ViewSonic VP171b, VP171, VP171S User Manual

VP171

LCD Display

VP171b
VP171s

User Guide

Guide de l’utilisateur

Bedienungsanleitung

Guía del usuario

Guida dell'utente

Guia do usuário

Användarhandbok

Käyttöopas

Jmdh\h^kl\hihevah\Zl_ey

Használati útmutató

Full 17.0" Diagonal Viewable Screen

PodrĊcznik uĪytkownika

Uživatelská píruka

Contents

Product Registration ............................................. 2

For Your Records ................................................. 2

Getting Started

Package Contents ................................................ 3

Precautions .......................................................... 3

Quick Installation .................................................. 4

Landscape/Portrait Modes ................................... 5

To Raise and Lower the display ...........................5

Installation of Wall Mount (Optional) .................... 6

Using the LCD Display

Setting the Timing Mode ...................................... 7

OSD and Power Lock Settings............................. 7

Adjusting the Screen Image ................................. 8

Main Menu Controls ............................................ 10

Other Information

Specifications ..................................................... 14

Troubleshooting.................................................. 15

Customer Support .............................................. 16

Cleaning the LCD Display .................................. 17

Limited Warranty ................................................ 18

Appendix

Safety Guidelines ............................................... 19

Compliance Information for U.S.A. ..................... 20

CE Conformity for Europe .................................. 20

07/13/04 E ViewSonic VP171/VP171b/VP171s 1

Copyright © ViewSonic Corporation, 2004. All rights reserved.

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.

NERGY STAR

E

As an E

NERGY STAR

E

®

is a registered trademark of the U.S. Environmental Protection Agency (EPA).

NERGY STAR

®

guidelines for energy efficiency.

®

partner, ViewSonic Corporation has determined that this product meets the

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this mate­rial, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at:

www.viewsonic.com.

The ViewSonic
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you
may mail or fax to ViewSonic.

For Your Records

®

Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:

ViewSonic VP171/b/s

VLCDS25972-1W/2W/3W
A-CD-VP171-1/b-1/s-1

______________
______________

Product disposal at end of product life

ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. For TCO'03 recycling information, please refer to our website:

1. USA: www.viewsonic.com/pdf/recyclePlus.pdf

2. Europe: www.viewsoniceurope.com

3. Taiwan: recycle.epa.gov.tw

ViewSonic VP171/VP171b/VP171s 2

Getting Started

Congratulations on your purchase of a ViewSonic® LCD display.

Important!

needs.

Save the original box and all packing material for future shipping

NOTE:

The word “Windows” in this user guide refers to the following Microsoft
operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000,
Windows Me (Millennium), and Windows XP.

Package Contents

Yo u r LCD display package includes:

• LCD display

• Power cords

Video cables (VGA and DVI)

•

• ViewSonicWizard CD-ROM

•

PerfectPortraitsoftwareCD-ROM

(Not included with VP171-H/VP171b-H/VP171s-H)

NOTE:

The CD jacket contains the Quick Start Guide, and the CD includes the
User Guide PDF files and INF/ICM display optimization files. The INF file
ensures compatibility with Windows operating systems, and the ICM file (Image
Color Matching) ensures accurate on-screen colors. ViewSonic
that you install both files.

TM

recommends

Precautions

• Sit at least 18" from your LCD display.

•

Avoid touching the screen.

difficult to remove.

•

Never remove the rear cover.

LCD display contains high-voltage
parts. You may be seriously injured if you
touch them.

• Avoid exposing your LCD display to
direct sunlight or another heat source. Orient
your LCD display away from direct
sunlight to reduce glare.

• Always handle your LCD display with
care when moving it.

Skin oils are

Your

• Place your LCD display in a well­ventilated area. Do not place anything on your
LCD display that prevents heat
dissipation.

• Ensure the area around the LCD display
is clean and free of moisture.

• Do not place heavy objects on the LCD display,
video cable, or power cord.

