Viewsonic VE710B-1 Service Manual 1c

Service Manual

ViewSonic VE710b/s-1

Model No. VLCDS27998-2W/-1W

17” Color TFT LCD Display

ViewSonic

(VE710b/s-1_SM_736 Rev. 1c Apr. 2005)



381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583

Copyright

Copyright reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation.

Disclaimer

ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes.

Trademarks

Optiquest is a registered trademark of ViewSonic Corporation. ViewSonic is a registered trademark of ViewSonic Corporation. All other trademarks used within this document are the property of their respective owners.

¤

Revision History

Documents Number

DCN Number ECR Number

1a

1b

1c

25/12/03

06/07/04

/19/05

04

3742

4527 5244

4342 5218

To solve CPT panel shortage,

phase in QDI panel as the 2nd source

Panel change from QDI QD17EL07 REV.03 25ms to QD17EL0709 8ms

Description of Changes EditorRevision SM Editing Date

Initial Release

A. Lu

A .Lu

ViewSonic Corporation Confidential

i

-

Do Not Copy VE710b/s-1

TABLE OF CONTENTS

1. Precautions and Safety Notices

2. Specification

3. Front Panel Function Control Description

4. Circuit Description

5. Adjustment Procedure

6. Troubleshooting Flow Chart

7. Recommended Spare Parts List

8. Exploded Diagram and Exploded Parts List

9. Block Diagram

10. Schematic Diagrams

11. PCB Layout Diagrams

1

5 8

14 24

43

45 52 61 63

69

ViewSonic Corporation Confidential

ii

-

Do Not Copy VE710b/s-1

1. Precautions and Safety Notices

1. Appropriate Operation

(1) Turn off the product before cleaning. (2) Use only a dry soft cloth when cleaning the LCD panel surface. (3) Use a soft cloth soaked with mild detergent to clean the display housing. (4) Use only a high quality, safety approved AC/DC power cord. (5) Disconnect the power plug from the AC outlet if the product will not be used for a long period of time. (6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off. (7) Do not touch the LCD panel surface with sharp or hard objects. (8) Do not place heavy objects on the LCD display, video cable, or power cord. (9) Do not use abrasive cleaners, waxes or solvents for your cleaning. (10) Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

- Areas containing excessive dust and dirt.

- Near any appliance generating a strong magnetic field.

- In direct sunlight.

2. Caution

No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar

with all of the following safety checks and servicing guidelines.

3. Safety Check

Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is

exposed in such areas as the associated transformer circuits.

4. LCD Module Handling Precautions

4.1 Handling Precautions

(1) Since front polarizer is easily damaged, pay attention not to scratch it. (2) Be sure to turn off power supply when connecting or disconnecting input connector. (3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots. (4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. (6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling. (7) Do not open or modify the Module Assembly. (8) Do not press the reflector sheet at the back of the module in any direction. (9) In the event that a Module must be put back into the packing container slot after it was taken out of the

container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged.

(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface

Connector of the TFT Module.

ViewSonic Corporation Confidential

1

-

Do Not Copy VE710b/s-1

(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or

bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.

(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local

ordinances or regulations for disposal.

(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module

should be supplied with power that complies with the requirements of Limited Power Source (IEC60950 or UL1950), or an exemption should be applied for.

(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950

or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.

ViewSonic Corporation Confidential

2

-

Do Not Copy VE710b/s-1

5. Handling Methods

Correct methods : Incorrect Methods :

Only touch the metal frame of the panel or the front cover of the monitor. Do not touch the surface of the polarizer .

If the surface of the panel is pressed by fingers, this may cause "MURA."

Take out the monitor by grasping the cushion.

If the monitor is removed by grasping the LCD

panel, that may cause "MURA."

ViewSonic Corporation Confidential

3

-

Do Not Copy VE710b/s-1

Correct methods : Incorrect Methods :

Place the monitor on a clean & soft foam pad .

If the monitor is placed on foreign objects,

that could scratch the surface of the panel.

ViewSonic Corporation Confidential

4

-

Do Not Copy VE710b/s-1

2. Specification

• General Specifications

Test Resolution & Frequency 1280 x 1024 @ 60Hz Test Image Size Full Size Contrast and Brightness Controls Factory Default: Contrast = 70%, Brightness =

• Video Interface

Analog Input Connector DB-15 (Analog) Video Cable Strain Relief Equal to twice the weight of the monitor for five

Video Cable Connector DB-15 Pinout Compliant DDC 2B. Video Signals Video RGB (Analog) Video Impedance 75 Ohms (Analog) Maximum PC Video Signal 950 mV with no damage to monitor Maximum Mac Video Signal 1250 mV with no damage to monitor Sync Signals TTL DDC 1/2B Compliant with Revision 1.3 Video Compatibility Shall be compatible with all PC type computers,

Resolution Compatibility 640 x 350, 640 x 480, 720 x 400 (640 x 400), 800 x

Exclusions Not compatible with interlaced video.

• Power Supply

Internal Power Supply Part Number: ADP-40AFB Input Voltage Range 90 TO 264 VAC Input Frequency Range 47.5 TO 63 HERTZ Short Circuit Protection Output can be shorted without damage. Over Current Protection 4.5 A typical at 12 VDC Leakage Current 3.5mA (Max) at 254VAC / 60Hz EFFICIENCY 70 % typical at 115VAC Full Load Fuse Internal and not user replaceable Power Dissipation 35 Watts (typ) Max Input AC Current 1.2 Arms @ 90VAC, 0.8 Arms @180VAC

100%

minutes.

Macintosh computers, and after market video cards.

600, 832 x 624, 1024 x 768, 1280 x 720, 1280 x 1024

ViewSonic Corporation Confidential

5

-

Do Not Copy VE710b/s-1

• Horizontal / Vertical Frequency

Horizontal Frequency 30 – 80 KHZ Vertical Refresh Rate 50 –85 HZ. Maximum Pixel Clock 135 MHz Sync Polarity Independent of sync polarity.

Primary Presets

Primary Preset 1280 x 1024 @ 60Hz

Look up table timing

<<Analog>>

1. 640 x 350 @ 70Hz, 31.5kHz

2. 640 x 480 @ 60Hz, 31.5kHz

3. 640 x 480 @ 67Hz, 35.0kHz

4. 640 x 480 @ 75Hz, 37.5kHz

5. 640 x 480 @ 72Hz, 37.9kHz

6. 640 x 480 @ 85Hz, 43.27kHz

7. 720 x 400 @ 70Hz, 31.5kHz

8. 800 x 600 @ 56Hz, 35.1kHz

9. 800 x 600 @ 60Hz, 37.9kHz

10. 800 x 600 @ 75Hz, 46.9kHz

11. 800 x 600 @ 72Hz, 48.1kHz

12. 800 x 600 @ 85Hz, 53.7kHz

13. 832 x 624 @ 75Hz, 49.7kHz

14. 1024 x 768 @ 60Hz, 48.4kHz

15. 1024 x 768 @ 70Hz, 56.5kHz

16. 1024 x 768 @ 72Hz, 58.1kHz

17. 1024 x 768 @ 75Hz, 60.0kHz

18. 1024 x 768 @ 85Hz, 68.67kHz

19. 1280 x 1024 @ 60Hz, 63.4kHz

20. 1280 x 1024 @ 75Hz, 79.97kHz

21. 1280x720 @ 60Hz, 45kHz (HDTV) Changing Modes Maximum Mode Change Blank Time, for image stability. Note:

1) Excluding “Auto Adjust” time

2) Under DOS mode (640 x 350, 720 x 400 & 640 x

400), there is no “Auto Adjust” feature.

3) The monitor needs to do “Auto Adjust” the first time a new mode is detected. Mode Change Image The image shall blank while the monitor changes

3 seconds (Max) 1 seconds (Typ) for recognized timings 1-2 seconds (Typ) for unrecognized timing .

modes.

ViewSonic Corporation Confidential

6

-

Do Not Copy VE710b/s-1

• LCD Panel

st

1

Source Panel QD17EL0709 Type Normally white, TN, Optical compensation film Active Size 337.920 (H) x 270.336 (V) Pixel Arrangement RGB Vertical Stripe Pixel Pitch 0.264 mm GLASS TREATMENT Anti Glare # OF BACKLIGHTS 4 CCFL edge-light (2 top / 2 bottom) BACKLIGHT LIFE 50,000 Hours (Typ) / 40,000 Hours (Min) Luminance – Condition: CT = 6500K, Contrast = Max, Brightness = Max Brightness Uniformity 75 % Entire Area (minimum) Contrast Ratio 500:1 (Typ), 300:1 (Min) Color Depth 16 million colors (6 bit panel) Viewing Angle (Horizontal) 140 deg @ CR>10, 160 deg @ CR>5 VIEWING ANGLE (VERTICAL) 125 deg @ CR>10, 145 deg @ CR>5 Response Time 10%-90% @ Ta=25°C Panel Defects Please see Panel Quality Specifications.

• Mechanical

300 cd/m2 (Typ after 30 minute warm up) 240 cd/m2 (Min after 30 minute warm up)

8 ms (Tr= 6 ms, Tf = 2 ms) (Typ) TBD ms (Tr= TBD ms, Tf = TBD ms) (Max)

Dimensions (Base attached unless otherwise specified)

Width 377.6 mm Height 374.0 mm Depth 195.6 mm Depth (Head Only) 55.0 mm Monitor Weight 4.1 kg / 9.0 lbs Packaging Specification Width 450 mm Height 522 mm Depth 135 mm Gross Weight 5.2 kg (11.45 lb) # units per Pallet 36/72 (air/sea) 20’/40’ Container Loading, Palletized 720/1728 pieces

Ergonomics

Tilt Up 20 degrees minimum Tilt Down -5 degrees Swivel Right 0 degrees Swivel Left 0 degrees Height Adjust 0 mm Pivot 0 degrees (Clockwise)

• Environmental Conditions

Operating Temperature 0°C to +40°C Storage Temperature -20°C to +60°C Operating Relative Humidity 20% to 90% RH Non-Condensing Storage Relative Humidity 5% to 90% RH Non-Condensing Operating Altitude 0 to +3,000 meters Storage Altitude 0 to +12,000 meters

ViewSonic Corporation Confidential

7

-

Do Not Copy VE710b/s-1

3. Front Panel Function Control Description

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page.

