Viking DFSB542, DFFB536L, DFRB530L, DFRB536L, DFSB542D Installation Manual

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

[phone]

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

F20688A EN

(032610)

Viking Installation Guide

DDHKDFSB5/DDHKDFBB5

Designer Handle Kit

For Use with DFSB5 and DFBB5 Built-In Full Overlay Refrigerators

IMPORTANT–Please Read and Follow!

2 3

• Before beginning, please read these instructions completely and carefully.

• Use caution during assembly to minimize scratches.

• Do not remove permanently affixed labels, warnings or plates from the product. This may

void the warranty.

• Please refer to the DFSB5 or DFBB5 Installation Instructions for more information on
installing the door panel.

• The installer should leave instructions with the customer who should retain for local
inspector’s use and future reference.

Parts Included

Part Quantity

Designer Handles
#10 x 3/4” Hex Head Screws
Installation Instructions

Required Tools

Electric Drill
3/16” (0.5 cm) Drill Bit
7/16” (1.1 cm) Spade or Forstner Bit (Counterbore)
Tape Measure
Hex Head Screw Driver
Masking Tape and Pencil

Handle Installation

To Install:

Installation with Wooden Full Overlay
Custom Door Front

(2)
(8)

1. Locate the wooden custom panel.

2. Using the illustrations on the next page, layout the handle location on the panels. It is
recommended that masking tape be placed where the four holes will be drilled to help mark
the hole placement and to prevent any damage to the door when drilling the holes.

3. Each Designer handle will be mounted using (4) of the #10 x 3/4” Hex head screws
provided. Using the 3/16”(0.5 cm) drill bit, drill completely through the door in the hole
locations. Using the 7/16” (1.1 cm) bit, counter-bore four holes 1/2” (1.2 cm) max. deep on
the BACKSIDE of the custom door panel.

4. Attach the Designer handle to the panel using (4) #10 x 3/4” screws provided.

5. Repeat steps 1 - 4 to attach other handle.

Specifications subject to change without notice.

A

A

13/16”

(

2.1 cm)

1

3/16”

(

2.1 cm)

13-1/8”

(33.3 cm)

38-19/32”

(

98.0 cm)

1

-1/2”

(

3.8 cm)

C

L

A

A

1-1/2” (

3.8 cm)

9-21/32”

(24.5 cm)

32-19/32”

(

82.8 cm)

13/16” (2.1cm)

2”

(5.1 cm)

13/16” (2.1cm)

26-7/16”

(67.2 cm)

Section A-A

3/4” (1.9 cm)

Full Overlay

Panel

3/16” (0.5 cm)
Thru Hole

7/16” (1.1 cm)
Counter Bore x 1/2”
Depth (max)

13/16”

(2.1 cm)

Custom Door

DFSB5 Side-by-Side (Front View)

Designer Handle

Custom Door

DFBB5 Bottom Mount (Front View)

Designer Handle