1811 VBO1830

VBPFLR4 (stainless facing out)

VSP30

VTHP30

10

Example:

Against a non-combustible surface when refrigeration is used

If any of the undercounter refrigeration products are installed in the cabinet run, either a VURO2400 or VURO3200 should
be installed to allow for solid installation of the side panel and to make a strong base on which the countertop will sit. If
the refrigeration falls in the end of a run a, 30”W. side panel (VSP30) should be used. If used in conjunction with a Viking
outdoor grill, a VBPFLR4 should be used along with the VSP30 to insure meeting grill specifications (see page 9 exam­ple).

VQBO4121

NON-COMBUSTIBLE

SURFACE

VSP30

VSP30

VBPFLR4 (stainless facing out)

15"W. OUTDOOR REFRIGERATION SLIDES IN

VURO2400 VBO1811

VBPFLR4 (stainless facing out)

VBO1830

PLANNING YOUR VIKING OUTDOOR KITCHEN

11

Example:

Island Installations

The cabinets can also be installed in an island format. If desired, a half-wall can be built at the back and side panels (SP30)
can be used to finish the sides. All the cabinets will be lined up flush at the face, or a 3-sided half-wall could be built to
eliminate the side panels.

Alternatively, islands can be finished with Viking produced back panels. There are individual panels made to fit each indi­vidual cabinet offered by Viking. The result is a smooth, custom fit finish.

Example without oven cabinet ending run:

Example with oven cabinet:

As shown in the example below, there may be instances when an oven tower ends the island cabinet run. When this is the case, a

29

3

¼4”W./68”H. side panel (VTSP30) will be used to end the run and a 30”W./34”H. half side panel (VTHP30) will be used on the side

of the oven tower cabinet that the countertop runs into. A 32”W./68”H. back panel (VTBP32) will also be used on the rear of the unit.

Example when refrigeration ends the run:

VBBO1601VBO1830

VSP30

VBO1811VQBO3021

VERO3200

VFLR4

VTSP30

VTBP32

VTHP30

VBPFLR4*

VSP30

VQWO3010

15"W. REF. PRODUCT SLIDES IN

VSP30

24"W. REF. PRODUCT SLIDES IN

VBBO1601

VBP32 VBP16 VBPFLR4* VBP30 VBP24

VURO3200

VURO2400

VFLR4

VQBO5322VBO1811

VSP30

VSP30

VSBO2402

VBP18

VBP53 VBP24

PLANNING YOUR VIKING OUTDOOR KITCHEN

12

*Please note: If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel.

Installations Requiring a 4”W. Filler Strip

There are several situations where 4”W. back panel (VBPFLR4) and back panels need to be used. The VLFR4 is a 4”W.,
34

1

¼2”H. (includes 41¼2” toe kick area) stainless steel “post” sandwiched between two cabinets.

1) Use a 4”W. filler whenever two Viking appliances are installed side-by-side in the run. This will give the appliances

ample room for any clearance issues they may have in their general specifications. Remember that 8” is required for
proper installation of the rotisserie motor on a grill.

2) Use a 4”W. back panel whenever a Viking outdoor grill is used in a layout against a non-combustible surface (such as

a brick wall). The general specifications for the grill require 3” of space between the back of the grill and any
non-combustible surface. The 4”W. back panel accounts for this. (See sample drawing on page 9)

3) If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel.

4) Use the 4”W. filler whenever extra room in your cabinet layout is desired.

Installations Requiring 90º and 135º Inner and Outer Filler Strips

Many installations include a “turn” in the layout. These turns can follow a back wall, or they may exist in an island setting.
If a layout such as this is designed, 90 or 135 degree filler strips will need to be used.

IIMMPPOORRTTAANNTT

: When using a VCF90,
do not install a warming drawer base cabinet directly adjacent to a VBO1830 or VTPO1810. The cabinet drawers will not
be allowed to fully extend due to the warming drawer handle.

When to Use Inside Filler Strips by Themselves (see sample drawings below)

Use a 90° (VCF90) or 135° (VCF135) inside filler whenever you have a 90 or 135 degree turn. If the layout is against a wall,
no outer corner filler will be needed. The countertop will run into the wall. Your locally-supplied countertop installer will
need to account for the void area underneath the countertop that falls in between the cabinets.

