381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Page 2
Copyright
Copyright
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
2005 by ViewSonic Corporation. All rights reserved. No part of this publication may be
¤
1a
04/14/05
Revision History
Documents Number
DCN Number ECR Number
5246
S
Description of Changes EditorRevision SM Editing Date
Initial Release
A. Lu
ViewSonic Corporation Confidential
i
-
Do Not Copy VA912/b
Page 3
TABLE OF CONTENTS
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Spare Parts List
9. Block Diagram
10. Schematic Diagrams
11. PCB Layout Diagrams
1
5
18
24
27
42
47
62
76
78
88
ViewSonic Corporation Confidential
ii
-
Do Not Copy VA912/b
Page 4
1. Precautions and Safety Notices
1. Appropriate Operation
(1) Turn off the product before cleaning.
(2) Use only a dry soft cloth when cleaning the LCD panel surface.
(3) Use a soft cloth soaked with mild detergent to clean the display housing.
(4) Use only a high quality, safety approved AC/DC power cord.
(5) Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
(6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
(7) Do not touch the LCD panel surface with sharp or hard objects.
(8) Do not place heavy objects on the LCD display, video cable, or power cord.
(9) Do not use abrasive cleaners, waxes or solvents for your cleaning.
(10) Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas containing excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
exposed in such areas as the associated transformer circuits.
4. LCD Module Handling Precautions
4.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when connecting or disconnecting input connector.
(3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.
(7) Do not open or modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module in any direction.
(9) In the event that a Module must be put back into the packing container slot after it was taken out of the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface
Connector of the TFT Module.
ViewSonic Corporation Confidential
1
-
Do Not Copy VA912/b
Page 5
(11)After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
should be supplied with power that complies with the requirements of Limited Power Source
(IEC60950 or UL1950), or an exemption should be applied for.
(14)The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.
ViewSonic Corporation Confidential
2
-
Do Not Copy VA912/b
Page 6
Correct methods : Incorrect Methods :
Only touch the metal-frame of the panel or the front cover
of the monitor.
Do not touch the surface of the polarizer .
Surface of the panel is pressed by fingers & this may
cause “ MURA “
Take out the monitor with cushion Take out the monitor by grasping the LCD panel.
That may cause “ MURA“.
ViewSonic Corporation Confidential
3
-
Do Not Copy VA912/b
Page 7
Correct Methods : Incorrect Methods :
Place the monitor on a clean & soft foam pad . Place the monitor on foreign objects .
Colors ( 6 bit + 2 bit FRC) 16.2 M colors
Response Time (Typ) 20 ms
Viewing Angle (H/V) 170 ° / 170 °
Recommend resolution 1280x1024@60Hz
Analog (75ohms, 0.7/1.0 Vp-p) Yes
Digital No
Separate Sync Yes
Composite Sync No
Sync on Green No
PC Yes
Power Mac Yes
TV Box (NextVision 6) Yes
On Mode(Max / Typ) 65W / 60W
Active Off Mode (Max) ≦3 W
Tilt ( 20° +-2°- -5°+-1.5°)
Swivel No
Pivot No
Height Adjust No
[; X] [ 1 ] [▼] [▲] [ 2 ] [
Physical (W x H x D mm) 424 x 442 x 186
Package (W x H x D mm) 480 x 524 x 228
Physical (Net kg/lb) 5.5kg/12.1lb
Package (Gross Kg/lb) 8.1kg/17.9lb
Temperature ( /)℉℃ 41℉-95 /℉ +5℃-+35℃
Humidity (%) 20 % - 80 %
Temperature ( /)℉℃ -4℉-131 /℉ -20℃-55℃
Humidity (%) 20 % - 85 %
UL, cUL, FCC-B, CB, CE, NOM, TUV/GS, TUV ERGO (covers ISO13406-2 &
MPRII), TCO99, GOST-R + 20 ORIGINAL COPIES HYGIENIC, SASO, PCBC,
VCCI, BSMI, CCC, (PSB), (C-TICK), TUV-S, Green Mark,
]
Yes
Yes
Chapter 2 Product definition and specification
Region VSA / VSAP(M)VSE(E)VSCN(G) VSJ(J)
Product Name VA912