• If smoke, abnormal noise, or strange odor is
present, immediately switch the LCD display
off and call your dealer or ViewSonic.
It is dangerous to continue using the
LCD display.

ViewSonic VP171/VP171b/VP171s 3

Quick Installation

1 Connect power cord and AC/DC

adapter

2 Connect video cable

• Make sure both the LCD display
and computer are turned OFF

• Remove rear panel covers if necessary

• Connect the video cable from the LCD

display to the computer

Macintosh users:

require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.

To order a ViewSonic
contact ViewSonic

Models older than G3

®

Macintosh adapter,

Customer Support

.

3 Turn ON LCD Display and

computer

Turn ON the LCD display, then turn
ON the computer. This sequence (LCD display
before computer) is important.

NOTE:

message asking them to install the INF file.
This is on the CD.

Windows users may receive a

4 Insert the ViewSonic Wizard CD

into the computer’s CD drive.

Follow the on-screen instructions.

If your computer does not have a CD-ROM
drive, see “Customer Support.”

4 Wizard CD (continued)

(1) Wait for the CD-ROM to auto-start.

NOTE:

double-click on the CD-ROM icon in the
Windows Explorer, then double-click on

viewsonic.exe.

(2) Follow the on-screen instructions.

If the CD-ROM does not auto-start:

5 Windows users: Set the timing

mode (resolution and refresh
rate)

Example:

For instructions on changing the resolution
and refresh rate, see the graphic card’s user
guide.

Installation is complete. Enjoy your new
ViewSonic, LCD display.

To be best prepared for any future customer
service needs: print this user guide and write
the serial number in
page 2. (See back of LCD display.)

You can register your product online at the
website for your region. See the Customer
Support table in this guide.

The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.

1280 x 1024 @ 60 Hz.

“For Your Records”

on

D-SUB 2

Power cord

AC outlet
(wall socket)

DVI-D

D-SUB 1

AC IN

Power Switch

Computer
power cord

ViewSonic VP171/VP171b/VP171s 4

Landscape/Portrait Modes

The LCD display can operate in either Landscape or Portrait mode.
Follow the instructions that accompany the Perfect Portrait software.

Note: Before using the portrait
display mode, first install the Perfect

Portrait
your LCD display.

Perfect Portrait software is
compatible with most PCI and AGP
graphics (video) cards.

For information about compatible
graphics cards and approved
hardware configurations, go to the

Landscape

Portrait

ViewSonic website, http://
www.viewsonic.com

To switch from Landscape (default) to Portrait mode, do the following:

From the front, gently raise the LCD display to allow more clearance.

1
2 Pull the bottom of the LCD display outward and away from the base.

Manually rotate the LCD display clockwise 90 degrees as shown above.

3

TM

software included with

To Raise and Lower the display

You can easily raise and lower the display panel (the head) manually. As you
face the front of the display, take hold of each side of the head and pull up or
down. The panel should move easily.

ViewSonic VP171/VP171b/VP171s 5

Installation of Wall Mount (Optional)

To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to
the instructions that come with the base mounting kit. To convert your
LCD display from a desk-mounted to a wall-mounted display, do the following:

Disconnect Power.

1
2 Lay the LCD display face down on

a towel or blanket.
Pull the back plate away from the

3

head of the LCD display. Let the
plate hang on the neck of the
LCD display as shown on the left.
Notice the four screws.

Remove the four screws from the

4

back plate.

Remove
four

screws

5 Attach the mounting bracket

from the VESA compatible wall­mounting kit (100 mm x 100 mm
distance).

Attach the LCD display to the wall,

6

following the instructions in the
wall-mounting kit.

ViewSonic VP171/VP171b/VP171s 6

Using the LCD Display

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The

resolution

example 75 Hz). After setting the timing mode, use the OnView
to adjust the screen image.
For the best picture quality set your LCD display timing mode to:

VESA 1280 x 1024 @ 60Hz.

