ViewSonic VT2756-L, VT2406-L, VT3200-L, VT4200-L User Manual
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specic languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”
VT2756-L/VT2406-L
Professional LCD TV display
User Guide
Model No. VS15628/VS15627
Contents
Compliance Information .......................................................................................... i
Declaration of RoHS2 Compliance ......................................................................... ii
Copyright Information .............................................................................................iii
Product Registration ...............................................................................................iii
Important Safety Instructions ................................................................................. iv
Getting Started ................................................................... 1
Package Contents .................................................................................................... 1
Installing the LCD TV ............................................................................................... 2
Installing the Stand .............................................................................................2
Disconnecting the Stand ....................................................................................2
Mounting ViewSonic LCD TV to the wall ............................................................3
Wall Mount Kit Specications (VESA) ................................................................4
Front View of the Product .......................................................................................5
Rear View of the Product ........................................................................................6
Connecting the LCD TV ........................................................................................... 7
Cable System or VHF/UHF Antenna System ..................................................... 7
Cable System and VHF/UHF Antenna System ..................................................7
HD Cable Box/HD Satellite Box .........................................................................7
Personal Computer ............................................................................................10
Using the TV Features....................................................... 11
Remote Control and TV Controls ...........................................................................11
Inserting Remote Control Batteries .................................................................... 11
Remote Control and TV Controls .......................................................................11
Operation .................................................................................................................. 14
Other Information .............................................................. 31
Troubleshooting .......................................................................................................31
Specications ...........................................................................................................33
RS232 Protocol ........................................................................................................34
Customer Support ...................................................................................................43
Limited Warranty ......................................................................................................44
Mexico Limited Warranty ........................................................................................45
i
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
ENERGY STAR Information:
• ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection
Agency (EPA).
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and protect the environment through energy
efcient products and practices.
The power consumption will be changed, if the TV set up to be another mode except for default asshipped television conguration and settings.
The power consumption may exceed energy consumption beyond the limits required for ENERGY
STAR qualication when the optional function used or the operation mode changed in use.
Dolby Trademark Information:
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Compliance Information
ii
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Substance
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr
6+
) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE)
0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex III of the RoHS2
Directives as noted below:
Examples of exempted components are:
1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps (CCFL and
EEFL) for special purposes not exceeding (per lamp):
(1) Short length (≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight
or more lead).
7. Electrical and electronic components containing lead in a glass or ceramic other than dielectric
ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
iii
Copyright Information
Copyright © ViewSonic® Corporation, 2013. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com.
For Your Records
Product Name: VT2756-L/VT2406-L
ViewSonic LCD TV
Model Number: VS15628/VS15627
Document Number: VT2756-L/VT2406-L_UG_ENG Rev. 1B 10-21-13
Serial Number: _________________________________
Purchase Date: _________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you for
being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
iv
Important Safety Instructions
Dangerous Voltage: The lightning ash with
arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence
of dangerous voltage within the inside of the
product that may be sufcient level to constitute
a risk of electric shock to persons.
Instruction: The exclamation point within
an equilateral triangle is intended to alert the
user to the presence of important operating
and servicing instructions in the literature
accompanying the appliance.
1. Read these instructions completely before using the
equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the
equipment in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices (including ampliers) that produce
heat.
9. Do not attempt to circumvent the safety
provisions of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade and the third prong are
provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of
the outlet.
10. Prevent the power cord from being tread upon or
pinched, particularly at the plug, convenience
receptacles, and the point where they exit from the
device. Be sure that the power outlet is located near the
equipment so that it is easily accessible.
11. Only use attachments/ accessories specied
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specied by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus when it will be unused for a long
period of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, or the unit does not operate normally, or
has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC power cord
from being damaged. If the AC power cord is damaged, it
may result in a re or an electric shock. Stop using it and ask
your dealer or ViewSonic service center to exchange it.
• Do not place the TV where the power cord is subject to
wear or abuse.
• Do not pinch, bend, or twist the cord excessively.
• The core lines may be bared and cut, causing a shortcircuit, and resulting in a re or an electric shock.
• Do not convert or damage the power
cord.
• Avoid power cord being rolled over or
rested upon.
• When the power cord is plugged in, do
not move the TV.
• Keep the power cord away from heat sources.
• When you disconnect the AC power cord, disconnect it
from the wall outlet rst.
• When disconnecting the power cord, grasp the plug instead
of pulling the power cord.
• Use only an original ViewSonic AC power cord, not other
brands.
• Do not use the supplied AC power cord on any other
equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose,
do not use it. Doing so may cause arcing and
result in a re. Contact your electrician to
change the outlet.