Main Menu With OnView controls

Front Control Panel shown below in detail

®

Displays the control screen for the highlighted control.

Also toggles between two controls on some screens.

Also a shortcut to Auto Image Adjust.

Displays the Main Menu or exits the control screen and saves adjustments.

Power light Green = ON Orange = Power Saving

Power On/Off

Scrolls through menu options and adjusts the displayed control.

Also a shortcut to display the Contrast adjustment control screen.

ViewSonic Corporation Confidential

8

-

Do Not Copy VE710b/s-1

Do the following to adjust the screen image:

1

To display the Main Menu, press button [1].

Main Menu

AUTO

SET

?

Auto Adjust

Contrast/Brightness

Color Adjust

Information

i

Image Adjust

Setup Menu

Memory Recall

1:EXIT 2:SELECT

NOTE: All OnView menus and adjustment screens disappear automatically after about 15

seconds. This is adjustable through the OSD timeout setting in the setup menu.

2. To select a control to be adjusted, press SorTto scroll up or down in the Main Menu.

3. After the desired control is selected, press button [2]. A control screen like the one shown below

appears.

Contrast

The line at the bottom of the screen shows the

1:EXIT 2: Brightness

4

To adjust the control, press the upIor downJbuttons.

5

To save the adjustments and exit the menu, press button [1] twice.

current functions of buttons 1 and 2: Exit or select the Brightness control.

Thefollowing tips may help you optimizeyour display:

• Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60 Hz to the LCD dislay. (Look for instructions on “changing the refresh rate” in your graphic card's user guide.)

• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible

. (The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD dislay.)

ViewSonic Corporation Confidential

9

-

Do Not Copy VE710b/s-1

Main Menu Controls

Adjust the menu items shown below by using the up Iand down Jbuttons.

Control Explanation

Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image.

NOTE:

1. Auto Image Adjust works with most common video cards. If this function

does not work on your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value.

2. The Auto Image Adjust and most Manual Image Adjust functions are not available for DVI input.

Contrast

adjusts the difference between the image background

(black level) and the foreground (white level).

Brightness

Color Adjust provides several color adjustment modes: preset color

temperatures and RGB which allows adjustment of red (R), green (G), and blue

B) separately. The factory setting for this product is 6500K (6500 Kelvin).

sRGB-RGB is quickly becoming the industry standard for color management,

with support being included in many of the latest applications. Enabling this setting allows the LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled.

adjusts background black level of the screen image.

9300K-Adds blue to the screen image for cooler white (used in most office

settings with fluorescent lighting).

6500K-Adds red to the screen image for warmer white and richer red.

5400K-Adds green to the screen image for a darker color.

ViewSonic Corporation Confidential

10

-

Do Not Copy VE710b/s-1

Control Explanation

User Color Individual adjustments for red (R), green (G), and blue (B).

1. To select color (R, G or B) press button [2].

2. To adjust selected color, pressSorT.

3. When you are finished making all color adjustments, press

button [1] twice.

i

Information displays the timing mode (video signal input) coming from the graphics card in your computer, the LCD model number, the serial number, and

the ViewSonic website URL. See your graphic card's user guide for instructions

on changing the resolution and refresh rate (vertical frequency).

NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.

Image Adjust

H./V. Position

H. Size

Fine Tune

Sharpness

1:EXIT 2:SELECT

The Image Adjust controls are explained below:

H./V. Position

adjusts horizontal and vertical position of the screen image. You can toggle between Horizontal and Vertical by pressing button [2]. Horizontal moves the screen image to the left or to the right. Vertical moves the screen image up and down.

H. Size

NOTE:

(Horizontal Size) adjusts the width of the screen image.

Vertical size is automatic with your LCD dislay.

ViewSonic Corporation Confidential

11

-

Do Not Copy VE710b/s-1

Control

Explanation

Fine Tune sharpens focus by aligning the illuminated text and/

or graphic characters.

NOTE: Try the Auto Adjust (see page 9) before using the Fine

Tune control.

?

Sharpness

Setup Menu displays the menu shown below.

adjusts the clarity and focus of the screen image.

The Setup Menu controls are explained below.

L

anguage

Select allows you to choose the language used in

the menus and control screens.

OSD

Resolution Notice

OSD Position

advises the optimal resolution to use.

allows you to move the on-screen display menus

and control screens.

OSD Timeout

sets the length of time an on-screen display screen is displayed. For example, with a “15 second” setting, if a control is not pushed within 15 seconds, the display screen disappears.

ViewSonic Corporation Confidential

12

-

Do Not Copy VE710b/s-1

Control Explanation

OSD

OSD Background

allows you to turn the On-Screen display background on or off. This means that while making adjustments from the OSD control screens you can also view open software applications, or the Windows desktop.

Memory Recall

returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed in this user guide.

ViewSonic Corporation Confidential

13

-

Do Not Copy VE710b/s-1

4. Circuit Description

1. Outline

1.1 Buttons on the front panel: Power On/Off button, button 2 (ENTER / INPUT SELECT), up arrow

button, down arrow button, button 1 (MENU).

1.2 D-sub 15-pin connector, DVI-I connector and AC-IN jack are located on the back side of the cabinet.

1.3 OSD menu includes the following function;

Auto Image Adjust (only active under analog input) Contrast/Brightness Audio Adjust Color Adjust Information Manual Image Adjust Setup Menu Memory Recall

1.4 Contrast and Brightness can be directly controlled with UP / DOWN buttons.

2. Connectors

2.1 AC inlet: CEE22 type connector

2.2 Video signal connector for analog input: 15P Mini D-Sub

162738495

16 17

11

12

13

14

15

10

CN6

PIN MNEMONIC SIGNAL

DB15HD

1 RV Red Video 2 GV Green Video

3 BV Blue Video 4 NC None

5 GND Ground (DDC

6 RG Red GND 7 GG Green GND 8 BG Blue GND 9 +5V +5V (for DDC) 10 SG Sync GND 11 NC None 12 SDA DDC Data 13 HS Horizontal Sync 14 VS Vertical Sync 15 SCL DDC Clock

return)

ViewSonic Corporation Confidential

14

-

Do Not Copy VE710b/s-1

3. ELECTRICAL SPECIFICATIONS

3.1 Standard conditions

Display Area 338x 270 mm

Video Signal 0.7Vpp

Contrast 70%

Brightness Max.

Ambient 20 +/- 5 °C Input AC

Warming up > 30 min

Display 1280 x 1024

3.2 POWER

3.2.1 Power supply

Input voltage 100~240Vac Power frequency 50~60Hz

Input current Inrush current

90

<1.5Arms@90Vac

<0.75Arms@240Vac

A(Max) at 230Vac(cold start)

Power consumption 50W(typical);40Watts(Max)

3.2.2 Power Management

Output

State Power Indicator

@0-3.0A load 12Vdc +/-5%

On 45Watts Green Standby < 1Watts Amber Off <1Watts Off

3.3 Acceptable timing

If the timing is within following specification, this LCD display can automatically function with a certain

position.

Horizontal: Sync frequency: 30~81 kHz

Vertical: Sync frequency: 56~85Hz (1280x1024,75Hz)

3.4 Signal level and input impedance

3.4.1 Video Signal level: 0.7Vp-p Video signal.

3.4.2 Sync Signal level

H/V Separate: TTL level

3.4.3 Input impedance

Analog video input: 75 ohm Sync input: > 1 k ohm

4. SIGNAL CABLE: Signal cable with Mini D-Sub 15P connectors at both ends. Length: 1.8 meter.

ViewSonic Corporation Confidential

15

-

Do Not Copy VE710b/s-1

5. EDID data

VE710s EDID(QDI panel)

______________________________________________________________________

EDID Block 0, Bytes 0-127

128 BYTES OF EDID CODE:

0 1 2 3 4 5 6 7 8 9

________________________________________

0 | 00 FF FF FF FF FF FF 00 5A 63

10 | 18 F5 01 01 01 01 01 0F 01 03

20 | 18 22 1B 78 2E 8A 15 A3 58 49

30 | 9D 24 16 50 54 BF EF 80 81 80

40 | 81 40 71 4F 01 01 01 01 01 01

50 | 01 01 01 01 30 2A 00 98 51 00

60 | 2A 40 30 70 13 00 52 0E 11 00

70 | 00 1E 00 00 00 FF 00 41 33 33

80 | 30 35 30 31 30 30 30 30 31 0A

90 | 00 00 00 FD 00 32 4B 1E 50 0E

100 | 00 0A 20 20 20 20 20 20 00 00

110 | 00 FC 00 56 45 37 31 30 73 0A

120 | 20 20 20 20 20 20 00 8F

______________________________________________________________________

(08-09) ID Manufacturer Name = VSC (11-10) Product ID Code = F518 (12-15) Last 5 Digits of Serial Number = Not Used (16) Week of Manufacture = 01 (17) Year of Manufacture = 2005 (10-17) Complete Serial Number = See Descriptor Block (18) EDID Version Number = 1 (19) EDID Revision Number = 3 (20) VIDEO INPUT DEFINITION:

Analog Signal

0.700, 0.300 (1.000 Vp-p)

