ViewZ VZ-42RTHL User Manual

24/27/32/42-INCH WUXGA

PREMIUM TFT-LED MONITOR

USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

SAFETY INSTRUCTION ………………………………………………………….…… 2 ~ 3

CAUTIONS …………………………………………………………….......................... 4

FCC RF INTERFERENCE STATEMENT ……………………………....................... 5

CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… 6

REMOTE FUNCTIONS ………………………………………………………………… 7

CONTROLS AND FUNCTIONS ……………………………………………………….. 8 ~ 15

MOUNTING GUIDE …………………………………………………………………….. 16

D-SUB CONNECTOR PIN ASSIGNMENTS ………………………………………… 17

POWER MANAGEMENT ……………………………………………………………… 18

SPECIFICATIONS ……………………………………………………………………… 19 ~ 20

TROUBLE SHOOTING GUIDE …………………………………………………......... 21

This Monitor was

Manufactured by ISO 9001

Certified Factory

INSTRUCTION MANUAL ………………………………………………………………………. 1

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

8. Do not install near any heat sources such as radiators, heat registers,stoves, or other

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

Important Safety Instruction

instructions.

apparatus (including amplifiers) that produce heat.

Apolarized plug has two blades with one wider than the other.

Agrounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement

of the bsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles and the point where they exit from the apparatus.

11. Only use attachment/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or

sold with the apparatus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus the apparatus has been exposed to

rain or moisture does not operate normally or has been dropped.

2 ………………………………………………………………………. INSTRUCTION MANUAL

- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed no the apparatus.

- Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation.

“WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.”

“The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.”

This symbol is intended to alert the user to the presence of uninsulated :

dangerous voltage with in the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating

and maintenance(servicing) instructions in the literature accompanying the

appliance.

.

INSTRUCTION MANUAL ………………………………………………………………………. 3

CAUTION

The power supply cord is used as the main disconnect device, ensure that the socket-outlet is
located/installed near the equipment and is easily accessible.

ATTENTIONN

Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être
située ou installée à proximité du matériel et être facile d`accès

NEVER REMOVE THE BACK COVER▶

Removal of the back cover should be carried out only by qualified personnel.

DO NOT USE IN HOSTILE ENVIRONMENTS▶

To prevent shock or fire hazard, do not expose the unit to rain or moisture.

This unit is designed to be used in the office or home. Do not subject the unit to vibrations,

dust of corrosive gases.

KEEP IN A WELL VENTILATED PLACE▶

Ventilation holes are provided on the cabinet to prevent the temperature from rising.

Do not cover the unit or place anything on the top of unit.

AVOID HEAT▶

Avoid placing the unit in direct sunshine or near a heating appliance.

TO ELIMINATE EYE FATIGUE▶

Do not use the unit against a bright back ground and where sunlight or other light sources will

shine directly on the monitor.

BE CARE▶ FUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.

Damage to a power cord can cause fire or electrical shock.

4 ………………………………………………………………………. INSTRUCTION MANUAL

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

- Consult the dealer or an experienced radio, TV technician for help.

connected.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by

the grantee or manufacturer could void the users authority to operate such equipment.

▶ DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital

apparatus set out in the radio interference regulation of Canadian Department of

communications.

INSTRUCTION MANUAL ………………………………………………………………………. 5

1. BACK PANEL CONTROL

1.1. 24 inch

2 103 1 4 5 6 7 8 9 11 12 13 14 15 16 17 18

1. DC12V OUT(CAMERA USE)

2. TRIGGER INPUT

3. COMPONENT AUDIO L/R IN

& COMPONENT Y/Pb/Pr IN

4. AUDIO OUT (Speaker)

5. PC AUDIO IN

6. PC RGB IN

7. DVI IN

8. HDMI1 IN

9. HDMI2 IN

1.2. 27/32/42 inch

10. AV2 AUDIO R/L IN

11. AV1, S-VIDEO AUDIO R/L IN

12. S-VIDEO OUT

13. S-VIDEO IN

14. AV2 OUT

15. AV2 IN

16. AV1 OUT

17. AV1 IN

18. AC IN (POWER)

1

2

3 4 5 6

1. TRIGGER INPUT

2. COMPONENT AUDIO L/R IN

& COMPONENT Y/Pb/Pr IN

3. AUDIO OUT (Speaker)

4. PC AUDIO IN

5. PC RGB IN

6. DVI IN

7. HDMI1 IN

8. HDMI2 IN

7 8 9

10 11 12 13 14 15 16 17 18

10. AV1, S-VIDEO AUDIO R/L IN

11. S-VIDEO OUT

12. S-VIDEO IN

13. AV2 OUT

14. AV2 IN

15. AV1 OUT

16. AV1 IN

17. DC12V OUT(CAMERA USE)

18. AC IN (POWER)

9. AV2 AUDIO R/L IN

6 …………………………………………….……………………………INSTRUCTION MANUAL

REMOTE CONTROLLER(Optional)

