Viking SD5300SS, AD52820SS, AD51620SS Installation
Viking Use/Installation Guide
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F00000
(XXX000)
Outdoor Access Doors
and Storage Drawers
For Single Access Door (AD51620): Only notch the side where the hinge is located. Door can
be mounted with left or right door swing.
*Before centering doors in opening, make the notches in all four corners for double access doors and only in the hinge
side for single access doors. The notches need to be 1” long x 2” wide. Attach with the four screws that are provided.
3
AD52820 AD51620
A (includes notches)
28-1/4” (71.8 cm) Min.
30-1/4” (76.8 cm) Max.
16-1/4” (41.3 cm) Min.
18-1/4” (46.4 cm) Max.
B (opening only)
20-1/4” (51.4 cm) Min.
20-1/2” (52.1 cm) Max.
20-1/4” (51.4 cm) Min.
20-1/2” (52.1 cm) Max.
Cutout Dimensions (Access Doors)
•Before beginning, please read these instructions completely and carefully.
•The installer should leave these instructions with the consumer for future reference.
UNPACK
1. Locate the unit near installation area.
2. Remove all banding from around carton.
3. Remove all tape and packaging material from the outside and inside of the storage drawer.
4. Keep all carton packaging until your storage drawer has been thoroughly inspected and found to be in good condition.
IMPORTANT– Please Read and Follow Cutout Dimensions (Storage Drawers)
30” W. 36” W.
A
28” (71.1 cm) 33-3/4” (85.7 cm)
A
2
notch*
B
(5.1 cm)
2”
1”
(2.5 cm)
A
(2.5 cm)
1”
2”
(5.1 cm)
9-1/4”
(23.5 cm)
A
23 3/8”
(59.4 cm)
1”
(2.5 cm)
notch*
Loading...