ViewZ VZ-097RCR-D User Manual

9.7-INCH RACK VALUE
LED CCTV MONITOR

USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

SAFETY INSTRUCTION ………………………………………………………….……

2 ~ 3

CAUTIONS ……………………………………………………………..........................

4

FCC RF INTERFERENCE STATEMENT …………………………….......................

5

CONNECTING WITH EXTERNAL EQUIPMENT ……………………………………

6

CONTROLS AND FUNCTIONS ………………………………………………………..

7 ~ 14

MOUNTING GUIDE ……………………………………………………………………..

15

D-SUB CONNECTOR PIN ASSIGNMENTS …………………………………………

16

POWER MANAGEMENT ………………………………………………………………

17

SPECIFICATIONS ………………………………………………………………………

18

TROUBLE SHOOTING GUIDE ………………………………………………….........

19

INSTRUCTION MANUAL ………………………………………………………………………. 1

This Monitor was
Manufactured by ISO 9001
Certified Factory

Important Safety Instruction

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as radiators, heat registers,stoves, or other
apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

Apolarized plug has two blades with one wider than the other.
Agrounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement
of the bsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.

11. Only use attachment/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus the apparatus has been exposed to
rain or moisture does not operate normally or has been dropped.

2 …………………………………………….……………………………INSTRUCTION MANUAL

- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed no the apparatus.

- Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation.

“WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.”

“The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.”

This symbol is intended to alert the user to the presence of uninsulated :

dangerous voltage with in the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating
and maintenance(servicing) instructions in the literature accompanying the
appliance.

INSTRUCTION MANUAL ………………………………………………………………………. 3

CAUTION

The power supply cord is used as the main disconnect device, ensure that the socket-outlet is
located/installed near the equipment and is easily accessible.

ATTENTIONN

Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être
située ou installée à proximité du matériel et être facile d`accès

▶ NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

▶ DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent shock or fire hazard, do not expose the unit to rain or moisture.
This unit is designed to be used in the office or home. Do not subject the unit to vibrations,
dust of corrosive gases.

▶ KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising.
Do not cover the unit or place anything on the top of unit.

▶ AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

▶ TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground and where sunlight or other light sources will
shine directly on the monitor.

▶ BE CAREFUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.

4 …………………………………………….……………………………INSTRUCTION MANUAL

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio, TV technician for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by
the grantee or manufacturer could void the users authority to operate such equipment.

▶ DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulation of Canadian Department of
communications.

INSTRUCTION MANUAL ………………………………………………………………………. 5

BACK

1. TRIGGER IN x(2)

2. AUDIO IN x(2)

3. VIDEO1(AV) IN (BNC Type) x(2)

4. VIDEO1(AV) OUT (BNC Type) x(2)

5. VIDEO2(AV) IN (RCA Type) x(2)

6. VIDEO2(AV) OUT (RCA Type) x(2)

7. VGA x(2)

8. DC 12V x(2)

6 …………………………………………….……………………………INSTRUCTION MANUAL

1 2 3

4 5 6 7 8

FRONT

1. INPUT

Selects VGA or AV inputs.
Selects an option in the OSD.

2. MENU

Activates or exits the OSD.
Moves previous menu or status in the OSD.

3, 4. ▲ / ▼

Moves another option in the OSD.
The ▼ button is auto adjustment function in the VGA input.

5, 6. ◀ / ▶

Adjusts the volume and menu settings.
The ◀ button is mute function.

7. / I (POWER ON/OFF)

Turns the power on or off. There will be a few seconds delay before the display appears.

8. POWER LED

Turned on with VGA or AV signals: Green color.
Turned on with no signal: 1) AV mode: Green color

2) VGA(PC) mode: Blinking green color.
Turned off: LED off.

INSTRUCTION MANUAL ………………………………………………………………………. 7

OSD Menu Description

All picture, sound settings and setup for the monitor can be adjusted in the OSD menu.
(On Screen Display)
To adjust the OSD screen:

1. Press the MENU button to enter the OSD menu.

2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted.