Model Number VS10696
OSD Languages
English, French, German, Italian, Spanish, Finnish,
Japanese, Traditional Chinese, Simplified Chinese
ViewSonic Corporation Confidential
5
-
Do Not Copy VA912/b
Page 9
TFT LCD Panel and Model # Vendor : CMO, Model # : A190E2-xx6
Scalar Model # : Genesis 5126
Input Signal Analog
Sync Compatibility Separate
Audio 1.5W @ < 8 % distortion
Adapter 65 W (max) / 60W (typ)
Power Cable (1.8m, color: black, US type)
Power Cable
(1.8m, color: black, Schuko type)
Power Cable (1.8m, color: black, CCC type)
Power Cable (1.8m, color: black, PSE type)
Analog Cable (1.8 m, color : black), with PC 2001
and Hot Plug Detect &DDC
Audio Cable (1.8m, Color: black) with PC 2001
DVI Cable(1.8m, color: black) with PC 2001 NO NO NO NO
YES
NO
NO NO
NO NO NO
YES YES YES YES
YES YES YES YES
NO NO NO
YES
NO NO
YES
NO
YES
ViewSonic CD Wizard
ViewSonic Quick Start Guide
Screen Protector Mylar
Warranty Sticker NO NO
Warranty Card NO NO
Carton Sticker NO NO
PE bag of Carton NO NO
Arabic, English, Finnish, Spanish, German,
Italian, Japanese, Swedish, Polish, Korean
Portuguese, Russian, French, Simplified
Chinese, Traditional Chinese, Hungary, Czech
YES YES YES YES
YES
(Chinese)
YES
(Chinese)
YES
(Chinese)
YES
YES
(Japanese)
YES
(Japanese)
NO
NO
ViewSonic Corporation Confidential
6
-
Do Not Copy VA912/b
Page 10
Chapter 3 GENERAL specification
Test Resolution & Frequency 1280x1024 @ 60Hz
Test Image Size Full Size
Contrast and Brightness Controls
Chapter 4 VIDEO INTERFACE
Analog Input Connector DB-15 (Analog), refer the appendix A
Digital Input Connector N/A
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief Equal to twice the weight of the monitor for five minutes
Video Cable Connector DB-15 Pin out Compliant DDC 2B
Video Signals
Video Impedance 75 Ohms (Analog)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC 2B Compliant with Revision 1.3
Sync Compatibility Separate Sync
Shall be compatible with all PC type computers,
Macintosh computers, and after market video cards
640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x
600, 832 x 624, 1024 x 768, 1152 x 870, 1280 x 720,
1280 x 960, 1280 x 1024
* The image vertical size might not be full screen.
But the image vertical position should be at the center.
ViewSonic Corporation Confidential
7
-
Do Not Copy VA912/b
Page 11
Chapter 5 POWER SUPPLY
Power Supply (Adapter) Part Number: UP065B1190 or ADP-65MB
Input Voltage Range 90 TO 264 VAC
Input Frequency Range 47 TO 63 HERTZ
Short Circuit Protection Output can be shorted without damage
Over Current Protection 5.13 A typical at 18.1 VDC
Leakage Current 0.25mA (Max) at 264VAC / 50Hz
EFFICIENCY 80 % typical at 115VAC Full Load
Fuse Internal and not user replaceable
Power Dissipation 65 Watts
Max Input AC Current 1.8Arms @ 90VAC,
INRUSH CURRENT (COLD START) 100 A @ 240VAC , 50Hz
Shall start and function properly when under full load,
Power Supply Cold Start
Power Supply Transient Immunity
Power Supply Line Surge Immunity
Power Supply Missing Cycle Immunity
Power Supply Acoustics
US Type Power Cable
European Type Power Cable
CCC Type Power Cable
PSE Type Power Cable
Power Saving Operation(Method) VESA DPMS Signaling
Power Consumption
Recovery Time ON MODE = N/A, ACTIVE OFF < 5 SEC
Chapter 6 ELECTRICAL REQUIREMENT
with all combinations of input voltage, input frequency,
and operating temperature
Shall be able to withstand an EN61000-4-4 ±2KV
transient test with no damage
Shall be able to withstand ±2KV (L-L) and ±2.3KV (LPE) with no damage
Shall be able to function properly, without reset or visible
screen artifacts, when ½ cycle of AC power is randomly
missing at nominal input
The power supply shall not produce audible noise that
would be detectable by the user. Audible shall defined to
be in compliance with ISO 7779 (DIN EN27779:1991)
Noise measurements of machines acoustics. Power
Switch noise shall not be considered
Separate 3-prong NEMA 5-15P type plug. Length =
1.8m. Connects to display.