Blank-to-Black Setup, Separate Syncs

(21) Maximum Horizontal Image Size = 340 mm (22) Maximum Vertical Image Size = 270 mm (23) Display Gamma = 2.20 (24) Power Management and Supported Feature(s):

Active Off/Very Low Power, Standard Default Color Space,

Preferred Timing Mode

Display Type = R/G/B Color

(25-34) CHROMA INFO:

Red X - 0.639 Green X - 0.287 Blue X - 0.141 White X - 0.313

Red Y - 0.344 Green Y - 0.615 Blue Y - 0.087 White Y - 0.329

Time: 09:10:39

Date: Wed Jan 19, 2005

VIEWSONIC CORPORATION

EDID Version # 1, Revision # 3

DDCTest For: ViewSonic VE710s

ViewSonic Corporation Confidential

16

-

Do Not Copy VE710b/s-1

(35) ESTABLISHED TIMING I:

720 X 400 @ 70Hz (IBM,VGA)

640 X 480 @ 60Hz (IBM,VGA)

640 X 480 @ 67Hz (Apple,Mac II)

640 X 480 @ 72Hz (VESA)

640 X 480 @ 75Hz (VESA)

800 X 600 @ 56Hz (VESA)

800 X 600 @ 60Hz (VESA)

(36) ESTABLISHED TIMING II:

800 X 600 @ 72Hz (VESA)

800 X 600 @ 75Hz (VESA)

832 X 624 @ 75Hz (Apple,Mac II)

1024 X 768 @ 60Hz (VESA)

1024 X 768 @ 70Hz (VESA)

1024 X 768 @ 75Hz (VESA)

1280 X 1024 @ 75Hz (VESA)

(37) Manufacturer's Reserved Timing:

1152 X 870 @ 75Hz (Apple,Mac II)

(38-53) Standard Timing Identification:

1280 X 1024 @60Hz

1280 X 960 @60Hz

1152 X 864 @75Hz

Not Used

Not Used ______________________________________________________________________

(54-71) Detailed Timing / Descriptor Block 1:

1280x1024 Pixel Clock: 108.00 MHz ______________________________________________________________________

Horizontal Image Size: 338 mm Vertical Image Size: 270 mm

Refreshed Mode: Non-Interlaced Normal Display - No Stereo

Horizontal:

Active Time: 1280 pixels Blanking Time: 408 pixels

Sync Offset: 48 pixels Sync Pulse Width: 112 pixels

Border: 0 pixels Frequency: 63.98 KHz

Vertical:

Active Time: 1024 lines Blanking Time: 42 lines

Sync Offset: 1 lines Sync Pulse Width: 3 lines

Border: 0 lines Frequency: 60.02 Hz

Digital Separate, Horizontal Polarity (+) Vertical Polarity (+)

______________________________________________________________________

(72-89) Detailed Timing / Descriptor Block 2:

Monitor Serial Number:

A33050100001 _________________________________________________________

ViewSonic Corporation Confidential

17

-

Do Not Copy VE710b/s-1

(90-107) Detailed Timing / Descriptor Block 3:

Monitor Range Limits:

Min Vertical Freq - 50 Hz

Max Vertical Freq - 75 Hz

Min Horiz. Freq - 30 KHz

Max Horiz. Freq - 80 KHz

Pixel Clock - 140 MHz

Secondary GTF - Not Supported ______________________________________________________________________

(108-125) Detailed Timing / Descriptor Block 4:

Monitor Name:

VE710s

(126) No Extension EDID Block(s) (127) CheckSum OK

VE710b EDID(QDI panel)

Time: 09:10:09

Date: Wed Jan 19, 2005 ______________________________________________________________________

VIEWSONIC CORPORATION

EDID Version # 1, Revision # 3

DDCTest For: ViewSonic VE710b ______________________________________________________________________

EDID Block 0, Bytes 0-127

128 BYTES OF EDID CODE:

0 1 2 3 4 5 6 7 8 9

________________________________________

0 | 00 FF FF FF FF FF FF 00 5A 63

10 | 18 F6 01 01 01 01 01 0F 01 03

20 | 18 22 1B 78 2E 8A 15 A3 58 49

30 | 9D 24 16 50 54 BF EF 80 81 80

40 | 81 40 71 4F 01 01 01 01 01 01

50 | 01 01 01 01 30 2A 00 98 51 00

60 | 2A 40 30 70 13 00 52 0E 11 00

70 | 00 1E 00 00 00 FF 00 41 33 34

80 | 30 35 30 31 30 30 30 30 31 0A

90 | 00 00 00 FD 00 32 4B 1E 50 0E

100 | 00 0A 20 20 20 20 20 20 00 00

110 | 00 FC 00 56 45 37 31 30 62 0A

120 | 20 20 20 20 20 20 00 9E

ViewSonic Corporation Confidential

18

-

Do Not Copy VE710b/s-1

(08-09) ID Manufacturer Name = VSC (11-10) Product ID Code = F618 (12-15) Last 5 Digits of Serial Number = Not Used (16) Week of Manufacture = 01 (17) Year of Manufacture = 2005 (10-17) Complete Serial Number= See Descriptor Block (18) EDID Version Number = 1 (19) EDID Revision Number = 3 (20) VIDEO INPUT DEFINITION:

Analog Signal

0.700, 0.300 (1.000 Vp-p)

Blank-to-Black Setup, Separate Syncs

(21) Maximum Horizontal Image Size = 340 mm (22) Maximum Vertical Image Size = 270 mm (23) Display Gamma = 2.20 (24) Power Management and Supported Feature(s):

Active Off/Very Low Power, Standard Default Color Space,

Preferred Timing Mode

Display Type = R/G/B Color

(25-34) CHROMA INFO:

Red X - 0.639 Green X - 0.287 Blue X - 0.141 White X - 0.313

Red Y - 0.344 Green Y - 0.615 Blue Y - 0.087 White Y - 0.329

(35) ESTABLISHED TIMING I:

720 X 400 @ 70Hz (IBM,VGA)

640 X 480 @ 60Hz (IBM,VGA)

640 X 480 @ 67Hz (Apple,Mac II)

640 X 480 @ 72Hz (VESA)

640 X 480 @ 75Hz (VESA)

800 X 600 @ 56Hz (VESA)

800 X 600 @ 60Hz (VESA)

(36) ESTABLISHED TIMING II:

800 X 600 @ 72Hz (VESA)

800 X 600 @ 75Hz (VESA)

832 X 624 @ 75Hz (Apple,Mac II)

1024 X 768 @ 60Hz (VESA)

1024 X 768 @ 70Hz (VESA)

1024 X 768 @ 75Hz (VESA)

1280 X 1024 @ 75Hz (VESA)

(37) Manufacturer's Reserved Timing:

1152 X 870 @ 75Hz (Apple,Mac II)

ViewSonic Corporation Confidential

19

-

Do Not Copy VE710b/s-1

(38-53) Standard Timing Identification:

1280 X 1024 @60Hz

1280 X 960 @60Hz

1152 X 864 @75Hz

Not Used

Not Used ______________________________________________________________________

(54-71) Detailed Timing / Descriptor Block 1:

______________________________________________________________________

1280x1024 Pixel Clock: 108.00 MHz

Horizontal Image Size: 338 mm Vertical Image Size: 270 mm

Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal:

Active Time: 1280 pixels Blanking Time: 408 pixels

Sync Offset: 48 pixels Sync Pulse Width: 112 pixels

Border: 0 pixels Frequency: 63.98 KHz

Vertical:

Active Time: 1024 lines Blanking Time: 42 lines

Sync Offset: 1 lines Sync Pulse Width: 3 lines

Border: 0 lines Frequency: 60.02 Hz

Digital Separate, Horizontal Polarity (+) Vertical Polarity (+) ______________________________________________________________________

(72-89) Detailed Timing / Descriptor Block 2:

Monitor Serial Number:

A34050100001

______________________________________________________________________

(90-107) Detailed Timing / Descriptor Block 3:

Monitor Range Limits:

Min Vertical Freq - 50 Hz

Max Vertical Freq - 75 Hz

Min Horiz. Freq - 30 KHz

Max Horiz. Freq - 80 KHz

Pixel Clock - 140 MHz

Secondary GTF - Not Supported ______________________________________________________________________

(108-125) Detailed Timing / Descriptor Block 4:

Monitor Name:

VE710b

(126) No Extension EDID Block(s)

(127) CheckSum OK

ViewSonic Corporation Confidential

20

-

Do Not Copy VE710b/s-1

6. THEORY OF OPERATION

This section describes the function of the LCD monitor per functional block. This monitor includes MB board, power board and button board.

6.1 MB BOARD The MB board is a two-layer, single-landed design with ground and internal planes provided. DC power from

the power board enters the board through a 6P connector. The other connector on the board is for the button board.

The VGA cable is a signal cable that carries the video, sync and DDC signals from the PC VGA adapter. This

system board consists of 4 functional areas: flat panel controller, MCU with flash ROM, and power regulators.

6.1.1 Flat panel controller: MST8111A(U3)

The heart of the system board is the Realtek MST8111A. The MST8111A is a graphics processing IC designed for LCD monitors. It provides all key IC functions required for LCD displays. On-chip functions include a high-speed triple-ADC, PLL, high scaling engine and OSD controller.

a) Clock Generation:

Crystal Input Clock (TCLK and XTAL). This is the input pair to an internal crystal oscillator and

corresponding logic. A 14.318 MHz crystal is recommended.

b) Analog to Digital Converter:

The MST8111A chip has three ADCs (analog-to-digital converters), one for each color (red, green and blue). The analog RGB signals are connected to MST8111A as described below.