PLANNING YOUR VIKING OUTDOOR KITCHEN

VBPFLR4

(stainless facing out)

VSP30

VBO1811

VBBO1601

NON-COMBUSTIBLE SURFACE

VQBO3021

VFLR4

VCF90

VBO1811

VERO3200

VTBP32

NON-COMBUSTIBLE SURFACE

VTSP30

VBPFLR4

(stainless facing out)

13

When to Use Inside and Outside Filler Strips Together (see sample drawing below)

In situations where the back of your cabinet layout is exposed, such as in an island setting, inside and outside filler strips
will need to be used. Use a 90° (VCF90) or 135° (VCF135) inside filler whenever you have a 90 or 135 degree turn.
Depending on which turn you are accounting for, a 90° (VOCF90) or 135° (VOCF135) outer corner back panel assembly
must be used to complete the layout. These assemblies consist of a 4”W. stainless steel “post”, two mounting brackets,
and two stainless steel back panels.

The post is placed in the middle corner of the void area (see diagram below) and the back panels are attached to it. The
post gives support to the void area underneath the countertop that falls in between the cabinets. Next, the supplied
brackets are attached to the inside of the two adjacent cabinets in the run. The stainless steel back panels are then
attached to the brackets and fit flush with the back panels attached to the back of the cabinets to the right and left of the

VBBO1601

VSP30

VBP18

VQBO3021

VCF90

VBP18

VSP30

VSP30

VOCF90

VBO1811

VBO1830

VBP16 VBPFLR4 VBP30 VOCF90 Back Panel

VOCF90 Back Panel

VFLR4

PLANNING YOUR VIKING OUTDOOR KITCHEN

center post.

Example when using VCF135 and VOCF135 in an island setting:

The installation examples shown in this guide represent basic installations that may be encountered
in common installations. Please contact Viking, your Viking Dealer or your Viking Distributor with any
questions you might have regarding these or any other installations.

14

VBBO1601

VSP30

VBP18

VQBO3021

VCF135

VBO1811

VBP16 VBPFLR4 VBP30

VOCF135
Back Panel

VBO1830

VSP30

VBP26

VBP18

VFLR4

VOCF135

Back Panel

VOCF135

PLANNING YOUR VIKING OUTDOOR KITCHEN

15

A series of small, medium & large typical outdoor kitchen layouts, using the Viking stainless steel outdoor cabinetry product line.

TYPICAL KITCHEN LAYOUT PACKAGES

16

11/4” thick countertop pieces

supplied by local source

Elevation View

1 VQWO4120
1 VURO2400
1 VTPO1810
2 VSP30
2 VBPFLR4

1 VQWO4120
1 VURO2400
1 VTPO1810
2 VSP30
1 VBP41
1 VBP24
1 VBP18

VQWO4120

NON-COMBUSTIBLE

SURFACE

VSP30

VSP30

VBPFLR4
(stainless facing out)

15"W. OUTDOOR REFRIGERATION SLIDES IN

VURO2400

VBPFLR4

(stainless facing out)

VTPO1810

4“ Surface

4“

30“

VQWO4120

VSP30

VSP30

15"W. OUTDOOR REFRIGERATION SLIDES IN

VURO2400

VBP18

VTPO1810

3/4“

30“

VBP41VBP24

Island Installation

Wall Installation

11/4”

PACKAGE 5-3 (THREE CABINETS)

341/2”

17

11/4” thick countertop
pieces supplied by
local source

11/4”

341/2”

Elevation View

1 VQWO4120
1 VURO3200
1 VTPO1810
1 VBO1830
2 VSP30
2 VBPFLR4

1 VQWO4120
1 VURO3200
1 VTPO1810
1VBO1830
2 VSP30
1 VBP41
1 VBP32
2 VBP18

VSP30

VBPFLR4

VBPFLR4

24”W. Outdoor Refrigeration slides in

VSP30

3/4“

24”W. Outdoor Refrigeration slides in

Island Installation

Wall Installation

PACKAGE 5-4 (FOUR CABINETS)

4“

30“

30“

(stainless facing out)

VTPO1810

VSP30

VTPO1810

VSP30

VBO1830

VBO1830

NON-COMBUSTIBLE SURFACE

4“ Surface

VQWO4120

VBP41VBP18 VBP18

VQWO4120

(stainless facing out)