Color = Black
Schuko CEE7-7 type plug.
Length = 1.8m, Connects to display.
Color = Black
Separate 3-prong type plug.
Length = 1.8m. Connects to display.
Color = Black
Separate 2-prong NEMA 1-15P type plug. Length =
1.8m. Connects to display.
Color = Black
ON Mode < 65W (max) / 60W(typ)
ACTIVE OFF < 3W
Horizontal / Vertical Frequency
Horizontal Frequency 30 – 82 KHZ
Vertical Refresh Rate 50 – 85* HZ.
Maximum Pixel Clock 135 MHz
Sync Polarity Independent of sync polarity.
ViewSonic Corporation Confidential
8
-
Do Not Copy VA912/b
Page 12
Timing Table
Item Timing Analog
1 640 x 350 @ 70Hz, 31.5kHz Yes
2 640 x 400 @ 60Hz, 31.5kHz Yes
3 640 x 400 @ 70Hz, 31.5kHz Yes
4 640 x 480 @ 60Hz, 31.5kHz Yes
5 640 x 480 @ 67Hz, 35.0kHz Yes
6 640 x 480 @ 72Hz, 37.9kHz Yes
7 640 x 480 @ 75Hz, 37.5kHz Yes
8 640 x 480 @ 85Hz, 43.27kHz Yes
9 720 x 400 @ 70Hz, 31.5kHz Yes
10 800 x 600 @ 56Hz, 35.1kHz Yes
11 800 x 600 @ 60Hz, 37.9kHz Yes
12 800 x 600 @ 75Hz, 46.9kHz Yes
13 800 x 600 @ 72Hz, 48.1kHz Yes
14 800 x 600 @ 85Hz, 53.7kHz Yes
15 832 x 624 @ 75Hz, 49.7kHz Yes
16 1024 x 768 @ 60Hz, 48.4kHz Yes
17 1024 x 768 @ 70Hz, 56.5kHz Yes
18 1024 x 768 @ 72Hz, 58.1kHz Yes
19 1024 x 768 @ 75Hz, 60.0kHz Yes
20 1024 x 768 @ 85Hz, 68.67kHz Yes
21 1152 x 870 @ 75Hz, 68.7kHz Yes
22 1280 x 1024 @ 60Hz, 63.4kHz Yes
23 1280 x 1024 @ 75Hz, 79.97kHz Yes
24 1280x 720 @ 60Hz, 45kHz (HDTV) Yes
Note 1:When Vertical frequency at 85Hz or resolution, the vertical image size might not be full screen. But the
vertical image position should be at the center.