To set the Timing Mode:

(example 1280 x 1024) and

refresh rate

timing mode

(or vertical frequency;

consists of the

®

controls

Set the resolution: Right-click on the Windows desktop >

1

Settings

Set the refresh rate: See your graphic card's user guide for instructions.

2

WARNING:

maximum refresh rate of 75Hz; doing so may result in permanent damage to
your LCD display .

> set the resolution.

Do not set the graphics card in your computer to exceed the

Properties

>

OSD and Power Lock Settings

•

OSD Lock:

buttons are pressed the message

•

OSD Unlock:

•

Power Button Lock:

seconds. If the power button is pressed the message
will display for 5 seconds. With or without this setting, after a power failure,
your LCD display’s power will automatically turn ON when power is
restored.

Press and hold [1] and the up arrow ▲ for 10 seconds. If any

OSD Locked

Press and hold [1] and the up arrow

Press and hold [1] and the down arrow

will display for 5 seconds.

again for 10 seconds.

▲

for 10

▼

Power Button Locked

Power Button Unlock:

seconds.

Press and hold [1] and the down arrow

ViewSonic VP171/VP171b/VP171s 7

again for 10

▼

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OnView®
controls which display on the screen. The OnView controls are explained at the
top of the next page and are defined in “Main Menu Controls” on page 9.

Main Menu
with OnView controls

Front Control Panel
shown below in detail

Displays the Main Menu
or exits the control screen
and saves adjustments.

Scrolls through menu options and
adjusts the displayed control.

Also a shortcut to display the
Contrast adjustment control
screen.

Displays the control
screen for the highlighted
control.

Also toggles between two
controls on some
screens.

Also a shortcut to toggle
analog and digital connection.

Power light
Green = ON
Orange = Power

Saving

Power
On/Off

ViewSonic VP171/VP171b/VP171s 8

Do the following to adjust the screen image:

To display the Main Menu, press button [1].

1

NOTE:

All OnView menus and adjustment screens disappear automatically
after about 15 seconds. This is adjustable through the OSD timeout setting in the
setup menu.

2

To select a control you want to adjust, press ▲ or ▼ to scroll up or down the
Main Menu.

3

After the control is selected, press button [2]. A control screen like the one
shown below appears.

The command line at the
bottom of the control screen
tells what to do next from this
screen. You can toggle
between control screens,
adjust the selected option, or
exit the screen.

4

To adjust the control, press the up ▲ or down ▼ buttons.

5

To save the adjustments and exit the menu, press button [1]

twice

.

The following tips may help you optimize your display:

• Adjust your computer's graphic card so that it outputs a video signal 1280 x

1024 @ 60Hz to the LCD display. (Look for instructions on "changing the
refresh rate" in your graphic card's user guide.)

• If necessary, make small adjustments using H POSITION and V POSITION

until the screen image is completely visible

. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
LCD display.)

ViewSonic VP171/VP171b/VP171s 9

Main Menu Controls

Adjust the menu items shown below by using the up ▲ and down ▼ buttons.

Control Explanation

Auto Image Adjust

automatically.

Contrast

(black level) and the foreground (white level).

Brightness

Input Select

computer connected to the VP171/VP171b.

Color Adjust

color temperatures and
green (G), and blue (B) separately. The factory setting for this
product is 6500K (6500 Kelvin).

adjusts the difference between the image background

adjusts background black level of the screen image.

toggles between inputs if you have more than one

sizes and centers the screen image

provides several color adjustment modes: preset

RGB

which allows you to adjust red (R),

9300K

in most office settings with fluorescent lighting).

6500K

richer red.

5400K

5000K

color.

— Adds blue to the screen image for cooler white (used

— Adds red to the screen image for warmer white and

— Adds green to the screen image for a darker color.