1. POWER(

Turns the power ON or OFF. There will be a few seconds delay before the display appears.

2. SOURCE

Selects an input source.

3. AUTO

Auto geometry adjustment in the RGB PC source.

4. HOLD

Stops the Trigger & Auto switching functions.

5. MUTE

Mutes the sound.

6. MENU

Activates and exits the On Screen Display.

7. EXIT

Exits the On Screen Display.

8. VOL( & )◀▶

Increases or decreases the level of audio volume.

9. UP/DOWN

Moves upwards or downwards in the OSD menu.

10. ENTER

Enters an OSD submenu or accepts your selection.

11. INFO

Displays the information about input source.

12. STILL

Pauses the picture.

13. PIP (Picture In Picture)

Activates the PIP mode.

14. P.INPUT

Changes the source of sub-picture in the PIP mode.

15. P.POS

Changes the position of sub-picture in the PIP mode.

16. P.SIZE

Changes the sizes of sub and main pictures in the PIP mode.

17. SWAP

Alternates between sub and main pictures in the PIP mode.

18. ARC (Aspect Ratio Control)

Selects a screen ratio.

19. APC (Auto Picture Control)

Selects a picture mode.

20. ACC (Auto Color Control)

Selects a color mode.

21. S.SET

Selects the source of sound between main and sub pictures in the PIP mode.

22. PC

Selects a PC mode(PC, DVI & HDMI).

23. AV

Selects an AV mode(AV1, AV2 & S-Video).

24. COMP

Selects the Component mode.

)

INSTRUCTION MANUAL ………………………………………………………………………. 7

FRONT KEY CONTROL

1 2 3 4 5 6 7 8 9

1. SOURCE/SELECT

Select PC or video.

Select On Screen Display menu.

2. MENU/EXIT

Activate and exit the On Screen Display.

3 / 4. ▼ / ▲

These buttons allow user to enter the sub-menu of the activated function.

The up(▲) button is HOLD function and stop the Trigger & Auto switching functions.

5 / 6. ◀ / ▶

Adjust the volume and menu settings.

7. POWER ON/OFF(

/ I )

Turns the power ON or OFF. There will be a few seconds delay before the display appears.

8. POWER LED

The power LED lights with green when the power is turned ON.

The power is turned off by pressing the power switch again and the power LED goes Red.

9. IR Sensor

Remote controller sensor.

8 ………………………………………………………………………. INSTRUCTION MANUAL

OSD MENU DESCRIPTION

All picture, sound settings and setup for the monitor can be adjusted in the OSD menu.

(On Screen Display)

To adjust the OSD screen:

1. Press the Menu button to enter the OSD menu.

2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted.

3. Press the button to enter the submenu for adjusting items.▶

4. Change the value you wish to adjust by using the ◀/▶ buttons.

5. Press the button to exit the submenu for ad◀ justing items.

6. Press the Menu button to exit the OSD menu.

A. Custom

Option Function Value

Brightness Adjusts brightness of the screen. 0 ~ 100

Contrast Adjusts intensity of the image. 0 ~ 100

1)

Color

Tint

Sharpness

1) Unavailable in RGB PC, DVI, HDMI1 and HDMI2.

2) Unavailable in Component mode and PAL system.

Adjusts color of the picture. 0 ~ 100

1) 2)

Adjusts tint of the picture. 0 ~ 100

1)

Adjusts sharpness of the picture. 0 ~ 100

INSTRUCTION MANUAL ………………………………………………………………………. 9

B. Picture/Sound

Picture Mode Sets picture mode. See table below

Color Tone Sets color tone. See table below

Mute Mutes speaker sound. Off or On

Option Function Value

Volume Adjust the level of audio volume. 0 ~ 100

Size Display picture size. See table below

1)

NR

Reduces noise of the picture. On or Off

3D Comb

3)

PC

2)

Activates the 3D comb filter. On or Off

See table below.