Colors ( 6 bit + 2 bit FRC) 16.2 M colors
Response Time (Typ) 20 ms
Viewing Angle (H/V) 170 ° / 170 °
Recommend resolution 1280x1024@60Hz
Analog (75ohms, 0.7/1.0 Vp-p) Yes
Digital Yes
Separate Sync Yes
Composite Sync No
Sync on Green No
PC Yes
Power Mac Yes
TV Box (NextVision 6) Yes
On Mode(Max / Typ) 65W / 60W
Active Off Mode (Max) ≦3 W
Tilt ( 20° +-2°- -5°+-1.5°)
Swivel No
Pivot No
Height Adjust No
[; X] [ 1 ] [▼] [▲] [ 2 ] [
Physical (W x H x D mm) 424 x 442 x 186
Package (W x H x D mm) 480 x 524 x 228
Physical (Net kg/lb) 5.5kg/12.1lb
Package (Gross Kg/lb) 8.1kg/17.9lb
Temperature ( /)℉℃ 41℉-95 /℉ +5℃-+35℃
Humidity (%) 20 % - 80 %
Temperature ( /)℉℃ -4℉-131 /℉ -20℃-55℃
Humidity (%) 20 % - 85 %
UL, cUL, FCC-B, CB, CE, NOM, TUV/GS, TUV ERGO (covers ISO13406-2 &
MPRII), TCO99, GOST-R + 20 ORIGINAL COPIES HYGIENIC, SASO, PCBC,
VCCI, BSMI, CCC, (PSB), (C-TICK), TUV-S, Green Mark,
]
Yes
Yes
Chapter 2 Product definition and specification
Region VSA / VSAP(M)VSE(E)VSCN(G) VSJ(J)
Product Name VA912/b
Model Number VS10696
OSD Languages
TFT LCD Panel and Model # Vendor : CMO, Model # : A190E2-xx6
Scalar Model # : Genesis 5126
English, French, German, Italian, Spanish, Finnish,
Japanese, Traditional Chinese, Simplified Chinese
ViewSonic Corporation Confidential
10
-
Do Not Copy VA912/b
Page 14
Input Signal
Sync Compatibility Separate
Audio 1.5W @ < 8 % distortion
Adapter 65 W (max) / 60W (typ)
Power Cable (1.8m, color: black, US type)
Power Cable
(1.8m, color: black, Schuko type)
Power Cable (1.8m, color: black, CCC type)
Power Cable (1.8m, color: black, PSE type)
Analog Cable (1.8 m, color : black), with PC 2001
and Hot Plug Detect &DDC
Audio Cable (1.8m, Color: black) with PC 2001
DVI Cable(1.8m, color: black) with PC 2001 NO NO NO NO
YES
NO
NO NO
NO NO NO
YES YES YES YES
YES YES YES YES
Analog
+ Digital
NO NO NO
YES
NO NO
YES
NO
YES
ViewSonic CD Wizard
ViewSonic Quick Start Guide
Screen Protector Mylar
Warranty Sticker NO NO
Warranty Card NO NO
Carton Sticker NO NO
PE bag of Carton NO NO
Arabic, English, Finnish, Spanish, German,
Italian, Japanese, Swedish, Polish, Korean
Portuguese, Russian, French, Simplified
Chinese, Traditional Chinese, Hungary, Czech
YES YES YES YES
YES
(Chinese)
YES
(Chinese)
YES
(Chinese)
YES
YES
(Japanese)
YES
(Japanese)
NO
NO
ViewSonic Corporation Confidential
11
-
Do Not Copy VA912/b
Page 15
Chapter 3 GENERAL specification
Test Resolution & Frequency 1280x1024 @ 60Hz
Test Image Size Full Size
Contrast and Brightness Controls
Chapter 4 VIDEO INTERFACE
Analog Input Connector DB-15 (Analog), refer the appendix A
Digital Input Connector DVI-D (Digital), refer the appendix B
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief Equal to twice the weight of the monitor for five minutes
Video Cable Connector DB-15 Pin out Compliant DDC 2B
Video Signals
Video Impedance 75 Ohms (Analog) , 100 Ohms (Digital)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC 2B Compliant with Revision 1.3
Sync Compatibility Separate Sync
Shall be compatible with all PC type computers,
Macintosh computers, and after market video cards
640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x
600, 832 x 624, 1024 x 768, 1152 x 870, 1280 x 720,
1280 x 960, 1280 x 1024
* The image vertical size might not be full screen.
But the image vertical position should be at the center.