VURO3200

VURO3200

VBP32

18

11/4” thick
countertop
pieces
supplied by
local source

Elevation View

1 VQWO5311
1 VBO1830
1 VTPO1810
1 VSBO2402
1 VURO3200
2 VSP30
2 VBPFLR4

1 VQWO5311
1 VURO3200
1 VTPO1810
1 VBO1830
1 VSBO2402
2 VSP30
1 VBP53
1 VBP32
1 VBP24
2 VBP18

Island Installation

Wall Installation

11/4”

341/2”

PACKAGE 5-5 (FIVE CABINETS)

30“

VBPFLR4
(stainless facing out)

4“

VSP30

VBO1830

VQWO5311

NON-COMBUSTIBLE SURFACE

4“ Surface

VTPO1810

(stainless facing out)

VURO3200

VBPFLR4

VSBO2402

VSP30

30“

3/4“

24”W. Outdoor Refrigeration slides in

VBP18 VBP53 VBP18 VBP32 VBP24

VSP30

VBO1830

VQWO5311

24”W. Outdoor Refrigeration slides in

VTPO1810

VURO3200

VSBO2402

VSP30

19

11/4” thick
countertop
pieces
supplied by
local source

Elevation View

1 VQWO5311
1 VBO1830
1 VTPO1810
1 VSBO2402
1 VURO3200
1 VURO2400
2 VSP30
2 VBPFLR4

1 VBO1830
1 VSBO2402
1 VQWO5311
1 VURO2400
1 VTPO1810
1 VURO3200
2 VSP30
2 VBP18
2 VBP24
1 VBP32
1 VBP53

Island Installation

Wall Installation

PACKAGE 5-6 (SIX CABINETS)

11/4”

341/2”

VBPFLR4
(stainless facing out)

4“

VSBO2402

30“

VSP30

VBO1830

VTPO1810

NON-COMBUSTIBLE SURFACE

4“ Surface

VQWO5311

(stainless facing out)

VURO2400

VBPFLR4

VURO3200

VSP30

24”W. Outdoor Refrigeration slides in15”W. Outdoor Refrigeration slides in

3/4“

30“

VBP24 VBP18 VBP18 VBP53 VBP24 VBP32

VSBO2402

VSP30

VBO1830

VTPO1810

VQWO5311

VURO2400 VURO3200

24”W. Outdoor Refrigeration slides in15”W. Outdoor Refrigeration slides in

VSP30

20

11/4” thick
countertop
pieces
supplied by
local source

Elevation View

1 VURO3200
1 VSBO2402
1 VTPO1810
1 VQWO4120
1 VBBO1601
1 VBO1830
1 VEUO3202
1 VFLR4
1 VSP30
1 VTSP30
1 VTHP30
2 VBPFLR4

1 VURO3200
1 VSBO2402
1 VTPO1810
1 VQWO4120

Island Installation

Wall Installation

1 VBBO1601
1 VBO1830
1 VEUO3202
1 VSP30

1 VTSP30
1 VTHP30
1 VTBP32
1 VFLR4

2 VBP18
1 VBP16
1 VBP41
1 VBP32

1 VBP24

PACKAGE 5-7 (SEVEN CABINETS)

11/4”

341/2”

4“

30“

VBPFLR4
(stainless facing out)

VURO3200

VSP30

VSBO2402

VTPO1810

24”W. outdoor refrigeration slides in

NON-COMBUSTIBLE SURFACE

4“ Surface

VBBO1601

VQWO4120

VFLR4
(stainless facing out)

VBO1830

(stainless facing out)

VBPFLR4

VTHP30

VEUO3202

VTSP30

3/4“

30“

VBPFLR4

(stainless facing out)

VBP32 VBP24 VBP18 VBP16 VBP41 VBP18 VBP32

VSBO2402

VURO3200

VSP30

VTPO1810

24”W. outdoor refrigeration slides in

VBBO1601

VQWO4120

VFLR4
(stainless facing out)

VBO1830 VEUO3202

VTHP30

VTSP30

21

11/4” thick countertop pieces supplied by local source

Elevation View

1 VURO3200
1 VSBO2402
1 VTPO1810
1 VQWO4120
1 VBBO1601
1 VBO1830
1 VFLR4
1 VSP30
1 VBPFLR4
1 VBP41
1 VBP32
2 VBP24
1 VBP26
1 VBP18
1 VCF90
1 VOCF90
1 VBPFLR4

Installation

PACKAGE L-8 (EIGHT CABINETS)

11/4”

341/2”