Pin Name Pin Number Red + 63 Red - 62 Green + 60 Green - 59 Blue + 58

Blue - 57

c) OSD: The MST8111A has a fully programmable, high-quality OSD controller. The on-chip static

RAM (4096 words by 24 bits) stores the cell map and the cell definitions.

ViewSonic Corporation Confidential

21

-

Do Not Copy VE710b/s-1

d) MTV312 Micro Controller: The MTV312 micro controller (MCU) serves as the system micro controller.

It programs the MST8111A and manages other devices in the system such as the keypad, the backlight, the LED, the audio system and the non-volatile RAM using general purpose input/output (GPIO) pins.

Pin number Pin Name Pin Number Usage

21 P1.3 Key / Power on ,off 13 P3.4 NV_RAM (U4) SDA 14 P3.5 NV_RAM (U4) SCL 25 P1.7 Key_down 9 P6.3 Key_right 24 P1.6 Key_up 16 P6.2 Key_left 37 P4.1 Key_mute 34 P5.6 VGA connector 23 P1.5 Key_select 42 P5.3 LED_red 41 P5.4 LED_green 32 P6.6 LCD panel power1 on / off control 3 P5.0 LCD panel power2 on / off control 36 P4.0 Backlight on / off control

e) Panel Power Sequencing (VDDCTRL1, 2) (Pin 32, 3): The MTV312 has two dedicated outputs

VDDCTRL1 and 2 ( Pin32 and Pin3) to control LCD power sequencing once data and control signals

are stable.

f) Panel interface (Pin 1~25, Pin75~128) : The MTV312 driver interface is highly programmable. It supports dual bus /

dual port for SXGA d rive rs.

6.1.2 Power Regulator MC34063A (U6),AIC1739 (Q4): The MC34063A is a monolithic control IC containing the primary functions required for DC to DC converters. The device consists of an internal temperature

compensated reference, a comparator, and a controlled duty cycle oscillator with an active current sense circuit. The desired output voltage is determined by the equation, Volt = 1.25 ( 1 + R67 / R66). In this case, the output voltage is 3.3 Volts. The AIC1563 is a low dropout positive adjustable regulator with minimum of 1A output current capability, so it is well suited to serve as a 3.3 V or

2.5 V regulator.

6.1.3 Power Regulator MC34063A (U7): The MC34063A is a monolithic control IC containing the primary functions required for DC to DC converters. The device consists of an internal temperature compensated reference, a comparator, and a controlled duty cycle oscillator with an active current sense circuit. The desired output voltage is determined by the equation, Volt = 1.25 ( 1 + R85 / R86). In this case, the output voltage is 5.0 Volts for panel power.

ViewSonic Corporation Confidential

22

-

Do Not Copy VE710b/s-1

6.2 Power (Inverter) Board This is a specific power (inverter) board for VE710 monitor with output of 40W / 12V / 3.5A. It provides

12 VDC to drive the four cold cathode fluorescence tubes in the backlight.

6.2.1 The inverter's electrical specification is described below.

Input

Rated Input Voltage 12Vdc Input Voltage Range 11.4 ~ 12.6 Vdc Input Current <2A

On / Off control Voltage 2~3.3 for on, 0~1 for off

Output

Rated Output Strike-on Voltage 1500Vrms Rated Output Voltage 710Vrms at 7mA Rate Output Frequency 40~50KHz Rated Output Current 7~8 mA

6.2.2 Power This is a general purpose AC / DC adapter which converts 90~240 Vac to a stabilized DC voltage: 12

Volts, with a rated output current of 4.16A. The electrical specification is described below.

Rated Input Voltage 90~240 Vac, 50 / 60Hz Operation Input Voltage 90~260 Vac, 47 ~ 63Hz Input Current <1.5A Inrush Current <100A@120Vac Standby Input Voltage 12Vdc Output Voltage Regulation +/-5% Output Ripple & Noise 120mVp-p Rate Output Current <3.5A Turn-on delay <3secs

ViewSonic Corporation Confidential

23

-

Do Not Copy VE710b/s-1

5. Adjustment Procedure

OSD Function Menu

A. When in Analog Input Mode

1. Main Menu

Press the [1] (Menu) button to enter the Main Menu: Press the [▲] button to highlight the previous item or the [▼] button to highlight the next item. Press the [1] (Menu) button to exit the Main Menu.

(1) Auto Image Adjust Page:

Press the [2] button to execute the auto image adjust function.

Press the [1] button to exit the page.

(2) Contrast/Brightness Page:

Press the [2] button to enter the contrast adjustment page.

Press the [1] button to exit the page.

1) Contrast Item

Press the [▲] button to increase the contrast. Press the [▼] button to decrease the contrast. Press the [2] button to enter the brightness adjustment page. Press the [1] button to exit the page.

2) Brightness Item

Press the [▲] button to increase the brightness. Press the [▼] button to decrease the brightness. Press the [2] button to enter the contrast adjustment page.

Press the [1] button to exit the page.

(3) Input Select Page:

Press the [2] button to switch to digital input mode.

(4) Color Adjust Page:

Press the [2] button to enter the color adjustment page. Press the [1] button to exit the page. Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) sRGB Item

2) 9300K Item

3) 6500K Item

4) 5400K Item

Press the [2] button to select the currently highlighted item.

Press the [1] button to exit the currently highlighted item.

5) User Color Item Press the [2] button to enter the user color page. Press the [1] button to exit the page.

Red, Green, Blue Options:

Press the [2] button to cycle among the colors. Press the [1] button to exit the page. Press the [▲] button to increase the selected color level.

Press the [▼] button to decrease the selected color level.

ViewSonic Corporation Confidential

24

-

Do Not Copy VE710b/s-1

(5) Information Page:

Press the [2] button to enter the information page. Press the [1] button to exit the information page.

(6) Manual Image Adjust Page:

Press the [2] button to enter the manual image adjustment page. Press the [1] button to exit the page. Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) H./V. Position Item

Press the [2] button to enter the horizontal/vertical postion adjustment page. Press the [1] button to exit the page.

a) Horizontal Position:

Press the [2] button to enter the vertical position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the image to the right.

Press the [▼] button to shift the image to the left.

b) Vertical Position:

Press the [2] button to return to the horizontal position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the image upward.

Press the [▼] button to shift the image downward.

2) Horizontal Size Item

Press the [2] button to enter the horizontal size adjustment page. Press the [1] button to exit the page. Press the [▲] button to make the image wider. Press the [▼] button to make the image narrower.

3) Fine tune Item

Press the [2] button to enter the fine tuning page. Press the [1] button to exit the page. Press “[▲]” Button to adjust character position in one direction. Press “[▼]“Button to adjust character position in the other direction.

4) Sharpness Item

Press the [2] button to enter the sharpness adjustment page. Press the [1] button to exit the page. Press “[▲]” Button to increase image sharpness. Press “[▼]“ Button to decrease image sharpness.

(7) Setup Menu Page:

Press the [2] button to enter the setup menu page. Press the [1] button to exit the page. Press the [▲] button to highlight the previous item or the [▼] button to

highlight the next item.

1) Language Select Item

Press the [2] button to enter the language selection page.

ViewSonic Corporation Confidential

25

-

Do Not Copy VE710b/s-1

Press the [1] button to exit the page. Press the [▲] button to highlight the previous item or the [▼] button to highlight the next item.

English, French… Option

Press the [2] button to select the language. Press the [1] button to exit the page.

2) Resolution Notice Item

Press the [2] button to enter the resolution notice page.

Press the [1] button to exit the page.

Enable, Disable Option

Press the [2] button to select the highlighted option. Press the [1] button to exit the page.

Press the [▲] button to highlight the previous option or the [▼] button to highlight the next option.

3) OSD Position Item

Press the [2] button to enter the OSD position adjustment page.

Press the [1] button to exit the page.

a) Horizontal Position Option

Press the [2] button to enter the vertical position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the menu to the right.

Press the [▼] button to shift the menu to the left.

b) Vertical Position Option:

Press the [2] button to enter the horizontal position adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to shift the menu upward.

Press the [▼] button to shift the menu downward.

4) OSD Time Out Item

Press the [2] button to enter the OSD time out adjustment page.

Press the [1] button to exit the page.

Press the [▲] button to increase the OSD time out.

Press the [▼] button to decrease the OSD time out.

5) OSD Background Item

Press the [2] button to enter the OSD background selection page.

Press the [1] button to exit the page.

Enable, Disable Option

Press the [▲] button to highlight the previous option or the [▼] button to highlight the next option.

Press the [2] button to select the highlighted option.

Press the [1] button to exit the page.

(8) Memory Recall Page

Press the [2] button to execute the memory recall function. Press the [1] button to exit the page.

ViewSonic Corporation Confidential

26

-

Do Not Copy VE710b/s-1

2. Other Menu:

This “shortcut” menu is directly accessible without bringing up the OSD.

(1) Contrast Dialog

Press the [▲] or [▼] button to enter the Contrast Dialog. Press the [1] button to exit the Contrast Dialog. Press the [2] button to enter the Brightness Dialog.

Press the [▲] button to increase the contrast.

Press the [▼] button to decrease the contrast.

(2) Brightness Dialog

Press the [▲] or [▼] button to enter the Brightness Dialog. Press the [1] button to exit the Brightness Dialog. Press the [2] button to enter the Contrast Dialog.

Press the [▲] button to increase the brightness.

Press the [▼] button to decrease the brightness.

(3) Analog/Digital Dialog

Press the [2] button to toggle between analog and digital modes.