ViewSonic Corporation Confidential
12
-
Do Not Copy VA912/b
Page 16
Chapter 5 POWER SUPPLY
Power Supply (Adapter) Part Number: UP065B1190 or ADP-65MB
Input Voltage Range 90 TO 264 VAC
Input Frequency Range 47 TO 63 HERTZ
Short Circuit Protection Output can be shorted without damage
Over Current Protection 5.13 A typical at 18.1 VDC
Leakage Current 0.25mA (Max) at 264VAC / 50Hz
EFFICIENCY 80 % typical at 115VAC Full Load
Fuse Internal and not user replaceable
Power Dissipation 65 Watts
Max Input AC Current 1.8Arms @ 90VAC,
INRUSH CURRENT (COLD START) 100 A @ 240VAC , 50Hz
Shall start and function properly when under full load,
Power Supply Cold Start
Power Supply Transient Immunity
Power Supply Line Surge Immunity
Power Supply Missing Cycle Immunity
Power Supply Acoustics
US Type Power Cable
European Type Power Cable
CCC Type Power Cable
PSE Type Power Cable
Power Saving Operation(Method) VESA DPMS Signaling
Power Consumption
Recovery Time ON MODE = N/A, ACTIVE OFF < 5 SEC
Chapter 6 ELECTRICAL REQUIREMENT
with all combinations of input voltage, input frequency,
and operating temperature
Shall be able to withstand an EN61000-4-4 ±2KV
transient test with no damage
Shall be able to withstand ±2KV (L-L) and ±2.3KV (LPE) with no damage
Shall be able to function properly, without reset or visible
screen artifacts, when ½ cycle of AC power is randomly
missing at nominal input
The power supply shall not produce audible noise that
would be detectable by the user. Audible shall defined to
be in compliance with ISO 7779 (DIN EN27779:1991)
Noise measurements of machines acoustics. Power
Switch noise shall not be considered
Separate 3-prong NEMA 5-15P type plug. Length =
1.8m. Connects to display.
Color = Black
Schuko CEE7-7 type plug.
Length = 1.8m, Connects to display.
Color = Black
Separate 3-prong type plug.
Length = 1.8m. Connects to display.
Color = Black
Separate 2-prong NEMA 1-15P type plug. Length =
1.8m. Connects to display.
Color = Black
ON Mode < 65W (max) / 60W(typ)
ACTIVE OFF < 3W
Horizontal / Vertical Frequency
Horizontal Frequency 30 – 82 KHZ
Vertical Refresh Rate 50 – 85* HZ.
Maximum Pixel Clock 135 MHz
Sync Polarity Independent of sync polarity.
ViewSonic Corporation Confidential
13
-
Do Not Copy VA912/b
Page 17
Chapter 7 Timing Table
Item Timing Analog Digital
1 640 x 350 @ 70Hz, 31.5kHz Yes Yes
2 640 x 400 @ 60Hz, 31.5kHz Yes Yes
3 640 x 400 @ 70Hz, 31.5kHz Yes Yes
4 640 x 480 @ 60Hz, 31.5kHz Yes Yes
5 640 x 480 @ 67Hz, 35.0kHz Yes Yes
6 640 x 480 @ 72Hz, 37.9kHz Yes Yes
7 640 x 480 @ 75Hz, 37.5kHz Yes Yes
8 640 x 480 @ 85Hz, 43.27kHz Yes Yes
9 720 x 400 @ 70Hz, 31.5kHz Yes Yes
10 800 x 600 @ 56Hz, 35.1kHz Yes Yes
11 800 x 600 @ 60Hz, 37.9kHz Yes Yes
12 800 x 600 @ 75Hz, 46.9kHz Yes Yes
13 800 x 600 @ 72Hz, 48.1kHz Yes Yes
14 800 x 600 @ 85Hz, 53.7kHz Yes Yes
15 832 x 624 @ 75Hz, 49.7kHz Yes Yes
16 1024 x 768 @ 60Hz, 48.4kHz Yes Yes
17 1024 x 768 @ 70Hz, 56.5kHz Yes Yes
18 1024 x 768 @ 72Hz, 58.1kHz Yes Yes
19 1024 x 768 @ 75Hz, 60.0kHz Yes Yes
20 1024 x 768 @ 85Hz, 68.67kHz Yes Yes
21 1152 x 870 @ 75Hz, 68.7kHz Yes Yes
22 1280 x 1024 @ 60Hz, 63.4kHz Yes Yes
23 1280 x 1024 @ 75Hz, 79.97kHz Yes No
24 1280x 720 @ 60Hz, 45kHz (HDTV) Yes Yes
Note 1:When Vertical frequency at 85Hz or resolution, the vertical image size might not be full screen. But the
vertical image position should be at the center.