Wiring
For your safety, be sure to unplug the AC
power cord when connecting cables.
Take care not to trip on the cables. It may cause damage to
the TV set.
Electric shock
Do not touch the AC power cord or the TV with
a wet hand. If you plug/unplug the AC power
cord from the TV with a wet hand, it may
cause electric shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet
and disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time,
the TV set should be disconnected from the AC power outlet
to prevent power line surges. The TV set is not disconnected
from the AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from the AC
power outlet.
Overloading
This TV set is designed to operate on a 120V
AC supply only.
If there are too many appliances connected to
the same AC power outlet, it could result in a
re or an electric shock.
v
Optional equipment
If optional equipment is to be installed, leave some space
between optional equipment and the TV set. Picture
distortion and/or noisy sound may occur if the TV set is
positioned in close proximity to any equipment emitting
electromagnetic radiation.
Small accessories
Keep small accessories in a safe place where children are
unable to reach.
Magnetic inuence
This TV contains a strong magnet in the speaker unit that
generates a magnetic eld. Keep any items susceptible to
magnetic elds away from the speaker.
Sound
If you hear snapping or popping sound comes
from the TV continuously or frequently while
the TV is operating, unplug the TV and consult
your dealer or service technician. It is normal
for some TVs to make occasional snapping or
popping sounds, particularly when being turned
on or off.
Use in outdoor
This TV is not designed for outdoors
installation. Do not expose the TV to rain,
as it may result in a re or an electric
shock. Also, do not expose the TV to direct
sunlight, as it may heat up and become
damaged.
Vehicle, ships and other vessels
Do not install this TV in a vehicle.
Car accidents may cause the TV to fall down
and cause injury.
Do not install this TV in a ship or vessel.
If the TV is exposed to seawater, it may cause
a re or damage the TV.
Medical institutions
Do not place this TV in a place where medical equipment is
in use. It may cause the medical equipment to malfunction.
Volume adjustment
• Adjust the volume to avoid disturbing your neighbors.
Sound carries easily at night. Therefore, we suggest you
close the windows or use headphones.
• When using headphones, adjust the volume to appropriate
levels, or hearing damage may result.
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the precautions
below.
Do not install the outdoor antenna system near of overhead
power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so that it can
provide some protection against voltage surges and built-up
static charges.
Section 810 of the National Electrical Code (NEC) in the
U.S.A. and Section 54 of the Canadian Electrical Code
in Canada provides information with in regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for the
grounding electrode.
Antenna grounding according to the National Electrical
Code, ANS/NFPAFPA 70
Antenna
Antenna discharge
unit
Grounding conductors
Power service grounding
electrode system
Ground clamps
Electric service
equipment
Ground clamp
CLEANING
Cleaning the AC power plug
Unplug the AC power plug and clean it
regularly. If the plug is covered with dust
and gathers moisture, its insulation may
deteriorate and result in a re.
Cleaning the screen surface/ cabinet of the TV set
When cleaning this TV, unplug the AC
power cord. If not, it may result in electric
shock. Use a dry soft cloth to clean the
cabinet of the TV. To remove dust near
the screen, wipe it gently with a soft cloth.
Stubborn stains may be
removed with a cloth slightly dampened with a solution of
mild soap and warm water. Never use strong solvents such
as thinner or benzine for cleaning. If using a chemically
pretreated cloth, please follow the instruction provided on
the package. The ventilation holes can accumulate dust over
time.
To ensure proper ventilation, we recommend you to remove
the dust periodically (once a month) using a vacuum cleaner,
while the LCD TV is powered off.
Disclaimer
Some chemical cleaners have been reported to damage the
screen and/or case of the LCD TV. ViewSonic will not be
liable for damage resulting from use of these cleaners.
CARRYING THE TV
Carry the TV as instructed
To prevent dropping the TV and causing serious injury, you
must follow these guidelines:
• Disconnect all cables before carrying the TV.
• Carrying the large size TV requires at least two or three
people.
• When you carry the TV, place your hands as illustrated and
hold it securely. Do not put stress on the LCD panel and
the frame around the screen.
• When carrying the TV, do not subject it to shocks, vibration,
or excessive force.
vi
• When lifting or moving the TV, hold it securely from the
bottom. Place your palm directly under the panel.
VENTILATION
Slots and openings in TV are provided for
ventilation.
To ensure reliable operation of the TV and
to protect it from overheating, be sure these
openings are not blocked or covered.
The TV may accumulate dust and get dirty if
proper ventilation is not provided. For proper
ventilation, follow the following guidelines:
• Never install the TV face up, down or
sideways.
• Never install the TV turned over or upside
down.
