ViewZ VZ-101FM-E Users Guide

User Guide

0

YP-01140726

IMPORTANT SAFETY INSTRUCTIONS:

 Please read User Guide before using this product.
 Please keep User Guide for future reference.
 Please read the cautions to prevent possible danger and loss of

property.

FEATURES:

 High resolution: 1280×800;
 Wide voltage: DC 7-24V;
 High contrast: 800:1;
 170°/ 170°(H/V) wide viewing angles, to provide better viewing effect;
 Lux Auto Backlight (Optional).

CAUTIONS:

1. Please do not place the display screen towards the ground.

2. Please avoid heavy impact or drop onto the ground.

3. Please do NOT use chemical solutions to clean this product. Please
wipe with a clean soft cloth to maintain the brightness of the surface.

4. Please do not block any vent hole.

5. Please follow the instructions and trouble-shootings to adjust the
product. Other improper adjustment may result in damage. Any further
adjustment must be performed or conducted by a qualified technician.

6. Please unplug the power and remove the battery if long-term no-use,

or thunder weather.

Contents

1. PRODUCT DESCRIPTION ...................................................................................................... 2

2. REMOTE CONTROL ................................................................................................................ 5

3. DV BATTERY MOUNT PLATE ............................................................................................... 5

4. WIRING INSTRUCTIONS........................................................................................................ 7

5. MENU SETTING ........................................................................................................................ 8

6. ACCESSORIES ......................................................................................................................... 12

7. PARAMETERS ......................................................................................................................... 13

8. TROUBLE SHOOTING .......................................................................................................... 13

1

1. PRODUCT DESCRIPTION

1. Auto backlight receiving window (Optional).

2. Infrared signal receiver (work with remote control).

3. Power indicator light (red while standby; green while working).

4. Dial: Turn the dial to adjust volume;

Turn the dial to select menu option and adjust the option
value;

Press the dial to confirm.

5. M/EXIT: To activate or exit OSD menu.

6. FN: Image auto capture function under VGA mode;

Underscan function under HDMI mode.

7. INPUT: circularly switch among of AV1, AV2, PC, HDMI, DVI or

SDI.

8. POWER: ON/OFF.

9. Mounting socket.

2

Without SDI:

1． VGA interface.
2． DC 12V power input.

3． HDMI / DVI input interface.
4． I / O control interface.
5． A / V input interface.

6． Earphone jack
7． Speaker
8． VESA Mounting interface.
9． Slide to left to connect power cable
(Connecting with the battery plate).

3

With SDI:

1. VGA interface.

2. Battery power on/off switch: “O” is power off; “|” is power on.

3. DC 12V power input.

4. DC / TALLY connector.

5. HDMI / DVI input interfaces.

6. HDMI output interface.

7. Video output interface.

8. A / V input interface.

9. Earphone jack.

10. SDI output interface.

11. SDI input interface.

12. Speaker.

13. Slide to left to connect power cable (connecting with the battery
plate).

14. VESA Mounting interface

4

2. REMOTE CONTROL

1. MUTE

2. Circularly switch among of AV1, AV2, PC, HDMI, DVI or SDI.

3. : Left move，Volume down or to adjust the value of setting
function.

4. MENU: To activate OSD (on-screen display) menu.

5. POWER: ON/OFF.

6. OK: Enter.

7. : Right move, Volume up or to adjust the value of setting function.

3. DV BATTERY MOUNT PLATE

Standard mounts process

Following three types of battery plates are suitable for this device, model

F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).

5

Plate Bracket

V-mount Battery Plate

MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6

DV Battery Mount Plate:

DV Battery Mount Plate Specification:

Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.

Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
116/DCR-DVD/PS105K/300K/10P/1E series.

Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.

Model LP-E6 for battery of Canon DSLR:

5D Mark II/5D Mark III/EOS7D/EOS60D;

V-mount battery plate (optional): Please refer to GP-L130AB type

battery specifications.

6

Anton Bauer mount battery plate (optional): Please refer to

Plate Bracket

Anton Bauer Mount Battery Plate

GP-L130B type battery specifications.

4. WIRING INSTRUCTIONS

I/O control line

1. Blue: Video trigger 1

2. Back: GND

3. Green: Video trigger 2

Composite cable

White: audio
Yellow: video 1
Yellow: video 2

A/V signal input

HDMI to HDMI cable

1. HDMI signal input end

2. HDMI signal input connect device with HDMI signal

3. USB port connect computer for touch function (optional)

7

HDMI to DVI cable (optional):

1. HDMI signal input end.

2. DVI signal input connect with device with DVI signal.

3. USB connect with the USB port of computer for touch function
(optional).

5. MENU SETTING

Before setting the functions, please make sure the device is
connected correctly.