Note 2: Out of scalar chip (gm5126) limit.
ViewSonic Corporation Confidential
14
-
Do Not Copy VA912/b
Page 18
Chapter 3GENERAL specification
Test Resolution & Frequency 1280x1024 @ 60Hz
Test Image Size Full Size
Contrast and Brightness Controls
Chapter 4VIDEO INTERFACE
Analog Input Connector DB-15 (Analog), refer the appendix A
Digital Input Connector N/A
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief Equal to twice the weight of the monitor for five minutes
Video Cable Connector DB-15 Pin out Compliant DDC 2B
Video Signals
Video Impedance 75 Ohms (Analog)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC 2B Compliant with Revision 1.3
Sync Compatibility Separate Sync
Shall be compatible with all PC type computers,
Macintosh computers, and after market video cards
640 x 350*, 640 x 480, 720 x 400* (640 x 400*), 800 x
600, 832 x 624, 1024 x 768, 1152 x 870, 1280 x 720,
1280 x 960, 1280 x 1024
* The image vertical size might not be full screen.
But the image vertical position should be at the center.
ViewSonic Corporation Confidential
15
-
Do Not Copy VA912/b
Page 19
Chapter 5 POWER SUPPLY
Power Supply (Adapter) Part Number: UP060B1190 or DA-60F19
Input Voltage Range 90 TO 264 VAC
Input Frequency Range 47 TO 63 HERTZ
Short Circuit Protection Output can be shorted without damage
Over Current Protection 3.476~4.74 A typical at 18.05 VDC
Leakage Current 0.25mA (Max) at 264VAC / 60Hz
EFFICIENCY 80 % typical at 115VAC Full Load
Fuse Internal and not user replaceable
Power Dissipation 60 Watts (max) / 51 Watts (typ)
Max Input AC Current 1.6Arms @ 90VAC,
INRUSH CURRENT (COLD START) 80 A @ 120VAC, 80 A(max) @220VAC
Shall start and function properly when under full load,
Power Supply Cold Start
Power Supply Transient Immunity
Power Supply Line Surge Immunity
Power Supply Missing Cycle Immunity
Power Supply Acoustics
US Type Power Cable
European Type Power Cable
CCC Type Power Cable
PSE Type Power Cable
Power Saving Operation(Method) VESA DPMS Signaling
Power Consumption
Recovery Time ON MODE = N/A, ACTIVE OFF < 5 SEC
Chapter 6 ELECTRICAL REQUIREMENT
with all combinations of input voltage, input frequency,
and operating temperature
Shall be able to withstand an EN61000-4-4 ±2KV
transient test with no damage
Shall be able to withstand ±2KV (L-L) and ±2.3KV (LPE) with no damage
Shall be able to function properly, without reset or visible
screen artifacts, when ½ cycle of AC power is randomly
missing at nominal input
The power supply shall not produce audible noise that
would be detectable by the user. Audible shall defined to
be in compliance with ISO 7779 (DIN EN27779:1991)
Noise measurements of machines acoustics. Power Switch
noise shall not be considered
Separate 3-prong NEMA 5-15P type plug. Length =
1.8m. Connects to display.
Color = Black
Schuko CEE7-7 type plug.
Length = 1.8m, Connects to display.
Color = Black
Separate 3-prong type plug.
Length = 1.8m. Connects to display.
Color = Black
Separate 2-prong NEMA 1-15P type plug. Length =
1.8m. Connects to display.
Color = Black
ON Mode < 60W (max) / 51W(typ)
ACTIVE OFF < 3W
Horizontal / Vertical Frequency
Horizontal Frequency 30 – 82 KHZ
Vertical Refresh Rate 50 – 85* HZ.
Maximum Pixel Clock 135 MHz
Sync Polarity Independent of sync polarity.