— Adds blue and green to the screen image for a darker

ViewSonic VP171/VP171b/VP171s 10

Control Explanation

User Color

and blue (B)

1

To select color (R, G or B) press button [2].

2

To adjust selected color, press ▲ or ▼.

Important

— Individual adjustments for red (R), green (G),

.

: If you select RECALL from the Main Menu when
the product is set to a Preset Timing Mode, colors return to the
6500K factory preset.

Information

displays the timing mode (video signal input)
coming from the graphics card in your computer, the LCD
model number, the serial number, and the ViewSonic website
URL. See your graphic card’s user guide for instructions on
changing the resolution and refresh rate (vertical frequency).

NOTE:

VESA 1280 x 1024 @ 60Hz (recommended) means
that the resolution is 1280 x 1024 and the refresh rate is 60
Hertz.

Manual Image Adjust Sub-menu

H. Size (Horizontal Size)

H./V. Position (Horizontal/Vertical Position)

adjusts the width of the screen image.

image left or right and up or down.

moves the screen

ViewSonic VP171/VP171b/VP171s 11

Control Explanation

Fine Tune

sharpens the focus by aligning the text and/or graphic

characters.

NOTE:

Sharpness

Try Auto Image Adjust first.

adjusts the clarity and focus of the screen image.

Setup menu displays the menu shown below:

Language

allows you to choose the language used in the menus

and control screens.

Resolution Notice

allows you to enable or disable this notice.

If you enable the Resolution Notice shown above and your
computer is set at a resolution other than 1280 x 1024, the
following screen appears.

ViewSonic VP171/VP171b/VP171s 12

Control Explanation

Input Priority

If multiple computers will be connected to the display,
this function can be used to select which computer has priority
Depending on the selected Input Priority, the display will do a one
time detection for available inputs when first powered on.

For example: If the Input Priority setting is D-SUB=>D-SUB2=>DVI,
then the first priority will be given to D-SUB1 when the display turns
on. If there is no video signal on D-SUB1, then the next priority will be
given to D-SUB-2, etc… In the case of only one signal being present at
the three inputs, then the display will automatically detect and display
that signal.

The Input Priority setting can also be disabled. In this case, the input
will return to the last setting when the display is first turned on. The
user will need to control all the port settings manually under this
condition. Inputs can be switched quickly by pressing the "Up" arrow
button on the front panel controls.

OSD Position

allows you to move the on-screen display menus

and control screens.

OSD Timeout

sets the length of time the on-screen display
screen is displayed. For example, with a “30 second” setting, if a
control is not pushed within 30 seconds, the display screen
disappears.

OSD Background

On/Off

allows you to turn the On-Screen Display

background On or Off.

OSD Pivot

This function is used to rotate the OSD menu,

when the display is changed from Landscape to Portrait mode.

Memory Recall

returns the adjustments back to factory settings
if the display is operating in a factory Preset Timing Mode listed
in the Specifications of this manual.

ViewSonic VP171/VP171b/VP171s 13

Other Information

Specifications

LCD

Input signal

Compatibility

Resolution

Power

Display area

Operating
conditions

Ty p e

Color Filter
Glass surface

Video Sync

PC
Macintosh

Recommended
and supported

Voltage 100-240 VAC, 50/60 Hz (auto switch)

Full Scan 337.9mm (H) x 270.3mm (V)

Temperature
Humidity
Altitude

1

17" (full 17" viewable diagonal area),
TFT (Thin Film Transistor), Active Matrix SXGA LCD,

0.264 mm pixel pitch
RGB vertical stripe
Anti-Glare

RGB analog (0.7/1.0 Vp-p, 75 ohms)
Composite Sync, Separate Sync, Sync on Green

TMDS Digital (100ohms)

:30-82 kHz, fv:50-85 Hz

f

h

Up to 1280 x 1024 Non-interlaced
Power Macintosh

1280 x 1024 @ 60, 70, 72, 75 Hz
1024 x 768 @ 60, 70, 72, 75, 85 Hz
800 x 600 @ 56, 60, 72, 75, 85 Hz
640 x 480 @ 60, 75, 85 Hz
720 x 400 @ 70 Hz

