Viking 25AE User Manual
Designed, Manufactured and Supported in the USA
VIKING
COMMUNICATION & SECURITY SOLUTIONS
PRODUCT MANUAL
Cost Effective Speakers for
Indoor and Outdoor Use
The 25AE, 30AE, 35AE,
and 40AE paging
speakers provide
additional economical
paging coverage to
existing Viking paging
units (PA-2A, PA-15,
PA-30, PA-60, M2W) or
to any system with an 8
ohm output.
In outdoor, factory or
warehouse environments, 25AE paging
horns are the best method of producing
understandable sound. In these
environments the directional design allows
the installer to focus the sound cone down
aisles and toward work areas.
30AE 35AE 40AE 25AE
In office and restaurant environments, it is
best to distribute sound more evenly.
Ceiling mounted 30AE, 35AE, or 40AE
speakers in close proximity offer the best
distribution and are cost effective. The
35AE speakers include a volume control.
25AE/30AE/
35AE/40AE
Paging Horn and
Ceiling Speakers
November 1, 2018
Features
25AE Paging Horn
• Adjustable base for easy mounting and
directional adjustment
• Compact design for discreet mounting
30AE/35AE Ceiling Speakers
• Metal white grill for flush mounting in
office ceilings
• Mounting hardware included
• Excellent frequency response
• The 35AE includes a volume control
40AE Ceiling Speakers
• Attractive with a modern look
• Flush mounts into a 9.5” to 10” diameter
hole
• Integral mounting system
• Excellent sound quality
www.VikingElectronics.com
Information: 715-386-8861
Applications
• Add additional speakers and coverage
area to existing paging systems such as
Viking models:
- PA-2A (DOD 485)
- PA-15 (DOD 486)
- PA-30 (DOD 489)
- PA-60 (DOD 493)
- M2W (DOD 480)
• Add speakers to the DVA-2WA
• For greater intelligibility and louder paging
see Viking model 300AE Paging Horn
(DOD 497)
Specifications
See complete specifications on page 2.
A. 25AE Paging Horn
12.75"
overall diameter
11.25"
between mounting holes
8.1"
speaker diameter
2.75"
Specifications and Installation
Nominal Power: 12 Watts
Impedance: 8 Ohms
Connection: 69“ 24 awg Pigtail wire
Mounting Plate
Dimensions
(3) 0.244”
diameter
holes
Dimensions: 5” (127mm) diameter
Shipping Weight: 1.5 lbs (.68 kg)
Environmental: 5% to 95% non-
2.44”
1.87”
condensing humidity
Frequency Response: 600 Hz to
0.788” 0.788”
7000 Hz
Installation: The 25AE paging horn
2.77”
is designed to be surface mounted
to any rigid surface. Designed to meet IP53 ingress protection rating when mounted with horn pointing downward at least 45 degrees from horizontal.
B. 30AE/35AE Ceiling Speaker
Nominal Power: 6 Watts
Impedance: 8 Ohms
Connection: 6“ 16 awg Pigtail wires (35AE),
.25” Faston Terminal (30AE)
Dimensions: 12.75” x 3.75”
(324mm x 95mm)
Shipping Weight: 3 lbs (1.36 kg)
Environmental: 5% to 95% non-
condensing humidity
Frequency Response: 85 Hz to 15,000 Hz
Installation: Mounting hardware for the 30AE and 35AE ceiling speakers is included for easy
installation in drop ceilings or speaker enclosures. Flush mount into an 8.25” to 10.0” diameter hole.
5.0"
diameter
B. 40AE Ceiling Speaker
Nominal Power: 15 Watts
Impedance: 8 Ohms
Connection: .25” Faston Terminal
Dimensions: 10.6” x 3.6”(270mm
Push
10.6"
overall diameter
x 90mm)
Shipping Weight: 3 lbs (1.36 kg)
Environmental: 5% to 95% non-
condensing humidity
Frequency Response: 85 Hz to
15,000 Hz
Installation: The 40AE has an integral mounting system that requires only a phillips screw driver
to quickly flush mount the speaker into a 9.5” to 10” diameter hole. Before mounting the 40AE
speaker, push the four mounting brackets to pop off the grill as shown in the diagram.
3.6"
Loading...