ViewSonic VP201b-1, VP201s-1, VLCDS26064-2W, VLCDS26064-3W, VP211b-1, VLCDS26064-4W Service manual
Specifications and Main Features
Frequently Asked Questions
User Manual
Service Manual
ViewSonic VP201b/s-1
VP211b-1
Model No.
VLCDS26064-2W
VLCDS26064-3W
VLCDS26064-4W
20" & 21" Color TFT LCD Display
(VP201b-1_SM_685, VP201s-1_SM_701, VP211b-1_SM_684 - Rev. 1a – Aug. 2003)
ViewSonic
381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
2003 by ViewSonic Corporation. All rights reserved. No part of this publication may be
¤
Revision History
RevisionDateDescription Of ChangesApproval
1a 28/08/03 Initial Release DCN-3387,3506,3604Fellen. Fan
Input signals: a. Analog R / G / B (0.7Vp-p/75 ohm) Positive.
Input connector: a. Analog D-sub 15pin x 1.
Output connector: a. USB down stream x 4.
Display data channel: DDC2B. (Appendix B)
Signal frequency range: a. Horizontal:
Resolution: 1600x1200. (UXGA)
Power supply: AC Input Range: AC 90 to 264V, 50/60Hz ± 3Hz, 1.5A.
Power Consumption:
a. Panel size: 20.1-inch (viewable).
b. Driver element: a - Si TFT active matrix.
c. Effective display area: 408.0 (H) X 306.0 (V) mm.
d. Pixel pitch: 0.255 (H) X 0.255 (V) mm.
e. Max. resolution: UXGA (1600X1200 pixels).
f. Display color: 16.7M colors (R, G, B 8-bit data).
g. Response time (ms)(typical):
h. Color Gamut:
25 ms => LM201U03
16 ms => LM201U04
60% => LM201U03
72% => LM201U04
i. Color filter arrangement: R / G / B vertical stripe.
j. Black light: Edge – light type with 6CCFLs.
k. Contrast ratio:
350:1 => LM201U03
400:1 => LM201U04
l. Luminance: 250cd/m2 (Typical).
m. Luminance variation: 1.54 (MAX.).
n. Viewing angle (CR >10): Horizontal: 170
o
, Vertical: 170o.
b. Digital R /G / B DVI rev. 1.0 (TMDS single link)
c. H & V separate Sync: TTL level; Polarity: Positive or Negative.
d. H & V composite Sync: TTL level; Polarity: Positive or Negative.
e. SOG (Sync level 0.3Vp-p).
b. Digital DVI-I 29 pin x 1. (Analog + Digital)
c. USB up stream x1.
2.1.2 Luminance test.
Input1600x1200 / 60Hz & full white pattern at 100IRE, adjust brightness 100%, contrast 70%.
Color temperature x, y value
9300°K x=0.283 , y=0.298
6500°K x=0.313 , y=0.329
5400°K x=0.335 , y=0.350
5000°K x=0.346 , y=0.359
a. Height: 480.55mm.
b. Width: 448.00mm.
c. Depth: 266.65mm.
a. Net weight: 8.5kg. Weight:
b. Gross weight: 11.2kg.
a. Tilt: +25o ~ -5o.
b. Swivel:
c. Height adjust: 110mm.
d. Pivot: 90
± 45
o
.
o
.
a. Height: 494mm.
b. Width: 345mm.
c. Depth: 560mm.
User guide (English).
CD ROM.
Warranty card.
HD15 - HD15 cable.
DVI (D) – DVI (D) cable.
USB Cable (A type to B type)
Portrait Software CD
a. General specification:
LCD panel suppliers: Samsung: LTM213U4-L01.
LCD panel specification:
Input signals: a. Analog R / G / B (0.7Vp-p/75 ohm) Positive.
Input connector: a. Analog D-sub 15pin x 1.
Output connector: a. USB down stream x 4.
Display data channel: DDC2B. (Appendix B)
Signal frequency range: a. Horizontal:
Resolution: 1600x1200. (UXGA)
Power supply: AC Input Range: AC 90 to 264V, 50/60Hz ± 3Hz, 1.5A.