3. Press the ▶ button to enter the submenu for adjusting items.

4. Change the value you wish to adjust by using the ▲/▼ buttons.

5. Press the ◀ button to exit the submenu for adjusting items.

6. Press the MENU button to exit the OSD menu.

A. PICTURE

Option

Function

Value

CONTRAST

Adjusts intensity of the image.

0 ~ 100

BRIGHTNESS

Adjusts brightness of the screen.

0 ~ 100

HUE

Adjust the hue of picture.

0 ~ 100

SATURATION

Adjust the saturation of picture.

0 ~ 100

SHARPNESS

Adjusts sharpness of the picture.

0 ~ 100

COLOR TEMP

Select the color temp of picture

Normal, Warm, Cool

PICTURE MODE

Select the picture mode of picture.

Standard, Cinema, Vivid

※ Unavailable in RGB-PC Mode.

8 …………………………………………….……………………………INSTRUCTION MANUAL

B. SOUND

Option

Function

Value

VOLUME

Adjust the level of audio volume.

0 ~ 100

MUTE

Mutes speaker sound.

Off or On

INSTRUCTION MANUAL ………………………………………………………………………. 9

C. PC (Only PC Mode)

Option

Function

Value

CONTRAST

Adjusts intensity of the image.

0 ~ 100

BRIGHTNESS

Adjusts brightness of the screen.

0 ~ 100

PC ADJUST

Adjusts the PC Mode.

See the table on Next page

COLOR MODE

Adjusts the vertically picture position.

See the table on Next page

PICTURE MODE

Adjusts the vertical noise of screen image.

Standard, Cinema, Vivid

RESOLUTION

Adjust the resolution that an user wants.

※ Unavailable in AV Mode (Only PC Mode).

10 …………………………………………….……………………………INSTRUCTION MANUAL

PC ADJUST

Option

Function

Value

AUTO ADJUST

Auto geometry adjustment.

H POSITION

Adjusts the horizontally picture position.

0 ~ 100

V POSITION

Adjusts the vertically picture position.

0 ~ 100

CLOCK

Adjusts the vertical noise of screen image.

0 ~ 100

PHASE

Adjusts the number of horizontal picture elements.

0 ~ 100

SEL AUTO

Selects the type of auto adjustment.

MANUAL1), AUTO2)

1) Manual: Operating the auto adjustment of the screen only the first time.

2) Auto: Operating the auto adjustment every time the resolution is changed

COLOR MODE

Cool

Gives the white color a bluish tint.

Normal

Gives the white color a neutral tint.

Warm

Gives the white color a reddish tint.

User

1)

To manually adjust the color tones (Red, Green, and Blue).

1) Unavailable in AV Mode (Only PC Mode).

INSTRUCTION MANUAL ………………………………………………………………………. 11

D.SETUP

Option

Function

Value

Language

Sets the language of the OSD menu.

English, German, French,
Italian, Spanish, Nederland and Korea

OSD

Sets the OSD.

See the table on Next page

Key Lock

1)

Locks all buttons of the monitor.

Off or On

ARC

Sets the screen ratio.

AV Mode: 16:9, 1:1, 4:3, 14:9, Zoom1,

Zoom2, Under

TRIGGER

See the table on Next page.

RECALL

Resets the monitor settings to the factory default.

1) How to unlock

- On the front key: Press the MENU and ▲button at the same time over 3 seconds.

12 …………………………………………….……………………………INSTRUCTION MANUAL

OSD

Option

Function

Value

H POSITION

Move OSD horizontally on screen right or left.

0 ~ 100

V POSITION

Move OSD vertically on screen up or down.

0 ~ 100

OSD TIMER

Adjust OSD displaying time.

5 ~ 60

TRANSPARENT

Adjust OSD transparent.

Off or On

TRIGGER

Option

Function

Value

TRIGGER ENABLE

Activates the trigger feature.

Off or On

TRIGGER INPUT

Selects the input source for the Trigger.

AV1, AV2, RGB-PC

BUZZER

Not Operation

TRIGGER TIME

Selects the amount of time, in seconds,
that the monitor displays the trigger Input
image.

