ViewSonic VT2300LED, VT2342 - 23"" LCD TV User Manual

- User Guide

- Guide de l’utilisateur

- Guía del usuario

LCD TV

IMPORTANT: Please read this User Guide to obtain important information on

installing and using your product in a safe manner, as well as registering your

product for future service. Warranty information contained in this User Guide will

describe your limited coverage from ViewSonic Corporation, which is also found

on our web site at http://www.viewsonic.com in English, or in specifi c languages

using the Regional selection box in the upper right corner of our website. “Antes

de operar su equipo lea cuidadosamente las instrucciones en este manual”

ViewSonic

®

ViewSonic

®

VT2300LED

Model No. : VS13215-1M

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

Important Safety
Instructions

3. Heed all warnings.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

4. Follow all instructions.

1. Read these instructions.

2. Keep these instructions.

the apparatus.

the apparatus. When a cart is

bracket, or table specified
by the manufacturer, or sold with

12. Use only with the cart, stand,

tripod,

to avoid injury from tip-over

7. Do not block any ventilation openings. Install in

accordance with the manufactyrer s instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other.
A grounding type plug has two blades and a third
grounding prong. The wide blade or the third

prong is provided for your safety. If the provided

electrician for replacement of the obsolete outlet.

plug does not fit into your outlet, consult an

10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from

11. Only use attachments/accessories specified
by the manufacturer.

13. Unplug this apparatus during lightning storms
or when unused for long periods of time.

14. Refer all servicing to qualified service
personnel. Servicing is required when the

apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.

the cart/apparatus combination

used, use caution when moving

15. The socket-outlet (receptacle) shall be
installed near the equipment and shall be easily

accessible and the AC mains disconnect device
(plug) shall remain readily operable.

16. The apparatus shall not be exposed to dripping
or splashing. No objects filled with liquids, such
as vases, shall be placed on or near the apparatus.

WARNING:

Some products are equipped with a three-wire

TO REDUCE THE RISK OF FIRE OR

EXPLANATION OF SYMBOLS:

EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

WARNING:

Placed on the product to mean...

Placed on the product to mean...

Caution, refer to accompanying
documentation before proceeding.

Warning, access to this area is

restricted. Failure to comply could

electrical grounding-type plug that has a third pin
for grounding. This plug only fits into a grounded

electrical outlet. This is a safety feature. Make

sure the AC outlet is properly grounded. Do not

defeat the safety purpose of the grounding-type

ELECTRIC SHOCK, DO NOT

This aymbol would then be located

in the manual section adjacent to the

marking that refers to the area of

concern.

result in an electrical shock hazard.

outlet. If you cannot insert the plug into the outlet,

plug by trying to insert it

into a non-grounded

contact your electrician to

replace the outlet.

ViewSonic i

ENGLISH

VT2300LED

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ANTENNAS
Outdoor antenna grounding

If an outdoor antenna is installed, follow the
precautions below. Do not install the outdoor antenna
system in near of overhead power lines or other
electric light or power circuits, or where it can come in
contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA
SYSTEM, EXTREME CARE SHOULD BE TAKEN
TO KEEP FROM CONTACTING SUCH POWER
LINES OR CIRCUITS AS CONTACT WITH THEM
IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so that it can
provide some protection against voltage surges and
built-up static charges.

Section 810 of the National Electrical Code (NEC) in
the U.S.A. and Section 54 of the Canadian Electrical
Code in Canada provides information with in regard to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.

Antenna grounding according to the
National Electrical Code, ANS/NFPA 70

Antenna

Antenna discharge
unit

Grounding conductors
Power service grounding
electrode system

Ground clamps

Electric service

equipment

Ground clamp

NEC: National Electrical Code

CLEANING
Cleaning the AC power plug

Unplug the AC power plug and clean
it regularly. If the plug is covered with
dust and gathers moisture, its insulation
may deteriorate and result in a fi re.

Cleaning the screen surface/
cabinet of the TV set

When cleaning this TV, unplug the
AC power cord. If not, it may result
in electric shock. Use a dry soft cloth
to clean the cabinet of the TV. To remove dust form
the screen, wipe it gently with a soft cloth. Stubborn
stains may be removed with a cloth slightly dampened
with a solution of mild soap and warm water. Never
use strong solvents such as thinner or benzine for
cleaning. If using a chemically pretreated cloth, please
follow the instruction provided on the package. The
ventilation holes can accumulate dust over time. To
ensure proper ventilation, we recommend you to
remove the dust periodically (once a month) using a
vacuum cleaner, while the LCD TV is powered off.

