Viewsonic VG150-1 Service Bulletin 002

ViewSonic® Corporation

381 Brea Canyon Road • Walnut, CA 91789 • Tel: [phone] • Fax: [phone]

			Service Bulletin
			SB # VG150_SB_002
	To : Authorized Service Providers	Issue Date: September 25, 2000		ECO # : 695(new)-3
	Model # : VG150		Cut-in S/N :
			S/N Range :
			Target Date : September 18, 2000

Subject: Countermeasure to prevent pinching of wires with plastic housing of LCD panel.

Prepared By :

Tommy Jue

Approved By :

Richard Tanimoto

Purpose:

Countermeasure to prevent pinching of wires with plastic housing for LCD panel. The wires are re-routed to prevent this problem

	Service Bulletin Application:			ASP Distribution:
	Recall.				- USA ASP
	Service Inventory, Repairs In-Process & No Problem Found (NPF).				- Canada ASP
	Repairs In-Process & NPF.				- Latin America ASP
	Repairs In-Process.				- 3rd Party ASP
	Technician judgement for unit under service (symptomatic).				- Supplier Service ASP
					- Limited ASP
					- ViewSonic Internal
					- Complete ASP Listing
	Change(s)/Countermeasure(s):
	Part Location	Part Description	Part Number	Repair Action		Comment	Failure	Repair
							Code	Code
						See photos
				Replace original ferrite		illustrating the
						problem and
		Wire clip	PL-CL-0710-0030	core wire saddle with new			GOA	D5
						countermeasure.
				wire clip
						Note wire routing
						layout.

*Note: Repair action(s) that consist of the countermeasures contained in this or any other service bulletin(s), shall use D5 as the repair code. All other repair action(s) outside of the service bulletin(s) shall use the appropriate repair codes contained in the Repair and Defect Codes Handbook (i.e. C7).

Pinched wires.

Wire clip

Ferrite core saddle

Cut-away of plastic housing showing the wires pinched by housing leading to “no video” condition.

New method of wire routing with plastic housing cut-away.

Please contact the Quality Assurance Department at [phone] for further information.

FORM: SERVBULL_4.19_V5

Page 1 of 1

7/3/2000

Ref.