ViewSonic VE175-2, VE175b-2 Front Panel Function Control Description

3. Front Panel Function Control Description (VE175-2/VE175b-2)

Main Menu
with OnView controls

Displays, saves
changes to, and exits
the Main Menu.

Scrolls through menu
options and adjusts the
displayed control.

Front Control Panel

Power light

Power On/Off

Selects a highlighted control.
Also, displays the control screen
for the selected control and
toggles between control pairs.

Do the following to adjust the screen image:

1

To display the Main Menu, press button [1].

NOTE: All OnView menus and adjustment screens disappear automatically
after about 30 seconds. This time period is adjustable through the Setup menu
and the OSD timeout control described.

2

To highlight a control you want to adjust, press ▲ or ▼ to scroll up or down
the Main Menu.

3

To select the highlighted control, press button [2]. A control screen appears
like the example shown below.

The ▼ down
arrow decreases
Contrast, ▲ up
arrow increases
Contrast.

4

To adjust the control, press the up ▲ or down ▼ buttons.

5

To save the adjustments and exit the menu, press button [1] twice.

The line at the
bottom of the screen
tells you what you
can do next: select
the Brightness
control or Exit.

The following tips may help you optimize your display:

• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60 Hz to the LCD display. (Look for instructions on “changing the
refresh rate” in your graphic card's user guide.)

• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible

. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD display.)