2User ManualVisit the ViewZ USA website at https://www.viewzusa.com
SAFETY INSTRUCTION
Important Safety Instruction
1. Read all warnings.
2. Follow all instrucons to ensure longevity of Smart AD Box.
3. Do not place the Smart AD Box near water.
4. Clean only with dry cloth.
5. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
6. Do not install near any heat sources such as radiators, heat registers,stoves, or other heat generang
devices.
7. Do not override the safety purpose of the polarized or grounding-type plug.
8. A polarized plug has two blades with one wider than the other.
9. A grounding type plug has two blades and a third grounding prong.
10. The wide blade and the third prong are provided for your safety.
11. If the provided plug does not t into your outlet, consult with electrician for replacement of the outlet.
12. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles
and the point where it connects to the Smart AD Box .
13. Only use aachment/accessories specied by the manufacturer.
14. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the Smart
AD Box. When a cart is used, use cauon when moving the cart & Smart AD Box in combinaon to avoid
injuries.
15. Unplug the Smart AD Box during lightning storms or when unused for long periods of me.
16. Refer all servicing to qualied service personnel. Servicing is required when the Smart AD Box has been
damaged in any way.
The Smart AD Box shall not be exposed to dripping or splashing and objects containing liquids, such as vases
shall not be placed near the Smart AD Box.
The Smart AD Box should have ample distance (e.g. 10cm) from the wall for sucient venlaon.
3User ManualVisit the ViewZ USA website at https://www.viewzusa.com
SAFETY INSTRUCTION
Important Safety Instruction
Mark Indication and Substance
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage
within the Smart AD Box’s enclosure that may be of sucient magnitude to constute a risk
of electric shock to persons.
This symbol is intended to alert the user to the presence of important operang and
maintenance (servicing) instrucons in the literature accompanying the Smart AD Box.
Warning
• Do not use damaged or loose cables and plug.
• Do not pull the plug out by the wire nor touch the plug with wet hands.
• Use only a properly grounded plug and receptacle.
• Do not connect too many extension cords or plugs to one outlet.
• Do not excessively bend the plug and wire.
• Do not disconnect the power cord while it's sll plugged into the Smart AD Box.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or re.
• Never open the Smart AD Box. There are no user-serviceable parts inside and opening will void warranty.
• Removing covers may expose you to dangerous shock hazards or other risks.
• Keep any heang devices away from the power cable and Smart AD Box.
• Do not place the Smart AD Box near water.
• Do not insert objects of any kind into the Smart AD Box's open slots, as they may touch dangerous voltage points.
• Please follow the laws and regulaons of your municipality to dispose the Smart AD Box properly.
• Do not use the Smart AD Box in high temperature, humid, dusty or oily areas.
• Do not install the Smart AD Box where it will be exposed to connual vibraon.
• Keep the plasc packaging out of children’s reach.
• If any damage is detected upon rst opening the box, contact agency from which you bought the Smart AD Box
directly.
• If your Smart AD Box does not operate normally – in parcular, if there is any unusual sound or smell coming from
the Smart AD Box – unplug it immediately and contact an authorized dealer or the service center.
4User ManualVisit the ViewZ USA website at https://www.viewzusa.com
SAFETY INSTRUCTION
Important Safety Instruction
Caution
• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
• Make sure to unplug the power cord before cleaning the Smart AD Box.
• Make sure to leave a gap between Smart AD Box and wall.
• Do not drop the Smart AD Box when moving it.
• Place your Smart AD Box in a locaon with low humidity and minimum dust.
• Install the Smart AD Box base on a showcase or shelf so that the end of the base does not protrude from
the showcase or shelf.
• Do not place the Smart AD Box on an unstable or small surface area.
• Do not install inside a vehicle.
• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long me.
• Do not try to move the Smart AD Box by pulling on the power cord.
• Do not cover the vents on the Smart AD Box.
• When moving the Smart AD Box, turn o and unplug the power cord. Make sure that all cables, including
HDMI cable and cables connected to other devices, are disconnected before moving it.
• Place the Smart AD Box out of children’s reach, as they could damage it by hanging onto it.
5User ManualVisit the ViewZ USA website at https://www.viewzusa.com
FCC RF INTERFERENCE STATEMENT
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment
in a residenal area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio, TV technician for help.
• Only shielded interface cable should be used.
Finally, any changes or modicaons to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
► DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the
radio interference regulaon of Canadian Department of communicaons.
6User ManualVisit the ViewZ USA website at https://www.viewzusa.com
PACKAGE
Assembly Components - provided
Your ViewZ Smart AD Box is shipped with all proper installaon hardware and components. If there are parts missing
and/or damaged, please stop the installaon and contact ViewZ USA at (888)-998-4399.