3 ~ 100

TRIGGER OPTION

Selects the type of physical trigger input.

See the table on Next page.

INSTRUCTION MANUAL ………………………………………………………………………. 13

TRIGGER OPTION

N/C(Normally Closed):
The Trigger function is activated when
the trigger cable is opened.

N/O(Normally Opened):
The Trigger function is activated when
the trigger cable is closed.

High:
The Trigger function is activated when
the trigger signal is DC 2~5[V].

Low:
The Trigger function is activated when
the trigger signal is DC 0~0.6[V].
Note: In this case, trigger port has high
status electrically, so the trigger cable
has to have ground(or earth) status to
be activated.

14 …………………………………………….……………………………INSTRUCTION MANUAL

Rack mount

INSTRUCTION MANUAL ………………………………………………………………………. 15

465mm

Rack Mounting Holes

187.5mm

▶ PIN ASSIGNMENTS

Pin 1

RED VIDEO

9 2

GREEN VIDEO

10

SIGNAL CABLE DETECT

3

BLUE VIDEO

11

GROUND

4

GROUND

12

SDA(for DDC)

5

GROUND

13

H-SYNC.(or H+V SYNC.)

6

RED GROUND

14

V-SYNC.

7

GREEN GROUND

15

CL(for DDC)

8

BLUE GROUND

D-SUB

▶ ACCESSORY

1. Power adaptor x(2)

2. User’s manual

3. Cable (PC or HDMI) x(2)

4. Trigger cable (Option) x(2)

5. Stereo cable (Option) x(2)

16 …………………………………………….……………………………INSTRUCTION MANUAL

Power Consumption

Mode

Power Consumption

Turned On

< 16.4W

Turned Off

< 0.5W

LED Indicator

The power management feature of the monitor is comprised of three stages:
Turned on(Green), No signal(AV mode: Green / VGA mode: Blinking green ) and
Turned off(LED off).

Mode

LED

Monitor Operation

Turned On

Green

Normal Operation

No

Signal

AV mode

Green

Not Operation

VGA(PC) mode

Blinking green

Turned Off

LED off

Not Operation

INSTRUCTION MANUAL ………………………………………………………………………. 17

9.7’’ Dual

LED-Type

9.7’’ Diagonal AM-TFT (Active-Matrix)

Pixel pitch(mm) : 0.192(H) x 0.192(V)

Brightness: 350cd/m² (Typical)

Contrast Ratio: 600:1 (Typical)

Response Time: 35msec (Typical)

RESOLUTION

(H x V)

1024x768 @60Hz

FREQUENCY

HORIZONTAL : 31~48KHz,
VERTICAL : 56~60Hz

INPUT SIGNAL

VIDEO (BNC Type) x(2)
(1ch input 1.0Vp-p, 75Ω terminated, 1ch loop-through out)

VIDEO (RCA Type) x(2)
(1ch input 1.0Vp-p, 75Ω terminated, 1ch loop-through out)

VGA (RGB-PC) x(2)

AUDIO In x(2)

ACTIVE DISPLAY

AREA (H x V)

196.608mm x 147.456mm x(2)

PACKING

DIMENSIONS

(W x D x H)

575mm x 168mm x 285mm
(22.64’’ x 6.61’’ x 11.22’’)

WEIGHT

Net: 3 kg (6.61 lbs)

Gross: 4.8 kg (10.58 lbs)

ELECTRICAL

RATINGS

12V 1.36A (100-240V~, 50/60Hz)

▶▶ NOTE : Technical specifications are subject to change without notice.

18 …………………………………………….……………………………INSTRUCTION MANUAL

WEEE Symbols

INSTRUCTION MANUAL ………………………………………………………………………. 19

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other
European countries with separate collection systems)

This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and
recycle it responsibly to promote the sustainable
reuse of material resources. Household users should
contact either the retailer where they purchased this
product, or their local government office, for details of
where and how they can take this item for
environmentally safe recycling. Business users
should contact their supplier and check the terms
and conditions of the purchase contract. This product
should not be mixed with other commercial wastes
for disposal.

MEMO

L39ME0308 Rev.2