13.3" (H) x 10.64" (V)

32° F to + 104° F (0° C to + 40° C)
10% to 90% (no condensation)
To 10,000 feet

up to 1280 x 1024

Storage
conditions

Dimensions

Weight

Temperature
Humidity
Altitude

Physical

LCD display only

Physical

LCD display only

Regulations

Power saving
modes

Preset Timing Mode

Warning:

result in permanent damage to the LCD display.

1

Macintosh computers older than G3 require a ViewSonic®, Macintosh adapter. To order an adapter,

contact ViewSonic.

Do not set the graphics card in your computer to exceed these refresh rates; doing so may

On Normal (green LED)
Active Off <2W (orange LED)

(pre-adjusted to VESA® 1280 x 1024 @ 60 Hz)

-4° F to + 140° F (-20° C to + 60° C)
10% to 90% (no condensation)
To 40,000 feet

392.0 mm (W) x 350.0 mm (H) x 238.0 mm (D)

15.4" (W) x 13.8" (H) x 9.4" (D)

371.0 mm (W) x 309.0 mm (H) x 65.4 mm (D)

14.6" (W) x 12.2" (H) x 2.6" (D)

14.31 lb (6.5 kg)

9.3 lb (4.2 kg)

UL, FCC-B,
NEMKO, SEMKO, DEMKO, FIMKO, TCO’03(VP171/
VP171s), TCO'99(VP171b),PCT (BZ02),TUV/GS, BSMI,
B-Mark, S-Mark, PSB, CCC, VCCI, C-Tick

NERGY STAR

E

®

, c-UL, Ic-B, CE, MPRII,

ViewSonic VP171/VP171b/VP171s 14

Troubleshooting

No power

• Make sure power button (or switch) is ON.

• Make sure A/C power cord is securely connected to the LCD display.

• Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.

Power is ON but no screen image

• Make sure the video cable supplied with the LCD display is tightly
secured to the video output port on the back of the computer. If the other end
of the video cable is not attached permanently to the LCD display,
tightly secure it to the LCD display.

• Adjust brightness and contrast.

• If you are using an Macintosh older than G3, you need a Macintosh adapter.

Wrong or abnormal colors

• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.

• Connect the LCD display to another computer.

• If you have an older graphics card, contact ViewSonic for a non-DDC
adapter.

Control buttons do not work

• Press only one button at a time.

ViewSonic VP171/VP171b/VP171s 15

Customer Support

For technical support or product service, see the table below or contact your
reseller.

NOTE:

You will need the product serial number.

Country/
Region

United States

Canada

United Kingdom

Europe, Middle
East, Baltic
countries, and
North Africa

Australia and New
Zealand

Web site T = Telephone

F = FAX

www.viewsonic.com/

support

www.viewsonic.com/

support

www.viewsoniceurope.com

www.viewsoniceurope.com

www.viewsonic.com.au

T: [phone]
F: [phone]

T: [phone]
F: [phone]

0800 833 648

T:
F: [phone]

Contact your
reseller

T: [phone]
F: [phone]

Email

service.us@
viewsonic.com

service.ca@
viewsonic.com

service.eu@
viewsoniceurope.com

service.eu@
viewsoniceurope.com

service@au.
viewsonic.com

Singapore/

Malaysia/Thailand

South Africa/
Other countries

Hong Kong

www.viewsonic.com.sg

www.viewsonic.com

www.hk.viewsonic.com

T: 65 273 4018
F: 65 273 1566

T: 886 2 2246 3456

886 2 8242 3668

F:

T: 886 2 2246 3456
F: 886 2 8242 3668 viewsonic.com

service@sg.
viewsonic.com

service@sd.
viewsonic.com

service@hk.