Smart AD Box
(Qty 1)
DC 12V Power Supply (Qty 1)User Manual CD (Qty 1)
Remote Controller (Qty 1)
Flat Plate Mounng Kit (Qty 1)
C-Shape Plate Mounng Kit (Qty 1)
7User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONNECT EXTERNAL EQUIPMENTS
Interface Input Ports
The following image is the descripon of interface input ports
qwert yu
1. Micro SD Card IN
2. USB 2.0 IN x 2
3. USB 3.0 IN x 1
4. RJ 45 (Ethernet) IN
5. AUDIO OUT
6. DC 12V IN
7. ANTENNA
8. HDMI OUT
9. HDMI IN
io
8User ManualVisit the ViewZ USA website at https://www.viewzusa.com
REMOTE FUNCTION
Remote Controller
1. Power
2. Up
3. Le
4. Select
5. Right
6. Down
7. N / A
8. N / A
9. Sengs
10. Back
11. Home
12. Volume Up
13. Volume Down
q
w
e
r
t
y
u
i
o
a
s
d
f
Display image, sound and custom sengs can be adjusted in OSD (On Screen Display) menu by remote controller.
To adjust Smart AD Box seng value :
1. Press the 'Sengs' buon to enter the setup of running app
2. Press the 'Home' buon to go directly to the home screen
3. Press the 'Back' buon to go back the previous screen
4. Press the ▲ / ▼ / ◄ / ► buons to move your cursor on Android screen
5. Press the'OK' buon to select
6. Press the 'Volume Up & Down' buon to up / down audio volume
9User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
On ADBX, Front Area
qwer
1. Reset
Resets the android sengs to the factory default
2. IR Sensor
Sensor for the remote controller
3. LED Indicator
Blue color: Smart AD Box on
Red color : Smart AD Box o
4. Power
To turn the android system power on / o
10User ManualVisit the ViewZ USA website at https://www.viewzusa.com
WIRELESS CONNECTION
Caution
ViewZ Smart AD Box can connect to the internet or intranet via wireless. The wireless router lets you access from
your network anywhere within the operang range of your wireless network. However, the operang distance or
range of your wireless connecon can vary signicantly depending on the physical placement of your router. For
example, the thickness and number of walls the wireless signal passes through can limit the range.
Addionally, other wireless access points in and around your home might aect your router’s signal. Wireless
access points are routers, repeaters, WiFi range extenders, or any other device that emits a wireless signal for
network access.
Place your router near the center of the area where ViewZ Smart AD Box operate or place the router in an
elevated locaon, minimizing the number walls and ceilings between the router and ViewZ Smart AD Box.
Place ViewZ Smart AD Box away from electrical devices such as these:
- Ceiling fans, Home security systems
- Microwaves, Computers
- Base of a cordless phone, 2.4 GHz cordless phone
Place ViewZ Smart AD Box away from large metal surfaces, large glass surfaces, and insulated walls
such as these:
- Solid metal door, Aluminum studs
- Fish tanks, Mirrors, Brick, Concrete
ViewZ recommends using a wired connecon via RJ-45 for solid connecon speed & reliability.
Please do not use hot-spot device to connect Intenet. It looks like hot-spot device can let you connect Smart AD
PVM to the Internet. However, hot-spot devices can interfere with the normal IP/DNS address.
ViewZ strongly recommends using clean/normal router to provide Internet to Smart AD PVM.
11User ManualVisit the ViewZ USA website at https://www.viewzusa.com
SPECIFICATION
Model No.VZ-ADBX
HDMI®
Input Resoluon
Output Resoluon
Scailing
Custom Layout
PIP & POP
Rotaon
Schedule
Rao
Support Content Type
Video Format
Image Format
CPU
Android
Board
Operating Temperature
RAM / Memory
OS
Operating Humidity
2.0
Up to 4K@60Hz
Up to 4K@60Hz
Up to 4K@60Hz
Support
Support
Support ( 360° )
Support
Support - 16:9, 4:3, 5:4 & 16:4.5
Digital Clock, HTML, Streaming, Subtitle, Newsticker, Logo, Image & Video
MP4, AVI, MKV
JPG, PNG, BMP
Quad Core, ARM Cortex-A53 64bit
2GB DDR4 / 32 GB
Ver. 6.1.
14°F ~ 122°F / -10°C ~ 50°C
20 ~ 70% RH
Weight
INTERFACE
Safety & EMC Certification
Electrical
Ratings
Power Consumption
DC 12V IN
Accessories
Net : 2.75 lb / 1.24 kg
Gross : 1 lb / 0.45 kg
HDMI IN x 1, HDMI OUT x 1, USB IN x 3, MICRO SD Card(TF) IN x 1,
RJ-45(CMS) IN x 1, Audio OUT x 1
CE / FCC / ROHS
12 V 2.0A
≤ 8 W
HDMI cable, Power Supply & Cable, Flat Plate Mounting Kit,
12User ManualVisit the ViewZ USA website at https://www.viewzusa.com
TROUBLESHOOTING GUIDE
- Check the following before calling for service.