ViewSonic Corporation Confidential

27

-

Do Not Copy VE710b/s-1

3. Function test

(1) Test equipment

Color video signal and pattern generator (or PC with SXGV resolution)

(2) Test condition

Before function testing and alignment, the unit must warm up for at least 30 minutes under the

following conditions:

1. Room temperature

2. With full-white screen, RGB, black pattern

3. With cycled display modes

4. Test display modes

Item Timing Analog

1 640 x 350 @ 70Hz, 31.5kHz Yes 2 640 x 400 @ 60Hz, 31.5kHz Yes 3 640 x 400 @ 70Hz, 31.5kHz Yes 4 640 x 480 @ 50Hz, 24.7kHz Yes 5 640 x 480 @ 60Hz, 31.5kHz Yes 6 640 x 480 @ 67Hz, 35.0kHz Yes 7 640 x 480 @ 72Hz, 37.9kHz Yes 8 640 x 480 @ 75Hz, 37.5kHz Yes

9 640 x 480 @ 85Hz, 43.27kHz Yes 10 720 x 400 @ 70Hz, 31.5kHz Yes 11 800 x 600 @ 56Hz, 35.1kHz Yes 12 800 x 600 @ 60Hz, 37.9kHz Yes 13 800 x 600 @ 75Hz, 46.9kHz Yes 14 800 x 600 @ 72Hz, 48.1kHz Yes 15 800 x 600 @ 85Hz, 53.7kHz Yes 16 832 x 624 @ 75Hz, 49.7kHz Yes 17 1024 x 768 @ 60Hz, 48.4kHz Yes 18 1024 x 768 @ 70Hz, 56.5kHz Yes 19 1024 x 768 @ 72Hz, 58.1kHz Yes 20 1024 x 768 @ 75Hz, 60.0kHz Yes 21 1024 x 768 @ 85Hz, 68.67kHz Yes 22 1152 x 864 @ 75Hz, 67.5kHz Yes 23 1152 x 870 @ 75Hz, 68.7kHz Yes 24 1280 x 1024 @ 60Hz, 63.4kHz Yes 25 1280 x 1024 @ 75Hz, 79.97kHz Yes 26 1280x 720 @ 60Hz, 45kHz (HDTV) Yes

ViewSonic Corporation Confidential

28

-

Do Not Copy VE710b/s-1

5. Test pattern

Item

1 Frequency & performance Cross-hatch pattern 2 Monitor saturation 16-gray scale pattern

3 RGB color performance RGB color Check the color temperature of

4 Sub-pixel defect RGB color Check for sub-pixel defects Pattern 3,

5 Full white Full white Check the brightness and contrast ratio,

6 Full black Full black Pattern 7

7. 5-cycle pattern 5-cycle pattern Check the BU Pattern 8

8. 1-dot pattern 1-dot pattern Check the flicker Pattern 9

Test condition Pattern Specification Remark

No noise is allowed, all colors must be clear

3 to 4 levels must be saturated when brightness and contrast are set to 100%

RGB signal color

and check for bright pixel defects

Pattern 1 Pattern 2

Pattern 3, 4, 5

4 , 5 Pattern 6

Pattern 1 Pattern2

Pattern 3 Pattern4

ViewSonic Corporation Confidential

29

-

Do Not Copy VE710b/s-1

Pattern 5 Pattern6

Pattern 7 Pattern 8

Pattern 9

ViewSonic Corporation Confidential

30

-

Do Not Copy VE710b/s-1

6. Firmware update procedure :

T

o PC

To

monitor

When examining a monitor, please check whether the firmware version is the latest. If not,

please follow the procedure below to upgrade to the latest version.

1. Equipment needed :

- VE710s/b

- PC ( Personal computer )

- LPT cable

- Fixture (LM5ISP)

- Firmware upgrade program

Print port Fixture VE710s/b

LPT cable

2. Connection :

ViewSonic Corporation Confidential

31

-

Do Not Copy VE710b/s-1

7. Appendix A : How to install the software for ISP :

ViewSonic Corporation Confidential

32

-

Do Not Copy VE710b/s-1

1. Install ISP

1.1 User could download ISP river and PORT95NT install from Myson Century website

(www.myson.com.tw

)

1.2 After extracting the ZIP file , the total files list as Fig 1.2 , and double click the file of setup.exe to install.

1.3 Press “ Next “ button to continue., see Fig 1.3

ViewSonic Corporation Confidential

33

-

Do Not Copy VE710b/s-1

1.4 Keep default setting or press “ Change “ button for selecting the path that you want , and then press “ Next “ button to continue , see Fig 1.4 .

1.5 Press “ Install “ button to continue , see Fig 1.5

ViewSonic Corporation Confidential

34

-

Do Not Copy VE710b/s-1

1.6 The installer Information shows package warning , Press “ Ignore “ button to continue .see Fig 1.6 .

1.7 Installation has finished , press “ Finish “ button , see Fig 1.7 .

Fig. 1.7

ViewSonic Corporation Confidential

35

-

Do Not Copy VE710b/s-1

8. Appendix B : How to use software to upgrade the BIOS :

8.1. After installation, shortcuts may be found in the settings path or the program menu (default setting); see Fig 2.1.

8.2 The security file is a key to use ISP functions; press the "OK" button. See Fig 2.2.

ViewSonic Corporation Confidential

36

-

Do Not Copy VE710b/s-1

8.3 The warning shown in Fig. 2.3 is used to remind the user that a CPU rate that differs from IIC protocol may cause the ISP functions to fail; press the "OK" button.

8.4 Press “ Create Security File “ button to key in Security code . Adjusting bar to decrease speed of IIC bus , See

Fig. 2.4 .

ViewSonic Corporation Confidential

37

-

Do Not Copy VE710b/s-1

8.5 Fig 2.7 shows the settings for the ISP software's security code. It requires two command numbers, and the commands must be keyed in sequentially: 7C, 4C, 77. The command numbers and commands

must be set by the user while coding. For more details, please refer to section 6 boot code of ISP.

ViewSonic Corporation Confidential

38

-

Do Not Copy VE710b/s-1

9. Use ISP to program MCU

9.1 Select MTV type first , load the binary or intel hex file that you want to program into the MCU , and select “ AUTO” item , then press “ RUN “ button , see fig3.1

9.2 If user change the MTV type , it must load file again , or the buffer of load file will be cleared .

9.3 CRC ( cyclic redundancy check ) : the host can check CRC register’s result instead of reading every byte in

flash . The message of Check MCU CRC OK means that the host verify OK for the progress of program .

ViewSonic Corporation Confidential

39

-

Do Not Copy VE710b/s-1

10. Use ISP to rea d MCU content

10.1 Only software ISP could read the MCU content , it is according to program the boot code while coding . The limitation is used for the security of customer’s code. Select “ Read Target “ item , and press

"button" , the MCU content will show as Fig4.1

ViewSonic Corporation Confidential

40

-

Do Not Copy VE710b/s-1

11. Re-entry the ISP Mode

When you couldn’t select or click “ Reset MCU “ button and enter ISP mode again , you’ll see the message as below :

ViewSonic Corporation Confidential

41

-

Do Not Copy VE710b/s-1

Note :

(1) Disable the “ Enter ISP Mode ” option to avoid the error message display

(2) If you using the MTV312M64 or before MCU serials , the MCU will always in “ ISP Mode “ even

Programming fail or erase MCU that instead of select or press “ Reset MCU “

ViewSonic Corporation Confidential

42

-

Do Not Copy VE710b/s-1

6. Troubleshooting Flow Chart

1. No Power

ViewSonic Corporation Confidential

43

-

Do Not Copy VE710b/s-1

2. No Characters , Missing Color

3 Always show NO SIGNEL

ViewSonic Corporation Confidential

44

-

Do Not Copy VE710b/s-1

button board

1

Scaler board

1

Scaler board

1

power board / inverter

1

power board / inverter

1

front bezel ass'y

1

back cover ass'y

1

Base ass'y

1

MB-LCD cable

CD + user menu

1

ID label on carton

1

CPT LCD panel

1

QDI LCD panel

1

Screw

Added 03/24/05

LCD film

carton

1

PE bag

1

end cap( R)

1

end cap( L)

1

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power cord (US)

A-PC-0106-0224

DM333181G97

AC power cord

1

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power cord (US)

A-PC-0106-0224

DM333181G97

AC power cord

1

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power cord (China)

A-PC-0106-0306

DM333181S01

AC power cord

1

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power Cord (Europe)

A-PC-0106-0227

DM333181801

AC power cord

1

7. Recommended Spare Parts List

RECOMMENDED SPARE PARTS LIST (VE710b-1)

ViewSonic Model Number: VLCDS27998-2W Rev: 1c

Item ECR/ECN ViewSonic P/N Ref. P/N Location Q'ty

Board Assembly:

1 Button board ass'y B-CB-0206-0170 2 Chassis ass'y B-MB-0201-0828 23L7VCSVS36 Chassis ass'y 1

3

4

Cabinets:

5 Front enclosure C-FP-0301-9923 6 Rear enclosure C-BC-0302-0575 7 Stand ass'y C-BS-0303-0506

Cables:

8 Cable for MB-LCD (30P. Rev.2A) Added 03/24/05 CB-00002261 9 Cable for MB-B/B (8P/10P. Rev.1A) Added 03/24/05 CB-00002262 DDL7VCTH004 M/B-B/B cable 1

10 Cable for PB-MB Added 03/24/05 CB-00002263 DDL7VCPB101 P/B -M/B cable 1 11 VGA cable Added 03/24/05 CB-00000182 DDL7VCPC001 VGA cable 1

Documentation:

12 13 ID label M-LB-0813-0918

Electronic Components:

14

Hardware:

15 PCB BKT ass'y M-BK-0805-0059 34L7VBAVS00 PCB BKT ass'y 1 16 Screw ( To assembly the cabinet) M-SCW-0824-6797 17 Screw ( To assembly the cabinet) M-SCW-0824-6798 18 Screw ( To assembly the cabinet) M-SCW-0824-6799 19 Screw ( To assembly the cabinet) M-SCW-0824-6800 20 Screw ( To assembly the cabinet) M-SCW-0824-6801 21 Screw ( To assembly the cabinet) M-SCW-0824-6802

