Viking PHK528SS Installation Guide

Installation

GUIDE

®

5 SERIES

Professional Handle Kit

For Use with All Refrigerators/All Freezer

PHK528SS

IMPORTANT - Please Read and Follow!

• Before beginning, please read these instructions completely and carefully.

• Use caution during assembly to minimize scratches.

• Do not remove permanently a xed labels, warnings or plates from the product. This may void the warranty.

• Please refer to the Installation Instructions for more information on installing the refrigerator/freezer door panel.

• The installer should leave instructions with the customer who should retain for local inspector’s use and future reference.

Installation with Wooden Full Overlay Custom Door Front

Parts Included

Part Quantity

Professional Handle tube (1)

Professional End Caps (2)

1/4” x 1” (0.6 cm x 2.5 cm)
Phillips Head Screws

063929-000 Install Guide (1)

(4)

Required Tools

Electric Drill
5/16” (.8 cm) Drill Bit
5/8” (1.6 cm) Spade or Forstner Bit (Counterbore)
Tape Measure
Phillips Head Screwdriver
Masking Tape and Pencil
Rubber Mallet

To Install:

1. Locate the wooden custom panel.

2. Using the illustrations on the next page, layout the handle location on the panels. It is recommended that masking tape be
placed where the four holes will be drilled to help mark the hole placement and to prevent any damage to the door when drill­ing the holes.

3. The Professional handle will be mounted using (4) of the 1/4” x 1” Phillips head screws provided. Using the 5/16”(.8 cm) drill bit,
drill completely through the door in the hole locations. Using the 5/8” (1.6 cm) bit, counter-bore two holes 1/4” (.6 cm) deep on
the BACKSIDE of the custom door panel.

4. Place a handle end cap on both ends of the handle tube. Tap the endcaps  rmly into place with a rubber mallet ensuring that
both endcaps mounting surfaces are parallel.

5. Align the holes in the endcaps with the holes on the panel and attach the Professional handle to the panel using the (4) 1/4”
(.6cm) screws provided.

Handle Installation

Custom Door
All Refrigerator / All Freezer
(Front View)

17-15/16”

(45.6 cm)

5/16” (.8 cm)

through-holes

with 5/8” x 1/4”

counterbore

*See section A-A.

27-1/16”

(68.7 cm)

AA

1-1/8” (2.85 cm)

1-9/16” (4.0 cm)

5/8” (1.6 cm) Ø x 1/4” (.6 cm) counterbore

1-1/8” (2.85 cm)

5/16” (.8 cm) Ø through-holes

3/4” (1.8 cm)
Full Overlay Panel

Viking Range, LLC

111 Front Street

Greenwood, Mississippi 38930 USA

[phone]

For product information,

call 1-888-(845-4641) or

visit our web site at vikingrange.com in the US or

brigade.ca in Canada

063929--000 EN (053017)