ViewSonic ii

ENGLISH

VT2300LED

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ENGLISH

Dear ViewSonic customer,

For assistance, please contact ViewSonic service team at http://www.viewsonic.com
or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775.
To purchase or inquire about any accessories and installation services for your TV, please visit

www.viewsonic.com or call: United States 1-800-688-6688, Canada 1-866-463-4775.

Important! Please save the original box and all packing material for future shipping needs.

We recommend you registering your TV on the internet at: www.viewsonic.com

Product Registration

To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com.

For Your Records

Product Name:
ViewSonic LCD TV
Model Number:
Document Number:
Serial Number: ____________________________________________
Purchase Date: ____________________________________________

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. Your local waste disposal company may provide
information about proper disposal.

Customer Support

For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.

Country/Region Web Site Telephone

United States www.viewsonic.com

T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-1202

Canada www.viewsonic.com

T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-1202

Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: [phone] CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: [phone]
Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico

ViewSonic iii

VT2300LED

[ ] VT2300LED

[ ] VS13215-1M

your TV, please read these instructions before any operations.

Congratulations on your purchase of a ViewSonic LCD TV display. For maximum benefi t of

VT2300LED-1M_UG_ENG Rev. 1A 01-01-10

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ENGLISH

Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:

Name, address, of manufacturer and importers:

México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: [phone]
http://www.viewsonic.com/la/soporte/index.htm

NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004

Hermosillo:

Distribuciones y Servicios Computacionales SA de CV.
Calle Juarez 284 local 2
Col. Bugambilias C.P: 83140
Tel: [phone]
E-Mail: [e-mail]

Villahermosa:

Compumantenimietnos Garantizados, S.A. de C.V.
AV. GREGORIO MENDEZ #1504
COL, FLORIDA C.P. 86040
Tel: [phone]
E-Mail: [e-mail]

Puebla, Pue. (Matriz):

RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
72160 PUEBLA, PUE.
Tel: [phone] CON 10 LINEAS
E-Mail: [e-mail]

Veracruz, Ver.:

CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: [phone]
E-Mail: [e-mail]

Chihuahua

Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: [phone]
E-Mail: [e-mail]

Cuernavaca

Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: [phone]
E-Mail: [e-mail]

Distrito Federal:

QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: [phone]
E-Mail : [e-mail]

Guadalajara, Jal.:

SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: [phone]
E-Mail: [e-mail]

Guerrero Acapulco

GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: [phone]

Monterrey:

Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: [phone]
E-Mail: [e-mail]

MERIDA:

ELECTROSER
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: [phone]
E-Mail: [e-mail]

Oaxaca, Oax.:

CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: [phone]
Fax: [phone]
E-Mail. [e-mail]

Tijuana:

STD
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico

FOR USA SUPPORT:

ViewSonic Corporation
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: [phone] (English); 866-323-8056 (Spanish);
Fax: [phone]
E-Mail: http://www.viewsonic.com

4.3: ViewSonic Mexico Limited Warranty

ViewSonic iv

VT2300LED

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ENGLISH

Caution

ViewSonic Wall-Mount
kit model

WMK-10

Use with other Wall-Mount kit may cause instability and possibly result in injury.

team: United States 1-800-688-6688, Canada 1-866-463-4775.

Copyright Information

®

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.

ENERGY STAR

®

is a registered trademark of the U.S. Environmental Protection Agency

(EPA). As an ENERGY STAR

®

partner, ViewSonic Corporation has determined that this

product meets the ENERGY STAR® guidelines for energy effi ciency.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.

ViewSonic v

VT2300LED

VT2300LED

To fi nd the perfect mount for VT2300LED, please browse www.viewsonic.com or call our
service

Please use the following ViewSonic LCD TVs only with the following wall-mount kit.

ViewSonic LCD TV Model No.

Copyright © ViewSonic Corporation, 2010. All rights reserved.

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ENGLISH

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning:

You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection systems according to local law.

ENERGY STAR Information:

• Keeping the TV at its factory default settings that meet ENERGY STAR criteria.

• Enabling certain features and functionality of LCD TV will increase its energy
consumption, possibly beyond the limits required for ENERGY STAR qualifi cation.