• Never cover the slots and openings with a
cloth or other materials.
• Never block the slots and openings by
placing the TV on a bed, sofa, rug or other
similar surface.
• Never place the TV in a conned space, such as a
bookcase or built-in cabinet, unless proper ventilation is
provided.
Leave some space around the TV set as shown below.
Otherwise, air-circulation may be inadequate and cause
overheating, which may cause a re or damage to the TV
set.
Installed on the wall
Installed with stan
d
4 inches
(10 cm)
4 inches
(10 cm)
2.375 inche
s
(6.03 cm)
11.875 inches
(30.16 cm)
4 inches
(10 cm)
4 inches
(10 cm)
4 inches
(10 cm)
11.875 inches
(30.16 cm)
Leave at least this space around the set.
Do not install the TV set as follows:
Air circulation is blocked. Air circulation is blocked.
Objects and ventilation holes
Never push any objects into the slots on the TV cabinet as
they may touch dangerous voltage points or short out parts
that could result in a re or an electric shock. Do not place
any objects on the TV.
MOISTURE
Moisture and ammable objects
• Keep the product away from moisture. Do not
expose this appliance to rain or moisture. Do
not place objects lled with liquids, such as
vases, on the TV.
• Do not use power-line operated TV sets
near water, such as in places like a bathtub,
washbowl, kitchen sink, laundry tub, a wet
basement, or near a swimming pool, etc. It
may cause re or electric shock.
• Do not let this TV get wet. Never spill liquid
of any kind on the TV. If water penetrates
into the product, unplug the power cord and
contact ViewSonic.
• Do not operate the TV when wet. It may result in electric
shock or damage to the TV.
• To prevent re, keep ammable objects or open ame (e.g.
candles) away from the TV.
INSTALLATION
Optional wall mount
To do Wall mount installation, you need a Wall-Mount
Bracket. When installing or removing the TV using the WallMount Bracket, be sure to use qualied contractors. If not
properly secured during installation or removal from the Wall-
Mount Bracket, the TV may fall and cause serious injury.
• When installing the TV using a Wall-Mount Bracket, make
sure you follow the operating instructions supplied with the
Wall-Mount Bracket.
• Attach the brackets supplied with the Wall-Mount Bracket.
• The TV is not designed for hanging from the ceiling. It may
fall and cause serious injury.
Placement
The TV should be installed near an easily accessible AC
power outlet.
Observe the following to prevent the TV from
falling from the stand or wall mount.
• Place the TV on a stable, level surface.
• Do not hang anything on the TV. Do not allow
children to climb on the TV.
Do not install the
TV in places subject to extreme temperature, such as in
direct sunlight, near a radiator, or heating vent. If the TV is
vii
exposed to extreme temperature, the TV may overheat and
cause deformation of the enclosure or cause malfunction.
• Do not install the TV in a place exposed to direct air
conditioning.
• If the TV is installed in such a location,
moisture may condense inside and may
cause a malfunction.
• Do not place the TV in hot, oily, humid or
excessively dusty places.
• Do not install the TV where insects may enter.
• Do not install the TV where it may be exposed to
mechanical vibration.
• Do not install the TV in a location where it may spear up,
such as on or behind a pillar, or where you might bump
your head on it. It may cause injury.
Preventing the TV from toppling over
To prevent the TV from toppling over, secure the TV to a wall
or stand.
Placement for watching
We suggest you to watch the TV at a distance of 3-7 times
that of the screen height, and not in excessive brightness.
It is easy to cause eye fatigue if you watch TV for too long
or in a dark room. To obtain clear picture, do not expose the
screen to direct illumination or sunlight. Use spot lighting
directed down from the ceiling if you can.
LCD SCREEN
• Although the LCD screen is made with high precision
technology and has effective pixels of 99.99% or more,
black dots or bright points or light (red, blue, or green) may
appear constantly on the LCD screen. This is a structural
property of the LCD panel and is not a malfunction.
• The LCD screen is made with high-precision technology.
To achieve a high level of performance and picture
quality, this TV’s backlight setting is set to maximize
the brightness of the TV. However, uneven brightness
may be observed when the LCD TV is viewed in a dark
environment without an input source or a blank screen.
This is a normal condition, not a malfunction of the TV. To
improve this condition, change the Picture mode, Backlight
setting, enable the Light Sensor, or turn on the Power
management.
• Avoid exposing the LCD screen surface to direct sunlight. It
is likely to damage the LCD panel.
• Do not push or scratch the LCD screen, or place objects on
top of the TV. The image may be uneven or the LCD panel
may be damaged.
