16. Avoid exposing the digital photo frame to direct sunlight. Adjust the angle to reduce glare.
17. Careful attention should always be paid when moving the digital photo frame.
18. Make sure the place where the digital photo frame is placed is clean and dry.
19. If there is smoke, a strange smell or an abnormal noise, immediately turn off the digital photo frame and contact your dealer or ViewSonic.
20. Do not rub or apply pressure to the LCD panel. This may cause irreparable damage to the screen.
ViewSonicVFM835-52G/VFM835-72G
ENGLISH
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the
Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed
to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
SubstanceProposed Maximum ConcentrationActual Concentration
Lead (Pb)0.1%< 0.1%
Mercury (Hg)0.1%< 0.1%
Cadmium (Cd)0.01%< 0.01%
6+
Hexavalent Chromium (Cr
Polybrominated biphenyls (PBB)0.1%< 0.1%
Polybrominated diphenyl ethers (PBDE)0.1%< 0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a
cooper alloy containing up to 4% lead by weight.
notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission
from ViewSonic Corporation.
For Your Records
Product Name:
VFM835-52G/VFM835-72G
ViewSonic Digital Photo Frame
Model Number:
Document Number:
Serial Number:
Purchase Date:
VS12674
VFM835-52G_72G_UG_ENG Rev. 1A 07-28-09
_______________________________________
_______________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life.
Your local waste disposal company may provide information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with environmental laws of your location.
Main Features .........................................................................................................................................................................................2
Controls and Connections ....................................................................................................................................................................3
Attaching the mount .............................................................................................................................................................................6
Connecting to the power ......................................................................................................................................................................7
Copy files from computer .....................................................................................................................................................................8
Main menu..........................................................................................................................................................................................10
Browsing a single photo .....................................................................................................................................................................12
Playing a slideshow............................................................................................................................................................................ 12
Using OSD menu ...............................................................................................................................................................................13
Listening to Music ................................................................................................................................................................................14
Setting time & date .............................................................................................................................................................................20
Setting Auto start ................................................................................................................................................................................20
Setting auto power on/off ...................................................................................................................................................................21
Thank you for purchasing this Digital Photo Frame.
This Digital Photo Frame is compatible with SD, MMC and MS memory card formats, which enables you to view digital photo directly from your
camera’s memory card.
This manual contains important safety information and operation instructions, so please read all the instructions carefully before using the Digital
Photo Frame and keeps it for future reference.
We have done our best to produce a complete and accurate manual; however, we cannot ensure there are no errors
or omissions. We also have no responsibility for damages or loss of data caused by improper operation.
The instruction manual is subject to change for improvement without notice.
Trademarks and trade names used in this user’s manual are owned by their respective companies or organizations.
ViewSonicVFM835-52G/VFM835-72G
1
Main Features
y 8 inch Digital TFT LCD: 800*600 4:3
y Swift touch keys with blue backlight
y Decorative appearance, good quality
y Displays digital photos (JPEG) without a computer
y Slide show with background music and multiple transition effects
y Playback of MP3 music files
y Supports MPEG-1, MPEG-4 and M-JPEG video formats
y Clock and Calendar display
y Alarm setting
y Auto power On/Off
y Compatible with SD/MMC/MS memory cards
y USB Host for connecting to the USB mass storage
y Controlled either by 7 touch keys on the front panel of the unit, or by infrared remote control
ViewSonicVFM835-52G/VFM835-72G
2
Controls and Connections
1. SD/MMC/MS-card slot
2. USB HOST
3. 5V 2A DC Input socket
4. Adjustable mounting
5. Infrared sensor
6. [X] Play/Pause/Confirm button
7. [M] Menu touch key; open OSD menu
8. [2] Exit touch key
9. [g] Left touch key
10. [h] Right touch key
11. [i] Up touch key
12. [j] Down touch key
ViewSonicVFM835-52G/VFM835-72G
3
Remote Control
1
2
a
3
_
4
MENU
5
b
6
7
8
4:3/16:9
9
VOL+
10
SETUP
11
OK
12
`
13
OSD
14
2
15
16
17
18
VOL-
ViewSonicVFM835-52G/VFM835-72G
Turn on/off the unit.
Move the cursor up.
Move the cursor left; Select previous photo while viewing photos.
Return to main menu.
Move the cursor down.
Select previous photo while viewing photos or switch to previous page in
thumbnail mode. Fast rewind within a track/video in music/video mode.
Zoom in a photo or a video scene.
To set photo to display on full screen or fit to screen if its resolution is higher
than resolution of the screen.
Increase the volume.
Enter setup menu.
Play/Pause/Confirm.
Move the cursor right; Select next photo while viewing photos.
Open or exit the OSD menu.
Return to previous menu.
Select next photo while viewing photos or switch to next page in thumbnail
mode. Fast forward within a track/video in music/video mode.
Start a slide show with background music.
Start or stop playing background music during a slideshow.
Decrease the volume.
4
Battery installation for the Remote Control
y Remove the insulating mylar strip from the battery if the battery is being used for the first time, it is located at the bottom back side of the
remote control.
y If the remote control unit fails to work even when it is operated near the unit, replace the battery.
1. Press and hold the battery release tab in the direction of arrown.
2. Pull out the battery holder completely in the direction of arrow o as shown in the left.
3. Remove the old battery, and place a new battery in the holder.
4. Push the holder back into the remote control.
Note: Use a 3V lithium battery (No. CR2025 or equivalent)
Caution: Be careful when you press the slot of the battery compartment with your fingernails only as this might break them.
ViewSonicVFM835-52G/VFM835-72G
5
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.