Miscellaneous:

22 23 VESA rubber plug Added 03/24/05 M-MS-0808-9237 GAL7V006014 VESA RUBBER PLUG 4 24 8ms sticker Added 03/24/05 M-00002264 HCL7V028010 8ms sticker 1

Packing Material:

25 Carton P-BX-0601-0933 26 PE bag M-MS-0808-7710 27 Polyform ( R ) P-FM-0602-0841 28 Polyform (L) P-FM-0602-0840

Description

Main Board Removed 03/24/05 B-MB-0201-2765 Main Board (2nd Source) Added 07/01/04 B-MB-0201-2726 Power board Removed 03/24/05 B-SB-0221-0595 Power board (2nd Source) Added 07/01/04 B-SB-0221-0686

CD wizard

User manual + CD wizard DC-00002229 HGL7V016015 user's manual 1

LCD panel (CPT) M-LCD-0826-0193 LCD panel (QDI) M-LCD-0826-0195

17" QDI TFT LCD panel E-00002216 AA17EL07055 LCD panel 1

LCD film L7VC

Removed and Replaced:

ECR 5218

Removed and Replaced:

ECR 5218

A-CD-VE710B

M-MS-0808-7399 JXL7V003017

23L7VBB0026

29L7VMB00A8 29L7VMB0000

AS02B012009 AS020126104

33L7VFBVS29

37L7VBCVS38

26L7VSAVS17

DDL7VXLC004

HGL7V005013

HCL7V017018 AA0170EA101 AA17EL07063

MF40080BJ29

MM30080BBJ2

MM35080BBW2

MM30060IBJ8 MF40080PBJ6 MM30040IBJ9

HFL7V006019 HAL7E002013 HBL7V006015 HBL7V005019

1

3 1 1

11

2

10

1

Description

ViewSonic Corporation Confidential

45

-

Do Not Copy VE710b/s-1

button board

1

Scaler board

1

Scaler board

1

power board / inverter

1

power board / inverter

1

C-BC-0302-0576

back cover

front bezel ass'y

MB-LCD cable

CPT LCD panel

1

QDI LCD panel

1

Screw

Added 03/24/05

LCD film

cushion

M-Model (VE710s-1M)

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power cord (US)

A-PC-0106-0224

DM333181G97

AC power cord

1

P-Model (VE710s-1P)

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power cord (US)

A-PC-0106-0224

DM333181G97

AC power cord

1

G-Model (VE710s-1G)

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power cord (China)

A-PC-0106-0306

DM333181S01

AC power cord

1

E-Model (VE710s-1E)

Item

ECR/ECN

ViewSonic P/N

Ref. P/N

Location

Q'ty1Accessories:

Power Cord (Europe)

A-PC-0106-0227

DM333181801

AC power cord

1

RECOMMENDED SPARE PARTS LIST (VE710s-1)

ViewSonic Model Number: VLCDS27998-1W Rev: 1c

Item ECR/ECN ViewSonic P/N Ref. P/N Location Q'ty

Board Assembly:

1 Button board ass'y B-CB-0206-0170 2 Chassis ass'y B-MB-0201-0828 23L7VCSVS36 Chassis ass'y 1

3

4

Cabinets:

5 6 Front bezel assy C-FP-0301-9924 7 Stand ass'y C-BS-0303-0509 26L7VSAVS25 Stand ass'y 1

Cables:

8 Cable for MB-B/B (8P/10P. Rev.1A) CB-00002262 DDL7VCTH004 M/B-B/B cable 1 9 Cable for MB-LCD (30P. Rev.2A) CB-00002261

10 Cable for PB-MB CB-00002263 DDL7VCPB101 P/B -M/B cable 1 11 VGA cable Added 03/24/05 CB-00000182 DDL7VCPC001 VGA cable 1

Documentation:

12

Electronic Components:

13

Hardware:

14 PCB BKT ass'y M-BK-0805-0059 34L7VBAVS00 PCB BKT ass'y 1 15 Screw ( To assembly the cabinet) M-SCW-0824-6797 16 Screw ( To assembly the cabinet) M-SCW-0824-6798 17 Screw ( To assembly the cabinet) M-SCW-0824-6799 18 Screw ( To assembly the cabinet) M-SCW-0824-6800 19 Screw ( To assembly the cabinet) M-SCW-0824-6801 20 Screw ( To assembly the cabinet) M-SCW-0824-6802

Miscellaneous:

21 8ms sticker Added 03/24/05 M-00002264 HCL7V028010 8ms sticker 1 22 23 VESA rubber plug Added 03/24/05 M-MS-0808-9237 GAL7V006014 VESA RUBBER PLUG 4

Packing Material:

24 8ms sticker M-00002264 HCL7V028010 8ms sticker 1 25 Carton P-BX-0601-0934 HFL7V008011 carton 1 26 End cap (L) P-FM-0602-0840 27 End cap (R) P-FM-0602-0841 28 EPE bags M-MS-0808-8981 HAL7V001012 EPE bags 1

Description

Main Board Removed 03/24/05 B-MB-0201-2765 Main Board (2nd Source) Added 07/01/04 B-MB-0201-2726 Power board Removed 03/24/05 B-SB-0221-0595 Power board (2nd Source) Added 07/01/04 B-SB-0221-0686 back cover assy

User manual + CD wizard DC-00002227 HGL7V018018 user's manual 1 LCD panel (CPT) M-LCD-0826-0193 LCD panel (QDI) M-LCD-0826-0195

17" QDI TFT LCD panel E-00002216 AA17EL07055 LCD panel 1

LCD film L7VC

Removed and Replaced:

ECR 5218

M-MS-0808-7399 JXL7V003017

23L7VBB0026

29L7VMB00A8

29L7VMB0000

AS02B012009

AS020126104

37L7VBCVS46

33L7VFBVS37

DDL7VXLC004

AA0170EA101

AA17EL07063

MF40080BJ29

MM30080BBJ2

MM35080BBW2

MM30060IBJ8

MF40080PBJ6

MM30040IBJ9

HBL7V005019 HBL7V006015

1 1

1

3 1 1

11

2

10

1

1 1

Description

ViewSonic Corporation Confidential

46

-

Do Not Copy VE710b/s-1

Location

U3

U4

U5

U6,U7

Q6,Q7

Q9

Q1,Q2,Q3,Q10,Q11

Q4

Q12

Q5

D26,D29

D24,D25,D33,D34,D35

C65,C86

C41,C42,C50,C51,C52,C53

C60,C87

C76,C77

C1,C3,C4,C6,C8,C10

C7,C45,C88

C11,C13

FUSE1,R83,R108

L13,L18,R104

L23,L35,R64

R63

R48,R49,R50,R51,R59

R1,R4,R8,R98

R2,R5,R9

L16,L17

R27

0,R93

92,R112,R113

R67

R66,R85

R91,R96,R97

5,R71,R75,R88,R90

R41,R74,R77

L8,L9,L10,L11,L12

R114

R111

R94

R3,R6,R10

D30

L2,L3,L6

R86

C101

49,C70

BOM LIST (VE710b-1)

ViewSonic Model Number: VLCDS27998-2W Rev: 1b

Item ViewSonic P/N Ref. P/N Description

1 #N/A 1L7VCZQVS41 L7VC LCD MONITOR(QDI-V09)USA 2 B-00002217 29L7VMB02X9 L7VC M/B ASSY(QDI V09)MST8111A 1 3 #N/A 3BL7VSS0068 L7VC M/B S/S ASSY(QDI)LVDS 1 4 #N/A DAL7VCMB2D8 PCB(M/B) L7VC MB(2L,12.5*11,REVD) 1 5 #N/A AJ08111CC07 IC(128P) MST8111A(135MHZ,FQFP) 6 #N/A AKE3I8B0602 IC EEPROM(8P)M24C08-WMN6T(1K*8,400K,SO8) 7 #N/A AJ00312VP18 IC(44P) MTV312MV64AJ(12MHZ,PLCC) 8 E-IC-0450-0036 AL034063015 IC(8P) MC34063ECD-TR(SOP)

9 E-IC-0450-0016 AL034063023 IC(8P) MC34063A(SOP) 10 #N/A BAM23010Z05 TRANSISTOR MOSFET SI2301DS(-12V,-2.3A) 11 #N/A BA001430Z22 TRANSISTOR SMD DTC143EUA(50V,100MA) 12 #N/A BA039060Z01 TRANSISTOR,SMD MMBT3906(40V,200MA) 13 #N/A AL001739001 IC(3P) AIC1739-25CX(SOT89) 14 #N/A BA039040Z01 TRANSISTOR,SMD MMBT3904(40V,200MA) 15 #N/A BAN70020Z13 TRANSISTOR MOSFET 2N7002E(60V,250MA) 16 #N/A BC000014Z01 DIODE SMD SSM14(40V,1A)SCHOTTK 17 #N/A BCAN217T003 DIODE DAN217(80V,100MA) 18 #N/A CH51004MA32 CAP CHIP 1UF 25V(+-20%,Y5V,0805) GP 19 #N/A CH02206J909 CAP CHIP 22P 50V(+-5%,NPO,0603) GP 20 #N/A CH14706K919 CAPACITOR CHIP 470P 50V(+-10%,X7R,0603) 21 #N/A CH22206K917 CAP CHIP 2200P 50V(+-10%,X7R,0603) GP 22 #N/A CH34703K916 CAP CHIP 0.047UF 16V(+-10%,X7R,0603) GP 23 #N/A CH31006K919 CAP CHIP 0.01U 50V(+-10%,X7R,0603) GP

