CUSTOM PANEL–REFRIGERATION
Built-In 42”W. Side-By-Side Refrigerator/Freezer &
Refrigerator/Freezer with Dispenser—DFSB423/423D
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
22-13/16”
(57.9 cm)
75-1/2”
(191.8
cm)
3/4”
(1.9 cm)
3/4”
(1.9 cm)
18-3/16”
(46.2 cm)
22-13/16”
(57.9 cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
18-3/16”
(46.2 cm)
31-5/8”
(80.3 cm)
10-11/16”
(21.7 cm)
12-3/8”
(31.4 cm)
3-5/32”
(8.0 cm)
3/4”
(1.9 cm)
DFSB423 DFSB423D
DFSB423
Note: Panel overlays must be dry, solid, straight one piece panels. The use of multiple panel pieces to achieve the dimensions is not
recommended.
Note: A 1/4” wood filler or insulation filler must be used between the door and 3/4” wood panel to prevent condensation from forming. The dimensions of the 1/4” wood filler are 1/4” smaller than the dimensions shown.
Dimensions & Specifications
DFSB423/423D
Overall panel width
Refrigerator front 22-13/16” (57.9 cm)
Freezer front 18-3/16” (46.2 cm)
Overall panel height 75-1/2” (191.8 cm)
Overall panel depth 3/4” (1.9 cm)*
Maximum panel weight
Refrigerator front 40 lbs. (18.1 kg)
Freezer front 35 lbs. (15.9 kg)
*Panel thickness must not exceed 1” (2.5 cm) on hinge side. Thicker panels will interfere with door swing and clearance.
CUSTOM PANEL DIMENSIONS
DFSB423D
CUSTOM PANEL–REFRIGERATION
Built-In 42”W. Side-By-Side Refrigerator/Freezer &
Refrigerator/Freezer with Dispenser—DFSB423/423D
PLANNING AND DESIGN GUIDE
VIKINGRANGE.COM • 1-888-VIKING1
RELEASED 12/1/07
©2007 VRC—INFORMATION SUBJECT TO CHANGE
Dimensions & Specifications
DFSB423 DFSB423D
CUSTOM SIDE PANEL DIMENSIONS
Note: Adding a 3/4” (1.9 cm) side panel adds an additional 3/4” (1.9 cm) to the overall width of the product for each side panel.
Requires side panel hardware kit (Kit model number – SPHKDS)
DFSB423/DFSB423D
Overall panel width 3/4” (1.9 cm)
Overall panel height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.*
Overall panel depth 24” (61.0 cm)
*Depending on how high leveling feet are raised and cabinet enclosure height.
3/4”
(1.9 cm)
End panel
1”
(2.5 cm)
1/4”
(0.6 cm)
Z-Bracket
21-3/4”
(55.2 cm)
21-3/4”
(55.2 cm)
24”
(61.0 cm)
Optional kickplate notch
Dimensions determined by cabinets
24”
(61.0 cm)
82-7/8”
(210.5 cm) min.
to
84-1/16”
(213.5 cm) ma
x.*
82-7/8”
(210.5 cm) min.
to
84-1/16”
(213.5 cm) max.*