5-1. Shortcut keys:

5-1-1. the image menu

When power on, Sliding the slider on the device, brightness will

appear at the bottom of the screen, then press the slider to select
brightness, sharpness, contrast, saturation, volume, tint. User can

adjust the parameters of the selected item with Slide up and down to
meet their needs.

5-1-2. FN user-definable function button:

Long press FN key for 3-5 seconds to pop-up shortcut
menu directly. As shown in Figure (default menu button
in white font).

Slide up and down to select the desired option.

Finally, press the slider to confirm the selected item

as default.

Functions of FN button can also be customized:
Center Marker, Safety Marker, Check Field, Color Bar,
Aspect Ratio, Zoom, Pixel-to-Pixel, Freeze Input,
Underscan, H/V delay.

FN：User-definable function button.

Default function: Aspect Ratio

8

5-2. MENU Operation

ITEMS

OPTIONS

Brightness

0 – 100

Contrast

0 – 100

Saturation

0 – 100

Tint

0 – 100

Sharpness

0 – 100

Volume

0 – 100

Color Temp

6500ºK/7300 ºK/9300 ºK/User

R Gain

0 - 255

Note: Available only

under “User” mode

to choose the color
value you need.

G Gain

0 - 255

B Gain

0 - 255

R Offset

0 - 999

G Offset

0 - 999

B Offset

0 - 999

When power on, press “M/EXIT” on the device. The menu of function

setting will display on the screen.

With slide up and down the slider to choose menu; then rotate the

slider up to confirm; after that, press M/EXIT to return to main menu.

5-2-1. Picture

9

5-2-2. Marker

ITEMS

OPTIONS

Center Marker

ON, OFF

Safety Marker

OFF, 95%, 93%, 90%, 88%, 85%, 80%

ITEMS

OPTIONS

Aspect Ratio

Full Screen, 16:9, 4:3, 1.85:1, 2.35:1

H/V Delay

OFF, H&V, V, H

Check Field

OFF, Mono, Red, Green, Blue

Pixel-to-Pixel

OFF, ON

Underscan

OFF, ON

Zoom

OFF, ×2, ×4, ×6, ×8

Freeze Input

OFF, ON

5-2-3. Display

10

5-2-4. PC Adjust

ITEMS

OPTIONS

Auto

ON

H-Position

0 – 100

V-Position

0 – 100

Phase

0 – 63

Clock

0 – 100

ITEMS

OPTIONS

Language

English, Chinese

Reset

OFF, ON

Backlight

0 – 100

Auto Light

OFF, ON

Image Flip

H&V, V, H

Upgrade

For program upgrades

5-2-5. System

11

6. ACCESSORIES

Standard Accessories:

Optional Accessories:

12

7. PARAMETERS

Without SDI

With SDI

Panel

10.1” LED Backlight

10.1” LED Backlight

Physical Resolution

1280×800

1280×800

Brightness

350cd/㎡

350cd/㎡

Contrast

800: 1

800: 1

Viewing Angle

170°/ 170°(H/V)

170°/ 170°(H/V)

Input Voltage

DC 7-24V

DC 7-24V

Input Signal

AV, HDMI, PC or DVI

AV, HMDI, PC, SDI or DVI

Power Consumption

≤ 10W

≤ 12W

Operating Temperature

0℃~50℃

0℃~50℃

Storage Temperature

-20℃~60℃

-20℃~60℃

Dimension (LWD)

250×170×32.3mm

250×170×32.3mm

Weight

560g

660g

8. TROUBLE SHOOTING

1. Only black-and-white display:

Check whether the color saturation is properly setup or not.

2. Power on but no pictures:

Check whether the cables of AV, HDMI, PC and SDI are correctly

connected or not. Please use the standard power adapter coming with the
product package. Improper power input may cause damage.

3. Wrong or abnormal colors:

Check whether the cables are correctly and properly connected or not.

Broken or loose pins of the cables may cause a bad connection.

4. When on the picture shows size error:

Press “MENU → DISPLAY → Underscan” to zoom in/out pictures

automatically when receiving HDMI signals

5. Other problems:

Please press “ ” button and choose “M/EXIT→SYSTEM→ Reset

→ON”

6. According to the ISP, the machine cannot function properly:

ISP for program upgrades, non-professionals do not use. Please reboot

your device if press accidentally!

· It is normal to see some bright lines appear on the screen when turn off the
device.

Note: due to constant effort to improve products and product
features, specifications may change without notice.

13

14