ViewSonic Corporation Confidential
16
-
Do Not Copy VA912/b
Page 20
Chapter 7Timing Table
Item Timing Analog
1 640 x 350 @ 70Hz, 31.5kHz Yes
2 640 x 400 @ 60Hz, 31.5kHz Yes
3 640 x 400 @ 70Hz, 31.5kHz Yes
5 640 x 480 @ 60Hz, 31.5kHz Yes
6 640 x 480 @ 67Hz, 35.0kHz Yes
7 640 x 480 @ 72Hz, 37.9kHz Yes
8 640 x 480 @ 75Hz, 37.5kHz Yes
9 640 x 480 @ 85Hz, 43.27kHz Yes
10 720 x 400 @ 70Hz, 31.5kHz Yes
11 800 x 600 @ 56Hz, 35.1kHz Yes
12 800 x 600 @ 60Hz, 37.9kHz Yes
13 800 x 600 @ 75Hz, 46.9kHz Yes
14 800 x 600 @ 72Hz, 48.1kHz Yes
15 800 x 600 @ 85Hz, 53.7kHz Yes
16 832 x 624 @ 75Hz, 49.7kHz Yes
17 1024 x 768 @ 60Hz, 48.4kHz Yes
18 1024 x 768 @ 70Hz, 56.5kHz Yes
19 1024 x 768 @ 72Hz, 58.1kHz Yes
20 1024 x 768 @ 75Hz, 60.0kHz Yes
21 1024 x 768 @ 85Hz, 68.67kHz Yes
22 1152 x 870 @ 75Hz, 68.7kHz Yes
23 1280 x 1024 @ 60Hz, 63.4kHz Yes
24 1280 x 1024 @ 75Hz, 79.97kHz Yes
25 1280x 720 @ 60Hz, 45kHz (HDTV) Yes
Note 1:When Vertical frequency at 85Hz or resolution, the vertical image size might
not be full screen. But the vertical image position should be at the center.
Note 2: Out of scalar chip (gm5126) limit.
ViewSonic Corporation Confidential
17
-
Do Not Copy VA912/b
Page 21
3. Front Panel Function Control Description
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OnView® controls which
display on the screen. The OnView controls are explained at the top of the next page and are
defined in “Main Menu Controls” on page 20.
Main Menu
with OnView controls
Front Control Panel
shown below in detail
Displays the Main Menu or
exits the control screen and
saves adjustments.
Audio Mute
button turns
the sound off
Scrolls through menu options and
adjusts the displayed control.
Also a shortcut to display the Contrast
adjustment control screen.
Displays the control screen
for the highlighted control.
Also toggles between two
controls on some screens.
Power light
Green = ON
Orange = Power Saving
Standby Power
On/Off
ViewSonic Corporation Confidential
18
-
Do Not Copy VA912/b
Page 22
Do the following to adjust the screen image:
1. To display the Main Menu, press button [1].
NOTE: All OnView menus and adjustment screens disappear automatically after about 15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2. To select a control you want to adjust, press S or T to scroll up or down the Main Menu.
3. After the control is selected, press button [2]. A control screen like the one shown below
appears.
The command line at the bottom of the
control screen tells what to do next from
this screen. You can toggle between control
screens, adjust the selected option, or exit
the screen.
4. To adjust the control, press the up S or down T buttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60Hz
to the LCD display. (Look for instructions on “changing the refresh rate” in your graphic
card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible. (The black border around the edge of the screen should
barely touch the illuminated “active area” of the LCD display.)
ViewSonic Corporation Confidential
19
-
Do Not Copy VA912/b
Page 23
Main Menu Controls
Adjust the menu items shown below by using the up S and down T buttons.
ControlExplanation
Auto Image Adjust sizes and centers the screen image automatically.
Contrast adjusts the difference between the image background (black level)
and the foreground (white level).
Brightness adjusts background black level of the screen image.
Audio Adjust
Vol um e increases the volume, decreases the volume, and mutes the audio.
Mute temporarily silences audio output.