- If the same problems connue aer checking, contact the reseller you purchased the Smart AD Box from.
We recommend that you test with dierent input sources when you have trouble with
At start
No image or
Noise on the screen
the current input source. If symptom persists, follow the instrucons below. Aer
following the instrucons below, please contact us at 1-888-99-VIEWZ.
- Make sure the power cable is correctly plugged into the outlet
- Make sure the power cable is correctly plugged into the Smart AD Box
- Make sure the cable is correctly connected between Smart AD Box & source
- Check brightness and see if brightness is set to 'Ø'
- Check video source
Incorrect display or
Half display
Flickering and
shadow image
The audio funcon is
not working
LED is ickering
or no image
- Check your video source
- Reset video source : connecon, cable replacement, seng & more
- Check your input source setting for resolution and phase (Hz)
- Check the volume and make sure MUTE is not on
- Check HDMI / Audio port cable connection
- Check the interface cable connecon and make sure it's plugged in correctly
- Check the input source
13User ManualVisit the ViewZ USA website at https://www.viewzusa.com
TERMS OF WARRANTY / RMA
- The warranty period for this Smart AD Box is 3 years. The warranty will be voided for the scenarios listed below.
- You can also download the manual and informaon at VIEWZ web site: VIEWZUSA.COM
When power feed to the Smart AD Box exceeds capacity and causes damage
Accident, Abuse, Misuse, Neglect, Fire, Water/liquids, Lightning or any act of nature
Cases of
Damaged by dropping, throwing and hing the Smart AD Box
Non-Warranty
Coverage
* Above informaon can be changed without nocaon - please check our website or
contact ViewZ representave for latest RMA service policy.
* When shipping the Smart AD Box for RMA, make sure to pack safely to ensure the Smart AD Box is
not damaged during shipping.
Failure caused by users attempt to modify the product
Failure by limited life of parts such as LED Lamps and any other consumables
Damaged by using third party power cable, unstable power input and electric shock
14User ManualVisit the ViewZ USA website at https://www.viewzusa.com
NOTE
15User ManualVisit the ViewZ USA website at https://www.viewzusa.com
WARRANTY
ViewZ USA
LIMITED 3 YEAR WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
ViewZ USA warrants this product to be free from defects in material and workmanship for 3 years to the original owner of this
product. The limited warranty is valid only for the original purchaser of the product.
What ViewZ USA Will Do
At the sole discreon of ViewZ USA, ViewZ USA will repair or replace any product or product part that is defecve. If ViewZ USA
chooses to replace a defecve product or part, a replacement product or part will be shipped to you at no charge, but you must pay
any labor costs.
What is Not Covered; Limitaons
ViewZ USA disclaims any liability for damage to mounts, adapters, displays, projectors, other property, or personal injury resulng, in
whole or in part, from improper installaon, modicaon, use or misuse of its products.
ViewZ USA disclaims all other warranes, express or implied, including warranes of merchantability and tness for a parcular
purpose. ViewZ USA is not responsible for incidental or consequenal damages, including but not limited to, inability to use its
products or labor costs for removing and replacing defecve products or parts. Some states do not allow the exclusion or limitaon
of incidental or consequenal damage, so the above limitaon or exclusion many not apply to you.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in wring to the address below within
thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty
claims. Warranty claims must also include a descripon of the problem, the purchaser’s name, address, and telephone number.
General inquiries can be addressed to ViewZ USA Customer Service at 1-888-998-4399. Warranty claims will not be accepted over the
phone or by fax.
ViewZ USA
An: Warranty Claim
177 W. Orangethorpe Ave.
Placena, CA 92870
How State Law Applies
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
Disclaimer
ViewZ USA intends to make this manual accurate and complete. However, ViewZ USA makes no claim that the informaon
contained herein covers all details, condions or variaons, nor does it provide for every possible conngency in connecon with
the installaon or use of this Smart AD Box. The informaon contained in this document is subject to change without noce or
obligaon of any kind. ViewZ USA makes no representaon of warranty, expressed or implied, regarding the informaon contained
herein. ViewZ USA assumes no responsibility for accuracy, completeness or suciency of the informaon contained in this
document.
Contact Us
NORTH AMERICA
177 W. Orangethorpe Ave.
Placena, CA 92870
USA and Canada
Phone: 1-888-998-4399
Fax: 1-714-996-1138
Other Locaons