ViewSonic VP171/VP171b/VP171s 16

Cleaning the LCD Display

• MAKE SURE THE LCD DISPLAY IS TURNED OFF.

• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.

To clean the screen:

Wipe the screen with a clean, soft, lint-free cloth. This removes dust and

1

other particles.
If still not clean, apply a small amount of non-ammonia, non-alcohol based

2

glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

Use a soft, dry cloth.

1

If still not clean, apply a small amount of a non-ammonia, non-alcohol

2

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then
wipe the surface.

Disclaimer

ViewSonic does not recommend the use of any ammonia or alcohol-based
cleaners on the LCD display screen or case. Some chemical cleaners have
been reported to damage the screen and/or case of the LCD display display.
ViewSonic will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaners.

ViewSonic VP171/VP171b/VP171s 17

Limited Warranty

VIEWSONIC LCD DISPLAY

What the warranty covers:

®

ViewSonic

warranty period. If a product proves to be defective in material or workmanship during the warranty
period,
product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:
ViewSonic

three (3) years for all labor from the date of the first consumer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

b. Repair or attempted repair by anyone not authorized by
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.

3. Removal, installation, and set-up service charges.

How to get service:

1. For information about receiving service under warranty, contact
You will need to provide your product's serial number.

2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

3. Take or ship the product freight prepaid in the original container to an authorized
service center or

4. For additional information or the name of the nearest

ViewSonic

Limitation of implied warranties:

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusion of damages:

VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES
BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Effect of state law:

This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.

Sales outside the U.S.A. and Canada:

For warranty information and service on
contact

ViewSonic LCD Warranty (V3.0) Release Date: 01-29-2002

warrants its products to be free from defects in material and workmanship during the

ViewSonic

LCD displays are warranted for three (3) years for all parts including the light source and

modification, or failure to follow instructions supplied with the product.

ViewSonic

will, at its sole option, repair or replace the product with a like product. Replacement

.

ViewSonic Customer Support

ViewSonic

service center, contact

ViewSonic

.

or your local

.

ViewSonic

ViewSonic

ViewSonic

products sold outside of the U.S.A. and Canada,

dealer.

ViewSonic

’s specifications.

ViewSonic

.

ViewSonic VP171/VP171b/VP171s 18

Appendix

Safety Guidelines

CAUTION:

CAUTION:

certified for the individual country. Some examples are listed below:

The socket-outlet should be installed near the equipment and should be easily accessible.

Use a power cable that is properly grounded. Always use the appropriate AC cord that is

USA.................UL

Canada.............CSA

Germany.......... VDE

Switzerland ..... SEV

Britain ............. BASE/BS

Japan ............... Electric Appliance Control Act

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The power cord set for this unit has been enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1
below):

Figure A1

Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according
to the current rating for your unit. Please consult the table below for the selection criteria for power cords
used in the United States and Canada.

Cord Type Size of Conductors in Cord Maximum Current Rating of Unit

SJT 18 AWG

16 AWG
14 AWG

SVT 18 AWG

17 AWG

10 Amps
12 Amps
12 Amps

10 Amps
12 Amps

For European Countries

In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR­Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.

AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE
CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN
APPROPRIATE SOCKET.

If a new plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

WARNING:
IMPORTANT:

If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by
the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.

If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you
have purchased the product.

THIS APPLIANCE MUST BE EARTHED.

The wires in this mains lead are coloured in accordance with the following code:

Green-and-Yellow: Earth
Blue: Neutral
Brown: Live

ViewSonic VP171/VP171b/VP171s 19

Compliance Information for U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi­dential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer­ence to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

To assure continued FCC compliance, the user must use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a
shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this device.

CE Conformity for Europe

The device complies with the requirements of the EEC directive 89/336/EEC
as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard
to “Safety.”

ViewSonic VP171/VP171b/VP171s 20

ViewSonic Corporation