• If the TV is used in a cold place, a smear may occur in the
picture or the picture may become dark. It is not caused
by a failure. This condition will improve as the temperature
rises.
• When still pictures are displayed continuously, ghosting
may occur. It should disappear after a short period of time.
• The screen and cabinet get warm when the TV is in use.
This is a normal condition.
• Spraying insect repellent with volatile material on the
screen will cause damage.
• Do not make prolonged contact with rubber or plastic
material.
Broken pieces
Do not throw anything at the TV.
Doing so may break the screen glass and
cause serious injury.
If the surface of the TV cracks, unplug the AC
power cord before touching the TV. Otherwise
electric shock may result.
Handling of broken glass and liquid crystal leakage
If the LCD panel gets damaged, crystalline liquid leakage
may occur, or scattered broken glass may result. Do not
touch broken glass or crystalline liquid which is toxic, with
bare hands as cuts, poisoning or skin irritation may occur.
Also do not glass fragments or leaked crystalline liquid get
into your eyes or mouth. Should either contacted your eyes
or mouth, rinse the contacted area thoroughly with water and
consult your doctor.
SERVICING
Do not attempt to repair the TV yourself,
since opening the cabinet may expose you
to dangerous voltage or other hazards.
Ask qualied service personnel to do the
servicing for your TV.
Replacement parts
When replacement parts are required, be sure the
service technician certies in writing that he/she has used
replacement parts specied by the manufacturer that have
the same characteristics as the original parts. Unauthorized
substitutions may cause a re, an electric shock or other
hazards.
Safety check
Upon completion of repairs to the TV, ask the service
technician to perform routine safety checks (as specied
by the manufacturer) to determine that the TV is safe for
operating, and to so certify.
Ask a qualied service technician to dispose of the TV.
1
Package Contents
Please make sure the following items are included with your LCD TV.
If any items are missing, please contact your dealer.
or
LCD TV Stand /Screw x 4pcs /
screw driver
Remote Control with batteries
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
RL
HDMI 1HDMI 2HDMI
3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
RL
HDMI 1HDMI 2HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
RL
HDMI 1HDMI 2HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
RL
HDMI 1HDMI 2HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
RL
HDMI 1HDMI 2HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
ViewSonic CD
(User Guide)
ViewSonic Quick Start Guide Power Cord
(for US model)
The photos of the accessories are for reference only, the color of the remote control, the type
of power cord are variable based on the actual models.
Getting Started
Getting Started
2
Installing the LCD TV
Installing the Stand
Figure 1 Figure 2 Figure 3
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
R L
HDMI 1 HDMI 2 HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
1. Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage. (see Figure 1)
2. Attach the foot stand and secure it with the included screws. Please fasten with a cross screw
driver. (see Figure 2)
3. Stand the TV up. (see Figure 3)
Disconnecting the Stand
1. Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage. (see Figure 1)
2. Remove the screws and detach the stand from the TV. (see Figure 2)
Figure 1 Figure 2
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
RL
HDMI 1HDMI 2 HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
R L
HDMI 1 HDMI 2 HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Getting Started
3
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to
the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic elds.
• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to rst remove the stand
before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
• Disconnect the power and any other cables that might hinder moving the LCD TV.
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or woolen
blanket to protect the screen surface from damage while installing plate.
• Before installing the LCD TV on the wall, ensure you have recorded the product serial number on
page (i) of the User Guide, as you will need the serial number to request service should there be
a service need.
• Install the wall mount plate to the LCD TV using screws NO LONGER than 12mm, as longer
screws found in universal (non-ViewSonic) wall mount kits may damage the power supply
causing the unit to fail. The wall-mount screw type is M4 x L12.
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
R L
HDMI 1 HDMI 2 HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
• Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD TV to
allow adequate cooling during operation.
• Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.
Enjoy your ViewSonic LCD TV!
Getting Started
4
Wall Mount Kit Specications (VESA)
When attaching to other building materials, please contact your nearest dealer.
Pr/CrPb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
R L
HDMI 1 HDMI 2 HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
A
B
D
C
Product Family inch VESA Spec. (A x B) Standard Screw
(C x D)
Quantity
LCD TV 27 100 x 100 mm M4 x L12 4
LCD TV 24 100 x 100 mm M4 x L12 4
• ViewSonic provides the standard dimensions for wall mount kits as shown in the table above.
• To nd the perfect mount, please browse www.viewsonic.com or call our service team:
United States 1-800-688-6688, Canada 1-866-463-4775, Europe +44 (0) 207 382 8250.
• When purchasing our wall mount kit, a detailed install manual and all parts necessary for assembly
are provided.
• Do not use the screws that longer than the standard dimension, as they may cause damage to the
inside of the TV set.
