Viewsonic VE710S-B2 Service Bulletin 013

ViewSonic® Corporation

381 Brea Canyon Road • Walnut, CA 91789 • Tel: [phone] • Fax: [phone]

To : Authorized Service Providers
Model # : VE710b-2M/G; VE710s-2

(VS10047)

Subject/Symptom: Service notification to add insulator tape between power board & FFC to avoid FFC

damage.

Prepared By :

Daniel Lee

Purpose: Add insulator tape between power board & FFC (flat cable) to avoid FFC (flat cable) damage due to

sharp pin of R830.

Service Bulletin Application: ASP Distribution:

Recall. - USA ASP
Service Inventory, Repairs In-Process & No Problem Found (NPF). - Canada ASP
Repairs In-Process & NPF. - Latin America ASP
Repairs In-Process. - 3rd Party ASP
Technician judgement for unit under service (symptomatic). - Supplier Service ASP

Change(s)/Countermeasure(s):

Part Location Part Description Part Number Repair Action Comment Failure

5F15

*Note: Repair action(s) that consist of the countermeasures contained in this or any other service bulletin(s), shall use D5 as the repair code. All other repair
action(s) outside of the service bulletin(s) shall use the appropriate repair codes contained in the Repair and Defect Codes Handbook (i.e. C7).

Insulator

( 24*31*0.45 T4000)

Service Bulletin

SB # VE710-2_Series_SB_013

Issue Date:

Cut-in S/N: VE710b-2: P1Q0518B0001

S/N Range:
Target Date:

Approved By :

M-00003266 Add Insulator to the circuit See photo. G0A D5

May 27, 2005 ECO # : 5408-2

VE710s-2: P1R0519B0001

Ivan Chan

- Limited ASP

- ViewSonic Internal

- Complete ASP Listing

Code

Repair

Code

Please contact the Quality Assurance Department at (886)-2-2246-3456 for further information.

4.19: Form, Service Bulletin 10/30/2002

SERV-BULL-V1 Page 1 of 1