1) Unavailable in RGB PC, DVI, HDMI1 and HDMI2.

2) Unavailable in S-Video, RGB PC, DVI, HDMI1, HDMI2 and Component.

3) Only available in RGB PC.

Picture Mode

Custom Applies user selected values.(Brightness, Contrast, Color, Tint and Sharpness)

Dynamic Provides enhanced contrast and sharpness.

Standard Provides standard contrast and sharpness.

Movie Is recommended for viewing film-based content.

Mild Reduces contras and sharpness.

10 ………………………………………………………………………. INSTRUCTION MANUAL

Color Tone

Cool Gives the white color a bluish tint.

Normal Gives the white color a neutral tint.

Warm Gives the white color a reddish tint.

User To manually adjust the color tones(Red, Green, and Blue).

Size

4:3 Sets the image size to 4:3

Panorama

Zoom1

Zoom2

Wide Sets the image size to wide

Under

1)

1:1

1) Unavailable in RGB PC, DVI, HDMI1, HDMI2 and Component.

1)

Sets the image to panorama

1)

Expands the image size about two times to upward and downward

1)

Expands the image size about one and half times to upward and downward

2)

Adjusts the image size to display resolution without overscan

Adjusts the image size to input resolution with overscan

2) Unavailable in RGB PC.

PC

Option Function Value

Auto Adjust Auto geometry adjustment.

Phase Adjusts the number of horizontal picture elements. 0 ~ 100

H-Position Adjusts the horizontally picture position. 0 ~ 100

V-Position Adjusts the vertically picture position. 0 ~ 100

Frequency Adjusts the vertical noise of screen image. 0 ~ 100

INSTRUCTION MANUAL ………………………………………………………………………. 11

C. PIP

PIP Activates the PIP feature. Off or On

Input Source Selects the input source for the PIP area. See table below

Option Function Value

Enables 3 screen size.4:3 side by corner, 4:3 side by 4: 3,

PIP Mode

PIP, PBP1 or PBP2

and full screen side by side.

PIP Size Selects the size of PIP screen. Size1, Size2 or Size3

Selects the position of PIP screen. Right of Bottom, Left of

Position

RB, LB, LT or RT

Bottom, Left of Top and Right of Top.

Swap Alternates between the main and sub picture

Sound Select Selects the sound source from either the Main or PIP Main or Sub

Input Source

Main Sub

AV1, AV2 or S-Video AV1, AV2 or S-Video

RGB PC, DVI, HDMI1, HDMI2

Available

AV1, AV2 or S-Video

or Component

combination

RGB PC, DVI, HDMI1, HDMI2

AV1, AV2 or S-Video

or Component

Unavailable

RGB PC, DVI, HDMI1, HDMI2

RGB PC, DVI, HDMI1, HDMI2

combination

or Component

or Component

12 ………………………………………………………………………. INSTRUCTION MANUAL

D. Setup

Option Function Value

Reset

Resets the monitor settings to their

factory default.

Language Sets the language of the OSD menu.

Changes background of monitor menus.

OSD Tone

(e.g. input source & information)

Displays a blue screen if the monitor

Blue Screen

receives no signal.

Locks all buttons of the monitor.

Key Lock1)

Note: Use remote controller to unlock.

Trigger See table below

Auto Switching See table below

Image Rotation2) Activates the Image Rotation function. Off or On

1) How to unlock

① On the front key: Press the MENU and ▲ button at the same time over 3 seconds.

English, French, Deutsch,

Italian, Spanish, Portuguese

or Nederland

Transparency or On

Off or On

Off or On

② On the Remote Controller: The Remote Controller operates well because the Key Lock function is

only allowed for the front key of this product.

2) The displayed image is slightly moved to prevent image persistence when the Image Rotation function

is On. The user is able to adjust the image rotation time from 0~10Min. in the sub-menu of image

rotation.

※ Image persistence

When an LCD panel is continuously displaying the same image(graphic) for a long period of time, a trace

of the image can remain visibly. Image persistence is not a product defect, and all LCD products are

subject to image persistence.