C18,C19,C20,C21,C22,C23,C 24,C26,C27,C29,C31,C32,C34

24 #N/A CH41004Z931 CAP CHIP 0.1U,25V(+80-20%,Y5V,0603) GP

25 #N/A CH03306J905 CAP CHIP 33P 50V(+-5%,NPO,0603) GP 26 #N/A CS00006J205 RESISTOR CHIP 0 1/4W+-5%(3216) 27 #N/A CS00004JA07 RESISTOR CHIP 0 1/8W +-5%(0805) 28 #N/A CS00003J900 RESISTOR CHIP 0 1/10W+-5%(0603) 29 #N/A CS+3006J204 RESISTOR CHIP 0.3 1/4W,+-5%(3216) 30 #N/A CS02203J902 RES CHIP 22 1/10W +-5%(0603) 31 #N/A CS03303J909 RES CHIP 33 1/10W +-5%(0603) 32 #N/A CS07503F905 RESISTOR CHIP 75 1/10W +-1%(1608)

33 #N/A CS11003J904 RESISTOR CHIP 100 1/10W +-5%(0603)

34 #N/A CS13303F909 RESISTOR CHIP 330 1/10W +-1%(0603) 35 #N/A CS13903F901 RESISTOR CHIP 390 1/10W+-1%(0603)

36 #N/A CS21003J906 RES CHIP 1K 1/10W +-5%(0603)

37 #N/A CS22003J909 RES CHIP 2K 1/10W +-5%(0603) 38 #N/A CS22203F904 RES CHIP 2.2K 1/10W,+-1%(0603)

39 #N/A CS23603F901 RESISTOR CHIP 3.6K, 1/10W,+-1%(0603) 40 #N/A CS24703F908 RESISTOR CHIP 4.7K 1/10W+-1%(0603)

41 #N/A CS31003J908 RES CHIP 10K 1/10W +-5%(0603) 42 #N/A CS38203J904 RES CHIP 82K 1/10W +-5%(0603)

43 #N/A CX0E601R009 EMI FILTER CHIP HZ0805E601R(600,500MA) 44 #N/A CS-3303J901 RESISTOR CHIP 3.3 1/10W +-5%(1608) 45 #N/A CS04703J906 RES CHIP 47 1/10W +-5%(0603) 46 #N/A CS26803J909 RESISTOR CHIP 6.8K 1/10W +-5%(1608)

47 #N/A CS33303J904 RESISTOR CHIP 33K 1/10W +-5%(0603) R39,R40,R87,R99,R100,R101 6 48 #N/A CS06803J905 RESISTOR CHIP 68 1/10W +-5%(1608)

49 #N/A BDGZ5226Z03 DIODE ZENER SMD MMGZ5226B(3.3V) 50 #N/A CX000300104 EMI FILTER CHIP FCM1608C-300T06 30,600MA 51 #N/A CS21203F901 RES CHIP 1.2K 1/10W +-1%(0603) 52 #N/A CH51001K991 CAP CHIP 1U 6.3V(+-10%,X5R,0603)

53 #N/A CC62204MD23 CAP ELEC 22U 25V(+-20%,105C,5*11,2000HR)

,C35,C37,C38,C39,C40,C43,C 44,C46,C47,C48,C55,C56,C59 ,C61,C64,C68,C69,C78,C82,C 89,C92,C93

L1,L5,L7,R7,R11,R13,R14,R1 8,R19,R28,R29,R46,R47,R60, R89

L14,L15,L37,L38,L39,R68,R7

R12,R15,R35,R36,R53,R54,R

L22,R37,R38,R44,R52,R61,R6

C17,C25,C28,C30,C33,C36,C

Q'ty

1 1 1 2 2 2 1 5 1 1 1 2 5 2 6 2 2 6 3

35

2 3 3 3 1 5 4 3

15

2 1

8

9 1

2 3

11

3 5 1 1 1

3 1 3 1 1

8

ViewSonic Corporation Confidential

47

-

Do Not Copy VE710b/s-1

Item ViewSonic P/N Ref. P/N Description

Location

49,C70

C58,C62,C79,C90

L21,L32

CN9

CN2

CN4

CN6

X2

X1

CN1

LED1

SW1,SW2,SW3,SW4,SW5

54 #N/A CC622L4MD06 CAP ELEC DIP 22U 25V(+-20%,105C,5*11)LXN 55 #N/A CC73303MD51 CAP ELEC 330U 16V(+-20%,105C,8*11,2000HR

56 #N/A CC733L3MD09 CAP ELEC DIP330U 16V(+-20%,105C,8*11)LXN 57 E-L-0407-1563 DC04725K002 CHOKE COIL 47UH(2.5A,+-10%,T07473) 58 M-MS-0808-9809 DFHD30MR259 CONN DIP HEADER 30P 2R MR(P2.0,H4.0) 59 #N/A DFHD14MS264 CONN DIP HEADER 14P 2R MS(P2.0,H6.0) 60 M-MS-0808-9810 DFHD10MR316 CONN DIP HEADER 10P 1R MR(P2.0,H4.1) 61 #N/A DFHD08MS439 CONN DIP HEADER 8P 2R MS(P2.54,H6.0) 62 #N/A BG611059319 CRYSTAL DIP 11.0592MHZ(+-30PPM,49/US) 63 E-X-0415-0128 BG614318D55 XTAL DIP 14.318MHZ(+-30PPM,07010-X-136-2 64 #N/A AZL7VC0Q003 L7VC SW BIOS IMAGE(QDI) 1 65 B-SB-0221-0686 AS020126104 ADP/INV ADP-40AFA, 90~264V REV1A 1 66 B-00000936 AS05B310202 ADD/INV,SLV0315A0450-1057,90~264V REV1A 1 67 B-CB-0206-0170 23L7VBB0026 L7VC BUTTON/B ASSY 1 68 #N/A DFHD08MR301 CONN DIP HEADER 8P 1R MR(P2.0,H4.1) 69 #N/A BEYG0013DA3 LED(DIP) YELLOW/GREEN(L-3WYGW) 70 #N/A DAL7VCTB1C5 PCB(BUTTON) L7VC TL(1L,125*23,REVC) 1 71 #N/A DHP0002B205 SWITCH PUCH BUTTON(PT-002-B2,50MA,12V) 72 #N/A 22L7VLAVSE9 L7VC-Q LCD MODULE ASSY(QDI)BLACK 1 73 C-FP-0301-9923 33L7VFBVS29 L7VC FRONT BEZEL ASSY 1 74 C-FP-0301-1066 EAL7V012014 LCD BEZEL L7VC(EAL7V012,REV3C) 1 75 M-MS-0808-9242 EBL7V021014 LENS L7VC(EBL7V021,REV3A) 1 76 PL-BT-0706-0179 EBL7V022011 CONTROL BUTTON L7VC(EBL7V022,REV3A) 1 77 M-MS-0808-9243 FEL7V003019 LOGO FRONT-VSC-38MM L7VC(FEL7V003,REV3A) 1 78 M-MS-0808-9244 FEL7V004015 BIRD LOGO-10MM L7VC(FEL7V004,REV3A) 1 79 M-MS-0808-9249 JXLM7002011 FOIL LM7S(JXLM7002,REV3B) 1 80 C-BC-0302-0575 37L7VBCVS38 L7VC BACK COVER ASSY 1 81 M-CV-0830-2616 EAL7V013011 LCD COVER L7VC(EAL7V013,REV3C) 1 82 M-CV-0830-2484 FBL7V007011 KENSINGTON CAP(FBL7V007,REV3A) 1 83 M-CV-0830-2617 FBL7V034019 HINGE ASSY L7VC(FBL7V034,REV3A) 1 84 M-BK-0805-0125 FBL7V036011 VESA BKT-LONG L7VC(FBL7V036,REV3A) 1 85 M-MS-0808-8718 EBL7V003016 LOGO PLATE(EBL7V003,REV3A) 1 86 M-MS-0808-9246 GBLM7003017 GASKET-3 LM7S(GBLM7003,REV3A) 1 87 M-SCW-0824-6797 MF40080BJ29 SCREW F4.0*8-B(BNI) 7 88 M-BK-0805-0059 34L7VBAVS00 L7VC PCB BKT ASSY 1 89 M-BK-0805-0126 FAL7V011018 PCB BRACKET L7VC(FAL7V011,REV3A) 1 90 M-MS-0808-7301 FCL7V011010 P/B MYLAR-UP L7VC(FCL7V011,REV3A) 1 91 M-MS-0808-9247 EBL70023013 WIRE MOUNTS L70L-E(EBL70023,REV3A) 1 92 M-LB-0813-0894 HCL7V005010 WARNING LABEL, INVERTOR(HCL7V005,3A) 1 93 E-00002216 AA17EL07055 LCD(TFT) 17" QD17EL07 REV:09 1 94 M-BK-0805-0127 FAL7V016010 LCD BKT-L-QDI L7VC(FAL7V016,REV3A) 1 95 M-BK-0805-0128 FAL7V017016 LCD BKT-R-QDI L7VC(FAL7V017,REV3A) 1 96 M-MS-0808-8984 FCL70004010 LCD MYLAR L70L-E(FCL70004,REV3A) 1 97 M-MS-0808-9248 FCL7A001014 AL FOIL L7A(FCL7A001,REV3A) 2 98 M-MS-0808-7302 FCL7V012016 P/B MYLAR-DOWN L7VC(FCL7V012,REV3A) 1 99 M-SCW-0824-6797 MF40080BJ29 SCREW F4.0*8-B(BNI) 3