Getting Started
5
Front View of the Product
1 65432
Item Icon Description
1
LED Indicator Blue indicates power on. Red indicates standby mode.
Remote Control
Receiver
Receive IR signals from the remote control.
2 Volume
VOL -
Decrease the volume.
Move to the left or adjust the setting on the OSD menu.
VOL +
Increase the volume.
Move to the right or adjust the setting on the OSD
menu.
3 Channel Select
CH - Return to the previous channel.
CH + Advance to the next channel.
4 Menu MENU Turn the on-screen display (OSD) menu on / off.
5 Input INPUT
Select the input source.
Enter the submenu.
6 Power
Turn the power on from standby mode. Touch it again to
return to standby mode.
Getting Started
6
Rear View of the Product
PrPbYVIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
R L
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUT
RS232
USB
EARPHONE
OUT
87652 3 4
1
13
12
10
9
11
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN
PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT
AUDIO IN
R L
HDMI 1 HDMI 2 HDMI 3
SPDIF
OUT
RS232
EARPHONE
OUT
USB
Item Description
1 Power (AC input) Connect to the AC input power source.
2 Remote Control output
Connect to an IR emitter. This will enable the remote control of
external equipment.
3 TV Input Jack Connect to an antenna or cable TV.
4 VGA signal input Connect to a PC VGA port.
5 PC/VGA Audio input Connect to a PC line / audio port.
6 Composite Video input
Connect to the composite video output connectors on your A/V
equipment.
7 Audio input (left/ right)
Connect to the corresponding audio connectors on your A/V
device.
8 YPbPr signal input Connect to the YPbPr output of A/V device.
9 HDMI inputs Connect to the HDMI outputs of A/V devices.
10 SPDIF Optical output Connect to the SPDIF input of A/V device.
11 RS232 signal input Reserved for the service technician’s use.
12 USB Connect to USB devices, such as USB ash drive.
13 Earphone Jack
Connect to earphones. By connecting the earphones, you can
listen to the sound from the TV through the earphones.
j If you connect the earphones, the TV speakers will be muted.
Getting Started
7
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoy the high-denition and standard-denition digital programming along with standard-denition
analog programming.
☼
• This TV is capable of receiving unscrambled digital programming for both cable and external VHF/
UHF antenna.
• We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable
(not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Rear side of the TV
VHF/UHF/CABLE input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and antenna
programming, as shown below.
Cable
Antenna
Rear side of the TV
VHF/UHF/CABLE input
A-B RF switch
☼
• Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type you choose.
HD Cable Box/HD Satellite Box
You can also enjoy high-denition programming by subscribing to a high-denition cable service or
a high-denition satellite service. For the optimum picture quality, be sure to connect this device to
your TV via the HDMI or component video (with audio) input on the rear side of your LCD TV.
HDMI Connection
HDMI cable
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUT
RS232
USB
EARPHONE
OUT
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT
OUT
IN
AUDIO
L
R
Pb
LINE OUT
HDMI cable
HD cable box /
HD satellite box
CATV / Satellite
antenna cable
Rear side of the TV
Getting Started
8
DVI Connection
HDMI 1 HDMI 2 HDMI 3 SPDIF
OUT
RS232
PrPbYVIDEO
IN
PC/VGA
AUDIO
IN
AUDIO IN
R L
COMPONENT
VIDEO OUT
Pr Y
VIDEO
DVI-HDTV OUT
HDMI OUT
OUT
IN
AUDIO
L
R
Pb
LINE OUT
Audio cable
DVI-to-HDMI cable
Rear side of the TV
DVI-to-HDMI cable
CATV / Satellite
antenna cable
DVI-to-HDMI adapter Audio cable
HD cable box /
HD satellite box
☼
• For DVI connection, connect the HDMI jack (with DVI-to-HDMI cable or adapter), and connect the
audio jack to the AUDIO IN jacks of PC Audio input.
HDMI Timing Reference Chart
No. Mode HDMI DVI
1 VGA60 (640x480) V V
2 SVGA60 (800x600) V V
3 XGA60 (1024x768) V V
4 SXGA60 (1280x1024) V V
5 WXGA60 (1360x768) NA NA
6 1280 x 800 NA NA
7 1440 x 900 NA NA
8 1680 x 1050 NA NA
9 1920 x 1080 V V
10 480i60 V V
11 576i50 V V
12 480P60 V V
13 576P50 V V
14 720P50 V V
15 720P60 V V
16 1080I50 V V
17 1080I60 V V
18 1080P50 V V
19 1080P60 V V
20 1080P24 NA NA
21 1080P30 NA NA
Loading...