INSTRUCTION MANUAL ………………………………………………………………………. 13

※ NOTICE: When watching moving images on a computer or a DVR through this monitor using a PC-

RGB, DVI or HDMI input, you can see blurred images on the edge of icons and pop-up windows but,

this is not a defect. The blur may appear on the fixed images such as another icon and pop-up window

because the 120Hz feature is focused on fast moving images to enhance the quality of moving image.

Motion Detection (Built-in PIR sensor; Passive Infra-Red)

Option Function Value

Trigger Enable Activates the trigger feature. Off or On.

AV1, AV2, S-Video, RGB PC,

Trigger Input Selects the input source for the Trigger.

DVI, HDMI1, HDMI2 and

Component

Activates an audible signal when the monitor

Buzzer

On or Off.

receives an trigger signal.

Selects the amount of time, in seconds,

Trigger Time

3 ~ 100.

that the monitor displays the trigger Input image.

Trigger Option Selects the type of physical trigger input. See table below.

Selects the mode in which the monitor displays

the Trigger Input. The monitor takes one of the

following actions:

- PIP & FULL: Displays the Trigger Input in the PIP

of the current video input source.

Display Type

PIP & FULL or FULL.

Note: The main video source must support the

Trigger Input source as a PIP option. See section

“Input Source” in “C. PIP”.

- FULL: Switches the display to show the Trigger

Input in the full screen.

14 ………………………………………………………………………. INSTRUCTION MANUAL

N/C(Normally Closed):

The Trigger function is activated when

the trigger cable is opened.

N/O(Normally Opened):

The Trigger function is activated when

the trigger cable is closed.

High:

The Trigger function is activated when

the trigger signal is DC 2~5[V].

Low:

The Trigger function is activated when

the trigger signal is DC 0~0.6[V].

Note: In this case, trigger port has high

status electrically, so the trigger cable

has to have ground( or earth) status to

be activated.

Auto Switching

Option Function Value

Auto Switching Activates the Auto Switching feature. Off or On

Input Enable

Time

Opens another menu and you can select the input

sources to include in the Auto Switching cycle.

Selects the amount of time, in seconds, that the

monitor displays each selected input source.

AV1, AV2, S-Video, RGB PC,

DVI, HDM1, HDMI2 and

Component

3 ~ 100

INSTRUCTION MANUAL ………………………………………………………………………. 15

Wall mounting (Optional)

The LCD monitors are suitable for VESA standard wall mount (not included in the delivery).

Screws

Screws

< 27/32 inch >

< 42 inch >

1. 27/32-inch: VESA 200mm x 200mm

2. 42-inch: VESA 600mm x 100mm x 100mm.

※ Attention!

- 27/32inch : You must use four M6x8 screws to assemble this monitor and the wall mount bracket.

- 42-inch : You must use six M8x8 screws to assemble this monitor and the wall mount bracket.

※ WARNING!

If user use longer than M6x8(27/32inch), M8x8(42inch) it may cause the damage on the unit.

Please follow instructed bolt size & length.

16 ………………………………………………………………………. INSTRUCTION MANUAL

▶ PIN ASSIGNMENTS

Pin 1 RED VIDEO 9

2 GREEN VIDEO 10 SIGNAL CABLE DETECT

3 BLUE VIDEO 11 GROUND

4 GROUND 12 SDA(for DDC)

5 GROUND 13 H-SYNC.(or H+V SYNC.)

6 RED GROUND 14 V-SYNC.

7 GREEN GROUND 15 SCL(for DDC)

8 BLUE GROUND

D-SUB

▶ ACCESSORIES

1. Power cord

2. User’s manual

3.

HDMI Cable

4.

Trigger cable

5.

Stereo cable

6.

Remote controller

7.Batteries

8. Wall mount (Option)

INSTRUCTION MANUAL ………………………………………………………………………. 17

POWER CONSUMPTION

MODE

POWER CONSUMPTION

24” 27” 32” 42”

ON

POWER OFF

<43W <48W

< 1W

< 55W < 67W

LED INDICATOR

The power management feature of the monitor is comprised of four stages:

On(Green) and Unsupported mode(Green).