ViewSonic vi

VT2300LED

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ENGLISH

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC
of the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:

Substance

Proposed Maximum

Concentration

Actual Concentration

Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr

6+

) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:

Examples of exempted components are:

1. Mercury in compact fl uorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifi cally mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fl uorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.

ViewSonic vii

VT2300LED

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 1

Contents

Getting Started

Package Contents ........................................................................................... 2

Disconnecting the Stand ................................................................................ 2

Disconnecting the Stand ................................................................................ 2

Mounting ViewSonic LCD TV to the wall ....................................................... 3

Front View and Right View of the Product .................................................... 4

Rear View and Left View of the Product ........................................................ 5

Connecting the LCD TV .................................................................................. 7

Using the TV Features

Remote Control and TV Controls ................................................................... 9

Inserting Remote Control Batteries ................................................................ 9

Remote Control and TV Controls ................................................................... 9

Programming your Cable or Satellite Box remote........................................ 10

Setup Wizard .................................................................................................. 11

Operation ......................................................................................................12

Other Information

Troubleshooting ............................................................................................21

Specifi cations ................................................................................................ 22

Limited Warranty ........................................................................................... 23

Mexico Limited Warranty .............................................................................. 24

ENGLISH

Customer Support ........................................................................................... iii

Caution ............................................................................................................. iv

Product Registration ....................................................................................... iii

Copyright Information ..................................................................................... v

Compliance Information ................................................................................. vi

Declaration of RoHS Compliance .................................................................. vii

Important Safety Instructions .......................................................................

i

VT2300LED

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 2

Getting Started

Package Contents

Please make sure the following items are included with your LCD TV.
If any items are missing, please contact your dealer.

ediuG resU cinoSweiV • VT DCL •

• Remote Control with batteries • ViewSonic Quick Start Guide

• Power Cord

Disconnecting the Stand

Disconnecting the Stand

Figure 1

3 erugiF2 erugiF

5 erugiF 6 erugiF4 erugiF

Caution

ViewSonic Wall-Mount kit model WMK-10

Use with other Wall-Mount kit may cause instability and possibly result in injury.

team: United States 1-800-688-6688, Canada 1-866-463-4775.

ENGLISH

VT2300LED

VT2300LED

service

1. Lay the TV flat on a table with the LCD screen face down. To prevent the TV
from being scratched, put a piece of soft cloth on the table on which the screen will be set.

2. Loosen the screw on the bottom of the stand, and then disassemble the
base part of the stand. (see Figure1 and 2)

3. Press on the top edge of hinge cover and pull it down to disassemble the cover. (see

Figure 3)

4. Remove the 4 screws on the hinge, then pull up the stand slowly. (see Figure 4

and 5)

5. Then, you shall successfully uninstall the stand. (see Figure 6)

Please use the following ViewSonic LCD TVs only with the following wall-mount kit.

ViewSonic LCD TV Model No.

To find the perfect mount for VT2300LED , please browse www.viewsonic.com or call our

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 3

Getting Started

Mounting ViewSonic LCD TV to the wall

The LCD TV can be used in a free standing position or wall-mounted. Before installing the
product to the wall, please consider the following guidelines:

• Read the Important Safety Instructions, at the start of this manual.

• Do not install in a moist or wet environment. This equipment is intended for indoor use.

• Do not install near heat source, or strong magnetic fi elds.

• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.

• Before attaching the wall mount plate to the back cover, ensure the product is working.

• If your LCD TV is already set up for free-standing operation, you need to fi rst remove the

stand before mounting the device to the wall.

To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:

• Disconnect the power and any other cables that might hinder moving the LCD TV.

• Set the LCD TV on a table or work surface, placing the screen face down on a towel or

woolen blanket to protect the screen surface from damage while installing plate.

• Before installing the LCD TV on the wall, ensure you have recorded the product serial

number on page (i) of the User Guide, as you will need the serial number to request
service should there be a service need.

• Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm,

as longer screws found in universal (non-ViewSonic) wall mount kits may damage the
power supply causing the unit to fail. The wall-mount screw type is M4 x L10.

• Mount the wall mount bracket to the wall ensuring use of proper screws to support the

TV to allow adequate cooling during operation.

• Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.

Enjoy your ViewSonic LCD TV!

ENGLISH

VT2300LED

installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD