Page 1
• Displays “Ringing”, “On-The-Phone” or
“Message Waiting” on PABX stations with
90V message waiting
• LED visible up to 100 ft (30m)
• Telephone line powered
• Attractive new compact package
• Connects with a modular cord or screw
terminals
• Easy to install
• Easy wall mounting with included doubleback tape
PPrraaccttiicce
e
T
T
EELLEECCOOM
M
S
S
OOLLUUTTIIOONNSSFFOORRTTHHE
E
221
1
SST
T
C
C
EENNTTUURRY
Y
TECHNICAL
TECHNICAL
The Viking model LPL-1 connects to any standard analog
phone line or phone system’s analog station port* to provide
visual “Ring” Indication, “On The Phone” indication and
“Message Waiting**” indication. The LPL-1 won’t have you
guessing which phone is ringing in busy offices. The large
flashing LED can be seen up to 100 feet away. When used
with a headset on an analog phone, you can end those nagging interruptions that occur when associates don’t realize
you are on the phone because you are using a headset. The
LPL-1 will light steady indicating to everyone that you are on
the phone, flash during ringing or fast flash to indicate message waiting**.
*Caution: The LPL-1 is not compatible with digital station ports.
**When installed on phone systems with standard 90VDC message waiting voltage.
Important: The LPL-1 is not designed to recognize stutter dial tone from any analog telephone company line or PABX.
FFeeaattuurrees
s
PPhhoonnee......771155..338866..8888661
1
SSppeecciiffiiccaattiioonns
s
LPL-1
LPL-1
Line Powered Off Hook,
Ring and Message
Waiting Indicator
December 28, 2012
iinnffoo@@vviikkiinnggeelleeccttrroonniiccss..ccoom
m
• Hearing impaired locations
• Call centers
• Telemarketing
• Product support groups
• Office cubicles
• Purchasing departments
• Sales offices
AApppplliiccaattiioonns
s
hhttttpp::////wwwwww..vviikkiinnggeelleeccttrroonniiccss..ccoom
m
Provide Line Powered Visual “Ring”,
“Off Hook” and Message Waiting Indication
Input: 80V DC to 150V DC message waiting voltage, minimum
40V AC ring voltage
Viewing Distance: 100 ft typical
Viewing Angle: 180° typical
Visual Indicator: 19mm (0.75”) high intensity red LED
Dimensions: 65mm x 35mm x 20mm (2.56” x 1.38” x .79”)
Shipping Weight: 0.45 kg (1 lbs)
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95%
non-condensing humidity
Cover Color: Beige
Connections: (1) RJ11 jack, (2) cage clamp terminals
Page 2
IInnssttaallllaattiioon
n
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666
Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Friday 8am - 5pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Technical Practice in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The
customer MUST be able to step through recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
Viking using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't
followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)
number. The customer MUST have a complete description of the problem, with all pertinent information regarding the
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
Viking Electronics, 1531 Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.
NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FIT-
NESS FOR ANY PARTICULAR PURPOSE.
EXCLUSION OF CONSEQUENTIAL DAMAGES
. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAM-
AGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD HEREUNDER.
EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY
. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL
BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING'S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.
IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED
AS SUCH.
IMPORTANT: Electronic devices are susceptible to lightning surges from the telephone line.
It is recommended that a surge protector be installed to protect against such surges.
!
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries
assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
DOD# 640
ZF302990 Rev A
Printed in the U.S.A.
PPrroodduuccttSSuuppppoorrttLLiinnee......771155..338866..8866666
6
FFaaxxBBaacckkLLiinnee......771155..338866..4433445
5
W
Waarrrraannttyy
Step 1. Disconnect the phone’s modular line cord from the wall jack.
Step 2. Connect a “T” adapter (phone line splitter) to the wall jack.
Step 3. Connect the phone’s modular cord to the “T” adapter and connect another
modular cord from the “T” adapter to the LPL-1 (see diagram below).
Step 4. Use the double-back tape to mount the LPL-1 to your wall desk, etc.
Internal View
of the LPL-1
CO Line, Analog Station
or VoIP Analog Port
Modular Cord
Connection
- OR -
CO Line,
Analog Station or
VoIP Analog Port
Hardwire
Connection
CO Line,
Analog Station or
VoIP Analog Port
Optional Headset
(not included)
Analog Phone
(not included)
Modular Cord (not included)
Wall Mounted
LPL-1
"T" Adapter
(not included)
Loading...