ViewZ VZ-070-TBBSV, VZ-070-TSBSV Operation Manual

VZ-070-TBBSV

VZ-070-TSBSV

Monitor Operation Manual V1.3

3G

Operating Instructions

Broadcasting Monitor User guide

1

15

3

5
6
7
816

Connecting to BNC Signal Device

9

SDI input signal Format

9

17

Connecting to Component Signal Device

10

17

Component input signal Format

18

10

11

Color Only
NTSC Setup
Max Bright

12

19
20

14

Input Output
Timecode

Contents

Setting

Contents

OSD

Caution

Load System Default

Product features

Bklight Dimming

Monitor View

Misc

Source Alias
UMD
System Info
H Flip
Test Pattern

Initial Setup
Basic Information Advanced

Brightness
Contrast

Video

Color Temp

Composite input signal Format

HDMI input signal Format
HDMI output signal Format

Function Key
Marker
Handheld

Connecting to Composite Signal Device

H/V Delay
Still

A/V Scope

Scope Position
Waveform Enable

Aspect
Anamorphic
Zoom Mode

Aspect Menu

Scan

Vector Enable
Audio Level Meter

Peaking Color

Peaking Sensitivity

Peaking

DSLR Scale

Specification

Accessory

Limit Blink

False Color Blink

Limit Emphasis

False Color Palette

False Color L/L

False Color U/L

False Color

Peaking Blinking

Waveform Source

SDI output signal Format

Connecting to HDMI Signal Device

Color

Getting Started

Connections

MENU Features

Other Information

2

■

■

■

WARNING – TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR
MOISTURE.

■

"IMPORTANT SAFETY INSTRUCTIONS"

□

Read these instructions

□

Keep these instructions

□

Heed all warnings

□

Follow all instructions

□

Do not use this apparatus near water

□

Clean only with a dry cloth

□

Do not block any of the ventilation openings. Install in accordance with he manufacturer's instructions

□

□

□

□

Only use the attachments/accessories specified by the manufacturer.

□

□ Unplug this apparatus during lightning storms or when unused for long periods of time

□

□

□

Shall be connected to a MAINS socket outlet with a protective earthing Connection

□ The disconnect device shall remain readily operable

□ The socket-outlet shall be installed near the equipment and shall be easily accessible

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

Do not defeat the safety purpose o f the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus

Caution

It is highly recommended to read and understand the cautions listed below thoroughly before you start using the
product. And if you are unclear with any parts of the cautions or have questions, please contact us.

Caution

Caution

3

■

■

Manual contents are subject to change without notice

Explanation of Safety Related Symbols

Caution

Caution (cont'd)

4

■

Integrated Converte

r

Multi-Format Signal

ViewZ monitors are compatible with various sources includi ng

- HDMI (compatible with DVI)

- SDI signals: 3G(425A/B ), HD, SD

- CVBS(composite) and YPbPr(component)

3G-SDI: 3Gb/sec 4:4:4 HD

SDI-HDMI Loop Through

12Bit Internal Processing

2K Input Capabilit

y

Peaking / Focus Assist

DSLR Scaling

False Colors Filte

r

Under Monitor Displa

y

Menu Jog Congrol

Jog dial on the front of the m oni tor enables users to control all features

W

aveform Monito

r

Vector Scope Monito

r

Pixel to Pixel Mapping

De-Embedded Audio Level Mete

r

Aspect Format Markers

4:3, 14:9, 15:9, 16:9 etc . area, line, safety, center markers display

Gamma Encoding Select

Range from 1.0 to 3.0 users selectable. Factory default setting is 2.8

Time Code

Time code reader displays embedded LTC or VITC formats

H/V Dela

y

RJ-45 Remote Control

Product Features

Product Features

Plug in your RJ-45 connector to the back of the monitor and communicate with other ViewZ
monitors (RS-485 control / Tally Light Control)

Peaking filter shows if the image is out of focus in difficult wide full range DSLR shots by
highlighting areas that are out of f ocus with a cross stripe patt ern

Actively scales live video images to reduce the black areas of the screen to allow for a ful screen 16:9
image

Color filtering allows users to display different areas of the images as different colors to set portions of
the scene as over or under exposed

UMD function displays ancilliary data at the bottom of the screen

Onscreen display of video levels with respect to time, used to calibrate multiple camera setups and
vertical blanking level and color burst

Allows for color temperature and gamma encoding changes to be implemented quickly. Active
Video Looping supports full 1080p/60 f rames on the HDMI output

Supports full SMPTE 425 signal conversion transparency from SDI to HDMI with test and
measurement overlays

SMPTE 425 compliant HD display that supports frame rates of 50.60 in 1080p, 1080i, and
720p

Integrated active SDI-HDMI and HDMI-SDI converter allows the transparent conversion of HD to
HDMI signal or conversion of HDMI back to HD format

View the blanking area and syncronize signals by displaying the horizontal and vertical intervals in the center of
the screen

De-embedded audio selected out. Auto sensing to display three range meter of
up to 16 ch

1:1 pixel mode displays the original image resolution without scaling to match a certain resolution
or an aspect ratio

On-screen display of chrominance information in Cb and Cr channels. Display can be opaque or
solid against the visual di splay

2k content can be displayed on ViewZ monitors without the loss of HD signal by converting and
downscaling the content

Product Features

5

* Does not support P.O.E.

■

Monitor View

Exterior Information

VZ-070XXXX

X

monitor

Rear

221.5 x 126 (mm)

Stand

221.5 x 136 (mm)

Front

1. Mount

2. Tally display

3. Speaker

5. Function key F1

7. Function key F2

9. Function key F3

11. Function key F4

13. Function key F5

15. Function key F6

4. Source select

6. scanchoice

8. Main menu open

10. EXIT

12. UP

14. DOWN

15. Menu control Jog

14. Power LED

13. V mount

14. RS-485 IN

15. RS-485 OUT

16. DC 12V Power in

17. XLR Power in

18. On/Off switch

2. SDI signal in

4. SDI signal out

6. Composite out

8. Audio in R

10. PC Audio out

12. HDMI out

1. Component [ Pr ], CVBS 3 in

7. Audio in L

9. PC Audio in

11. HDMI in

3. Component [ Pb ], CVBS 2 in

5. Component [ Y ], CVBS 1 in

Monitor View

6

■

1

- Turn the main jog to make your choice, and click the jog to select

2

- Press the main jog on the front of the monitor for 2 seconds to enter or exit the menu

- Turn the jog to move around the menu

- Click the jog to make your selection

3

Factory default setting for programmable keys on the front of the monitor

▶▶

First Steps

Selecting Input

Menu Control

When the monitor is powered on and connected to your source,

F3 Max Bright
F5 HDMI Output

F1 Blue/Mono F2

Function key

Initial Setup

- To select your source, please press SOURCE button

- Factory default is HDMI. Please skip this step if you are connected to HDMI
source

- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press
the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in
menu tree

- Users can program 6 function buttons on the front by

MENU Function Key Function Key #

- If you click the jog without entering the main menu, brightness, contrast, color, and volume control will be
available. For an example, click the jog 2 times to control contrst and 4 times to change volume

Aspect

SDI Output

H/V Delay

- All featuress in the monitor can be programmed in one of these six keys

F6

F4

VZ-070XXXX

X

Initial Setup

7