30“

3/4“

VSP30

VURO3200

VBP24VBP32

VSBO2402

VBP24

VURO2400

VBP26 VBP18

VBB02602

VBO1830

VOCF90 Back Panel

VOID AREA

VCF90

VFLR4

(stainless facing out)

VBBO1601

VQWO4120

VTPO1810

VOCF90 Back Panel

VBPFLR4

VBP41

VBP18

VSP30

22

PACKAGE L-9 (NINE CABINETS)

11/4” thick countertop pieces supplied by local source

Elevation View

1 VGRO3200
1 VTPO1810
1 VSBO3602
2 VBO1830
1 VBBO2602
1 VBBO1601
1 VBO1811
1 VQWO5311
3 VSP30
1 VOCF90
1 VCF90
1 VBP26
2 VBP18
1 VBP16
1 VBP53
1 VTHP30
1 VTSP30
1 VFLR4
1 VBPFLR4
1 VTBP32

Installation

30“

VSP30

3/4“

VTSP30

VTBP32

VGRO3200

VQWO5311

VTHP30

VBP18

VTPO1810

VBP36 VBP18 VOCF90 Back Panel

VSBO3602

VBO1811

VBO1830

VCF90

(stainless facing out)

VSP30

30“

VOID AREA

VFLR4

VBBO2602

VBBO1601

VBO1830

VOCF90 Back Panel

VBP26

VBPFLR4

VBP16

VBP18

VBP53

VBP18

VSP30

3/4“

23

Plan and Elevations Graphic Symbols 3¼8” = 1’-0’

VQBO3021

VQBO4121

VQBO5322

VQWO3010

VQWO4120

VQWO5311

30”

53”

41”

30”

53”

41”

PLANNING YOUR VIKING OUTDOOR KITCHEN

30”

30”

41”

30”

53”

30”

30”

30”

53”

30”

41”

30”

VQWO3010

VQWO4120

VQWO5311

VQBO3021

VQBO4121

VQBO5322

24

Plan and Elevations Graphic Symbols 3¼8” = 1’-0’

PLANNING YOUR VIKING OUTDOOR KITCHEN

VBBO2602

VBBO1601

VURO2400

VURO3200

16”

30”

VBBO1601

26”

30”

VBBO2602

24”

30”

VURO2400

32”

30”

VURO3200

VERO3200VEUO3202 VGRO3200VGUO3202

32”

30”

VEUO3202

32”

30”

VERO3200

32”

30”

VGUO3202

32”

30”

VGRO3200

25

Plan and Elevations Graphic Symbols 3¼8” = 1’-0’

PLANNING YOUR VIKING OUTDOOR KITCHEN

26

COUNTERTOP SIZING GUIDELINES FOR WALL INSTALLATIONS

While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet
layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations:

1. Depth of counter, with a

3

¼4” nominal overhang, will be 34 3¼4” when 4” fillers (VFLR4) are used against house walls.

The depth will be 30

3

¼4” when no fillers are used. Note: Fillers must be used if a grill is installed in the cabinet run.

2. Notches in the countertop front edge (

1

¼2” x 11¼2”) are required at all grill, side burner, and wok burner cutouts.

3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and

adding

3

¼4” for each end overhang, and 3/4” for each back panel (if a 90º layout has exposed (island) backs. No

dimension should be added for side panels (VSP30), as they fit flush into the cabinet end.

4. Countertop thickness should be 1

1

¼

4”. Any thicker countertop will require that grills, wok burners and side burners

be

shimmed (shims locally supplied), to install flush with the tops.

PLANNING YOUR VIKING OUTDOOR KITCHEN

27

COUNTERTOP SIZING GUIDELINES FOR ISLAND INSTALLATIONS

While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet
layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations:

1. Depth of counter, with a

3

¼4” nominal overhang, front and back, will be 32 1¼4”

2. Notches in the countertop front edge (

1

¼2” x 11¼2”) are required at all grill, side burner, and wok burner cutouts.

3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and

adding

3

¼4” for each end overhang, and 3/4” for each back panel (if a 90º layout has exposed (island) backs. No

dimension should be added for side panels (VSP30), as they fit flush into the cabinet end.

4. Countertop thickness should be 1

1

¼4”. Any thicker countertop will require that grills, wok burners and side burners

be

shimmed (shims locally supplied), to install flush with the tops.

PLANNING YOUR VIKING OUTDOOR KITCHEN

0310