MODE LED COLOR MONITOR OPERATION

ON

UNSUPPORTES

MODE

POWER OFF

GREEN Normal Operation

Normal operation but the on screen

GREEN

Display will show error massage

RED Not Operation

18 ………………………………………………………………………. INSTRUCTION MANUAL

LCD-Type

RESOLUTION (H x V)

FREQUENCY

INPUT SIGNAL

Type

Pixel pitch(mm)

BRIGHTNESS

CONTRAST RATIO

VIEWING ANGLE

RESPONSE TIME

24" 27"

24˝ Diagonal AM-TFT

(Active-Matrix)

0.27675(H) x 0.27675(V) 0.3112(H) x 0.3112(V)

250cd/m² (Typical) 300cd/m² (Typical)

5000:1(Typical) 3000:1(Typical)

178°/178°(H/V)

12msec (Gray to Gray)

1920X1080 @60Hz

HORIZONTAL: 31~80KHz,

VERTICAL: 56~75Hz

VIDEO(2ch input 1.0Vp-p, 75Ω terminated, loop-through out)

S-VIDEO(1ch input (Y/C), loop-through out)

COMPONENT (Y,Pb,Pr, Sound L/R)

DVI (Digital Video Interface)

HDMI1, HDMI2 (High Definition Multimedia Interface)

PC RGB

27˝ Diagonal AM-TFT

(Active-Matrix)

AV(composite) Sound in/Out

PC Stereo Sound

Audio Out

DC12V OUT (CAMERA USE)

ACTIVE DISPLAY

AREA (W x H)

PACKING DIMENSIONS

(W x H x D)

Net

WEIGHT

Gross

ELECTRICAL RATINGS

531.36 X 298.89 mm 597.6 X 336.15 mm

715mm X 575mm X 205mm

(26.77” X 20.67” X 6.77”)

6.04 kg (13.32 lbs) 10.5 kg (23.15 lbs)

8.54 kg (18.83 lbs) 14.6 kg (32.19 lbs)

100-240V~, 50/60Hz (Auto Switching)

720mm X 563mm X 180mm

(28.35” X 22.17” X 7.09”)

▶▶ NOTE : Technical specifications are subject to change without notice.

INSTRUCTION MANUAL ………………………………………………………………………. 19

LCD-Type

Type

Pixel pitch(mm)

BRIGHTNESS

CONTRAST RATIO

VIEWING ANGLE
RESPONSE TIME

RESOLUTION (H x V)

FREQUENCY

INPUT SIGNAL

32" 42"

32˝ Diagonal AM-TFT

(Active-Matrix)

0.36375(H) x 0.36375(V) 0.4845(H) x 0.4845(V)

350cd/m² (Typical)

3000:1(Typical)

178°/178°(H/V)

6.5msec (Gray to Gray)

1920X1080 @60Hz

HORIZONTAL: 31~80KHz,

VERTICAL: 56~75Hz

VIDEO(2ch input 1.0Vp-p, 75Ω terminated, loop-through out)

S-VIDEO(1ch input (Y/C), loop-through out)

COMPONENT (Y,Pb,Pr, Sound L/R)

DVI (Digital Video Interface)

HDMI1, HDMI2 (High Definition Multimedia Interface)

PC RGB

42˝ Diagonal AM-TFT

(Active-Matrix)

AV(composite) Sound in/Out

PC Stereo Sound

Audio Out

DC12V OUT (CAMERA USE)

ACTIVE DISPLAY

AREA (W x H)

PACKING DIMENSIONS

(W x H x D)

Net

WEIGHT

Gross

ELECTRICAL RATINGS

698.4 X 392.85 mm 930.24 X 523.26 mm

790mm x 580mm x 220mm

(31.10” x 22.83” x 8.66”)

13 kg (28.66 Ibs) 19.4 kg (42.77 Ibs)

17.3 kg (38.14 lbs) 27 kg (59.52 lbs)

100-240V~, 50/60Hz (Auto Switching)

1294 x 900 x 320 mm

(50.16” x 34.65” x 11.81”)

▶▶ NOTE : Technical specifications are subject to change without notice.

20 ………………………………………………………………………. INSTRUCTION MANUAL

WEEE Symbols

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other
European countries with separate collection systems)

This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and
recycle it responsibly to promote the sustainable
reuse of material resources. Household users should
contact either the retailer where they purchased this
product, or their local government office, for details of
where and how they can take this item for
environmentally safe recycling. Business users
should contact their supplier and check the terms
and conditions of the purchase contract. This product
should not be mixed with other commercial wastes
for disposal.

INSTRUCTION MANUAL ………………………………………………………………………. 21

MEMO

MEMO

MEMO

P/N : L39ME0359 Rev.0