Viking Installation Guide
Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20701A EN
Professional & Designer Oven Accessory
Flush Mount Kit
(040711)
Removing Existing Trim
Remove the existing side trim pieces from the oven. There should be one trim piece on each
side of the oven.
Removing Existing Trim
For Professional ovens, there will be a trim piece at the top and bottom of the oven that will
need to be removed. Also, on the Professional ovens, the door will need to be removed prior
to removing the lower vent trim and putting on the new trim.
NOTE: Keep the screws that are left after removing the existing side trim pieces. These
screws will be used to install the flush mount accessory trim pieces.
VESO
Single Oven
DDOE
Double Oven
2 3