Power Consumption:
a. Panel size: 21.3-inch (viewable).
b. Driver element: a - Si TFT active matrix.
c. Effective display area: 432.0 (H) X 324.0 (V) mm.
d. Pixel pitch: 0.27 (H) X 0.27 (V) mm.
e. Max. resolution: UXGA (1600X1280 pixels).
f. Display color: 16.7M colors (R, G, B 8-bit data).
g. Response time: Tr 15ms / Tf 10ms. (Typical)
h. Color filter arrangement: R / G / B vertical stripe.
i. Black light: Edge – light type with 6CCFLs.
j. Contrast ratio: 300:1
k. Luminance: 250cd/m2 (Typical).
l. Luminance variation: 25% (MAX.). (Note.1)
m. Viewing angle (CR >10): Horizontal: 170
o
, Vertical: 170o.
b. Digital R /G / B DVI rev. 1.0 (TMDS single link)
c. H & V separate Sync: TTL level; Polarity: Positive or Negative.
d. H & V composite Sync: TTL level; Polarity: Positive or Negative.
e. SOG (Sync level 0.3Vp-p).
b. Digital DVI-I 29 pin x 1. (Analog + Digital)
c. USB up stream x1.
These functions are not available in Digital mode; the setting is shaded and can't be selected.
When auto tuning, the image should not be blanking.
3
These functions are not available in 1600x1200 mode, the setting is shaded and can't be selected.
*
4
When the input signal is 4:3, the “Fill Aspect ratio” function is the size same as “Fill Screen”.
*
2
2
(H. Position, V. Position), H. Size*2, Fine Tune*
3
, Scaling*3 (Fill Screen, Fill Aspect Ratio*
4
, 1:1).
2
,
ViewSonic Corporation
!
6
!
Confidential –DoNotCopy
VP201b/s-1
VP211b-1
4. Factory preset.
4.1 Special key (Hot key): Hold the following keys while powering on:
[1]. Main Menu.
[2]. Select next input. (Sequence: D-SUB → DVI-A → DVI-D)
[UP] or [DOWN] arrow. To immediately activate Contrast menu. It should be change to Brightness
[UP] + [DOWN] arrows. Recall Contrast or Brightness while in the Contrast or Brightness adjustment,
[1] + [2]. Toggle 720x400 and 640x400 mode when input 720x400 or 640x400 mode.
[1] + [UP] + [DOWN]. White Balance. (keep press 5 seconds)
Timing of input signals, Input level specification.
A. Input signal:
a. Analog R / G / B (0.7Vp-p/75 ohm) Positive.
b. Digital R /G / B DVI rev. 1.0 (TMDS single link)
c. H & V separate Sync: TTL level; Polarity: Positive or Negative.
d. H & V composite Sync: TTL level; Polarity: Positive or Negative.
B. Input signal connector:
a. Analog video input:
Pin Pin assignment Pin Pin assignment
1 Red video 9 +5V for DDC
2 Green video 10 GND
3 Blue video 11 GND
4 GND 12 DDC SDA
5 GND 13 H SYNC
6 Red video return 14 V SYNC
7 Green video return 15 DDC SCL
8 Blue video return
Pin5: For cable connection detect.
b. Digital video input:
Pin Pin assignment Pin Pin assignment PinPin assignment
1 TMDS data 2- 9 TMDS data 1- 17 TMDS data 02 TMDS data 2+ 10 TMDS data 1+ 18 TMDS data 0+
3 TMDS data 2 shield 11 TMDS data 1 shield 19 TMDS data 0 shield
4 NC 12 NC 20 NC
5 NC 13 NC 21 NC
6 DDC clock 14 +5V power 22 TMDS clock shield
7 DDC data 15 GND 23 TMDS clock +
8 Analog V-SYNC 16 Hot Plug Detect 24 TMDS clock C1 Analog R C2 Analog G C3 Analog B
C4 Analog H-SYNC C5 Analog Ground