Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-845-4641
or visit the our web site at vikingrange.com
in the US and brigade.ca in Canada
Dishwasher
Door Panel Kit
F21018C EN
(111514)
3
Door Panel Installation (Purchased Separately)
2
Installation
3
x2
D
D
D
C
C
Remove plastic retainers from door panel
and discard.
Remove plastic mounting brackets from the
dishwasher and discard.
Carefully open the dishwasher door.
Remove the (2) white caps from holes (C)
and the (2) top screws from holes (D) on
dishwasher door
4
x4
D
D
Note: Verify the operation of the door
counterbalance springs after installation of the
door skin.
Note: Verify that the door does not hit the
kickplate. Adjust kickplate if necessary.
For FDW300/FDW300WS/FDW100 and
FDW100WS Models
The unit comes with everything needed to make installing the door panel easy.
What you will need:
#8 1-3/4” long, Stainless Steel
Phillips Head
Screwdriver
D
Phillips Head Screw
(4 supplied)
Dishwasher Door
1
Plastic
Retainers
D
2
C
C
Plastic
Retainers
Carefully secure the door panel to the
dishwasher through holes (D) using the four
flat PHD screws provided. Carefully tighten
all four screws and check to ensure that the
panel is square with the dishwasher door.
Do not over tighten screws.
cause damage to the inner door.
This may
5
Installation
2
x4
D
D
D
WARNING
The door skin must not obstruct the
fan exhaust vent.
Position door skin on front of dishwasher
door. Snap the plastic retainers on the door
skin into the holes (C) on dishwasher door.
While holding the door skin in position,
carefully open the dishwasher door. Using
the four truss head screws provided, secure
the door skin to the four holes (D) on the
dishwasher door.
3
x4
D
D
Carefully tighten all four screws and check
to ensure that the panel is square with the
dishwasher door.
Note: Verify the operation
of the door counterbalance springs after
installation of the door skin.
Door Panel Installation (Purchased Separately)
For FDB451 Model
4
pp
The unit comes with everything needed to make installing the door panel easy.
What you will need:
#8 1-3/4” long, Stainless Steel
Torx Driver
Truss Head Screw
(4 su
lied)
Dishwasher Door
D
C
1
C
Plastic
Retainers
D
D
C
D
Plastic
Retainers
76
Loading...