Viking P36BG8SS Installation

Installation Guide

Range/Rangetop Rear Island Trim / Backguard / High Shelf Accessories

Range Curb Base Fronts

2

Rear Trim Accessories

MODELS BACKGUARD HIGH SHELF CURB BASE

C/VGCC530
C/VDSC530
C/VESC530
C/VISC530
C/VGRT530

P30BG8SS

B30HS24SS P30CBF4SS

C/VGCC536
C/VDSC536
C/VGRT536

P36BG8SS B36HS24SS P36CBF4SS

C/VGCC548
C/VDSC548
C/VGRT548

P48BG8SS B48HS24SS P48CBF4SS

C/VGCC560
C/VDSC560
C/VGRT530

P601BG8SS B60HS24SS P60CBF4SS

C/RVGR3301
C/RVDR3301
C/RVER3301

RD301BG6SS

N/A

P30CBF4SS

3

(Illustration II)

Grasp the trim on each end and carefully place in the channels (B) located at each rear corner of the
product. Align the screw holes (A) at each end of the trim device with the holes (A) in each rear channel
of the product. Secure with the 4 enclosed screws.

RANGETOP
REAR VIEW

RANGE REAR

VIEW

(Illustration I)

HIGH SHELF

Rear Trim Accessories

ATTACHING REAR TRIM (Illustration I)

ATTACHING SHELF ON HIGH-SHELF (Illustration II)

All rear trim devices are installed in the same basic way.

Place the top rolled edge (X) over the front lip of the high-shelf back trim and secure with the 4
enclosed screws, two at each end.

WARNING

To reduce the risk of fire or injury to
persons, check to make sure all packaging
has been removed from the outside and
inside parts of the rear trim device before
installing. MAKE SURE ALL CORRUGATED
MATERIAL IS REMOVED FROM INSIDE
THE HIGH SHELF.

B

B

BB

A

A

X

A