100 M-SCW-0824-6798 MM30080BBJ2 SCREW M3.0*8,B(NI) 1 101 M-SCW-0824-6799 MM35080BBW2 SCREW M3.5*8-B (NI,WASHER) 1 102 M-SCW-0824-6800 MM30060IBJ8 SCREW M3.0*6.0-I(NI) 7 103 M-SCW-0824-6801 MF40080PBJ6 SCREW F4.0*8-P(NI) 2 104 M-SCW-0824-6802 MM30040IBJ9 SCREW M3.0*4.0-I(NI) 10 105 M-CV-0830-0284 GAL7V009013 RUBBER PLUG COVER L7VC(GAL7V009,REV3A) 2 106 M-SCW-0824-0728 MM30050IBJ3 SCREW M3.0*5.0-I(NI) 2 107 M-SCW-0824-6948 MM30050FCI5 SCREW M3.0*5-F(NI,NYLOK) 2 108 M-MS-0808-9237 GAL7V006014 RUBBER PLUG VESA L7VC(GAL7V006,REV3C) 4 109 C-BS-0303-0506 26L7VSAVS17 L7VC STAND ASSY 1 110 C-BS-0303-0562 EAL7V014017 BASE L7VC(EAL7V014,REV3A) 1 111 M-MS-0808-7304 FBL7V035015 BASE PLATE L7VC(FBL7V035,REV3A) 1 112 M-MS-0808-9251 GAL5V002013 RUBBER FOOT L5VC(GAL5V002,REV3A) 4 113 M-MS-0808-7305 GAL7V007011 RUBBER FOOT-FRONT L7VC(GAL7V007,R3A) 1 114 M-SCW-0824-6797 MF40080BJ29 SCREW F4.0*8-B(BNI) 5 115 M-LB-0813-1055 HCL7V020019 STAND LABEL L7VC(HCL7V020,REV3A) 1 116 #N/A 23L7VCSVS87 L7VC-Q CHASSIS ASSY(QDI) 1 117 CB-00002263 DDL7VCPB101 CABLE ASSY L7VC POWER-MB(8P/8P,REV1A) 1 118 CB-00000182 DDL7VCPC001 CABLE ASSY L7VC MB-VGA(14/15P,REV1A) 1 119 CB-00002262 DDL7VCTH004 CABLE ASSY L7VC BUTTON-MB(8P/10P,REV1A) 1 120 CB-00002261 DDL7VXLC004 CABLE ASSY L7VX MB-LCD(30P,REV1A) 1 121 M-MS-0808-7306 EBL7V023017 HINGE CAP L7VC(EBL7V023,REV3A) 2 122 M-SCW-0824-0816 MM40100BCI2 SCREW M4*10.0-B(NI,NYLOK) 4 123 #N/A 24L7VPKVSP4 L7VC-Q PACKING ASSY(USA) 1

C17,C25,C28,C30,C33,C36,C

Q'ty

8 4

4 2 1 1 1 1 1 1

1 1

5

ViewSonic Corporation Confidential

48

-

Do Not Copy VE710b/s-1

Item ViewSonic P/N Ref. P/N Description

Location

124 A-PC-0106-0224 DM333181G97 POWER CORD 3P 1.8M(USA)V04VS35001218000 1 125 M-MS-0808-7399 JXL7V003017 LCD FILM L7VC(JXL7V003,REV3B) 1 126 M-MS-0808-7710 HAL7E002013 PE BAG L7E(HAL7E002,REV3C) 1 127 P-FM-0602-0840 HBL7V005019 END CAP(L) L7VC(HBL7V005,REV3B) 1 128 P-FM-0602-0841 HBL7V006015 END CAP(R) L7VC(HBL7V006,REV3B) 1 129 M-LB-0813-0747 HCL7V004013 CORE LABEL(HCL7V004,REV3A) 1 130 M-LB-0813-0918 HCL7V017018 ID LABEL L7VC(HCL7V017,REV3D) 1 131 M-LB-0813-0745 HCL7V002011 SERIAL LEBAL L7V(HCL7V002,REV3A) 1 132 M-LB-0813-1042 HCL7V019011 CARTON LABEL L7VC(HCL7V019,REV3B) 1 133 P-BX-0601-0933 HFL7V006019 CARTON L7VC(HFL7V006,REV3B) 1 134 DC-00002229 HGL7V016015 CD+QSG VE710B L7VC-Q US(HGL7V016,REV3A) 1 135 #N/A JXLM5003011 HANDLE LM5S(JXLM5003,REV 3B) 1 136 #N/A HFL7V009018 SPACE PLATE L7VC(HFL7V009,REV3B) 0.028 137 M-LB-0813-1043 HCL70021011 HI-POT LABEL L70L(HCL70021,REV3A) 1 138 DC-00000426 HCL5V004018 WARNING LABEL L5VC(HCL5V004,REV3A) 1 139 M-00002264 HCL7V028010 8MS STICKER L7VC(HCL7V028,REV3A) 1

Q'ty

ViewSonic Corporation Confidential

-

Do Not Copy VE710b/s-1

49

Location

U3

U4

U5

U6,U7

Q6,Q7

Q9

Q1,Q2,Q3,Q10,Q11

Q4

Q12

Q5

D26,D29

D24,D25,D33,D34,D35

C65,C86

C41,C42,C50,C51,C52,C53

C60,C87

C76,C77

C1,C3,C4,C6,C8,C10

C7,C45,C88

C11,C13

FUSE1,R83,R108

L13,L18,R104

L23,L35,R64

R63

R48,R49,R50,R51,R59

R1,R4,R8,R98

R2,R5,R9

L16,L17

R27

R93

2,R112,R113

R67

R66,R85

R91,R96,R97

5,R71,R75,R88,R90

R41,R74,R77

L8,L9,L10,L11,L12

R114

R111

R94

R3,R6,R10

D30

L2,L3,L6

R86

C101

9,C70

C58,C62,C79,C90

BOM LIST (VE710s-1)

ViewSonic Model Number: VLCDS27998-1W Rev: 1b

Item ViewSonic P/N Ref. P/N Description

1 #N/A 1L7VCZQVS09 L7VC LCD MONITOR(QDI-V09/SILVER)USA 2 B-00002217 29L7VMB02X9 L7VC M/B ASSY(QDI V09)MST8111A 1 3 #N/A 3BL7VSS0068 L7VC M/B S/S ASSY(QDI)LVDS 1 4 #N/A DAL7VCMB2D8 PCB(M/B) L7VC MB(2L,12.5*11,REVD) 1 5 #N/A AJ08111CC07 IC(128P) MST8111A(135MHZ,FQFP) 6 #N/A AKE3I8B0602 IC EEPROM(8P)M24C08-WMN6T(1K*8,400K,SO8) 7 #N/A AJ00312VP18 IC(44P) MTV312MV64AJ(12MHZ,PLCC) 8 E-IC-0450-0036 AL034063015 IC(8P) MC34063ECD-TR(SOP)

9 E-IC-0450-0016 AL034063023 IC(8P) MC34063A(SOP) 10 #N/A BAM23010Z05 TRANSISTOR MOSFET SI2301DS(-12V,-2.3A) 11 #N/A BA001430Z22 TRANSISTOR SMD DTC143EUA(50V,100MA) 12 #N/A BA039060Z01 TRANSISTOR,SMD MMBT3906(40V,200MA) 13 #N/A AL001739001 IC(3P) AIC1739-25CX(SOT89) 14 #N/A BA039040Z01 TRANSISTOR,SMD MMBT3904(40V,200MA) 15 #N/A BAN70020Z13 TRANSISTOR MOSFET 2N7002E(60V,250MA) 16 #N/A BC000014Z01 DIODE SMD SSM14(40V,1A)SCHOTTK 17 #N/A BCAN217T003 DIODE DAN217(80V,100MA) 18 #N/A CH51004MA32 CAP CHIP 1UF 25V(+-20%,Y5V,0805) GP 19 #N/A CH02206J909 CAP CHIP 22P 50V(+-5%,NPO,0603) GP 20 #N/A CH14706K919 CAPACITOR CHIP 470P 50V(+-10%,X7R,0603) 21 #N/A CH22206K917 CAP CHIP 2200P 50V(+-10%,X7R,0603) GP 22 #N/A CH34703K916 CAP CHIP 0.047UF 16V(+-10%,X7R,0603) GP 23 #N/A CH31006K919 CAP CHIP 0.01U 50V(+-10%,X7R,0603) GP

C18,C19,C20,C21,C22,C23,C2 4,C26,C27,C29,C31,C32,C34,C

24 #N/A CH41004Z931 CAP CHIP 0.1U,25V(+80-20%,Y5V,0603) GP

25 #N/A CH03306J905 CAP CHIP 33P 50V(+-5%,NPO,0603) GP 26 #N/A CS00006J205 RESISTOR CHIP 0 1/4W+-5%(3216) 27 #N/A CS00004JA07 RESISTOR CHIP 0 1/8W +-5%(0805) 28 #N/A CS00003J900 RESISTOR CHIP 0 1/10W+-5%(0603) 29 #N/A CS+3006J204 RESISTOR CHIP 0.3 1/4W,+-5%(3216) 30 #N/A CS02203J902 RES CHIP 22 1/10W +-5%(0603) 31 #N/A CS03303J909 RES CHIP 33 1/10W +-5%(0603) 32 #N/A CS07503F905 RESISTOR CHIP 75 1/10W +-1%(1608)

33 #N/A CS11003J904 RESISTOR CHIP 100 1/10W +-5%(0603)

35,C37,C38,C39,C40,C43,C44, C46,C47,C48,C55,C56,C59,C6 1,C64,C68,C69,C78,C82,C89,C 92,C93

L1,L5,L7,R7,R11,R13,R14,R18 ,R19,R28,R29,R46,R47,R60,R8915