Color Adjust provides several color adjustment modes: preset color
temperatures and RGB which allows you to adjust red (R), green (G), and blue
(B) separately. The factory setting for this product is 6500K (6500 Kelvin).
9300K-Adds blue to the screen image for cooler white (used in most office
settings with fluorescent lighting).
6500K-Adds red to the screen image for warmer white and richer red.
5400K-Adds green to the screen image for a darker color.
5000K-Adds blue and green to the screen image for a darker color.
User Color Individual adjustments for red (R), green (G), and blue (B).
1. To select color (R, G or B) press button [2].
2. To adjust selected color, pressSandT.
Important: If you select RECALL from the Main Menu when the product is set
to a Preset Timing Mode, colors return to the 6500K factory preset.
ViewSonic Corporation Confidential
20
-
Do Not Copy VA912/b
Page 24
ControlExplanation
Information displays the timing mode (video signal input) coming from the
graphics card in your computer, the LCD model number, the serial number, and
the ViewSonic website URL. See your graphic cards user guide for instructions
on changing the resolution and refresh rate (vertical frequency).
NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution
is 1280 x 1024 and the refresh rate is 60 Hertz.
Manual Image Adjust Sub-menu
H. Size (Horizontal Size) adjusts the width of the screen image.
H./V. Position (Horizontal/Vertical Position) moves the screen image left or
right and up or down.
Fine Tune sharpens the focus by aligning the text and/or graphic characters.
NOTE: Try Auto Image Adjust first.
Sharpness adjusts the clarity and focus of the screen image.
ViewSonic Corporation Confidential
21
-
Do Not Copy VA912/b
Page 25
ControlExplanation
Setup menu displays the menu shown below:
Language allows you to choose the language used in the menus and control
screens.
Resolution Notice allows you to enable or disable this notice.
If you enable the Resolution Notice shown above and your computer is set at a
resolution other than 1280 x 1024, the following screen appears.
OSD Position allows you to move the on-screen display menus and control
screens.
OSD Timeout sets the length of time the on-screen display screen is displayed.
For example, with a “30 second” setting, if a control is not pushed within 30
seconds, the display screen disappears.
OSD Background On/Off allows you to turn the On-Screen Display
background On or Off.
Memory Recall returns the adjustments back to factory settings if the display is
operating in a factory Preset Timing Mode listed in the Specifications of this
manual.
ViewSonic Corporation Confidential
22
-
Do Not Copy VA912/b
Page 26
Hot Keys for Function Controls
[1] Main Menu
[2] Input toggle (Analog or Digital) or Auto Image Adjust.
[▼] or [▲] To immediately activate Contrast menu. It should be change to Brightness
[▼] + [▲] Recall both of Contrast and Brightness to default
[1] + [2] Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
[1] + [▼] + [▲] White Balance. (Not shown on user’s guide)
[1] + [▼] Power Lock
[1] + [▲] OSD Lock
OSD by push button [2]
mode
1. Turn off [Power on/off] button.
2. Press [▲] + [▼] + [Power
All Mode Reset. It will erase all end users’ setting and restore the factory
defaults.
on/off] at same time
3. Press [1]
Remark : All the short cuts function are only available while OSD off
Hot Keys for Factory Control
3. Turn off [Power on/off] button.
4. Press [▲] + [▼] + [Power on/off] at same time
5. Press [1]
Then you will see the BIOS update picture show in the screen as below.
ViewSonic Corporation Confidential
23
-
Do Not Copy VA912/b
Page 27
4. Circuit Description
Circuit Description
1. Power supply (DC/DC Converter)
The AT1741 is 2-channel PWM switching regulator controllers that contains an
on-chip 2.5V reference, two error amplifier, an adjustable oscillator, two
dead-time comparators, under voltage lockout circuitry and 2 common-emitter
output. It is idea for step-up, step-down, and inverting converter.
ViewSonic Corporation Confidential
24
-
Do Not Copy VA912/b
Page 28
2. Flash Memory
The F29C51001T/F29C51001B is a 1 Megabit, 5.0 Volt-only Flash Memory organized as 131,072
bytes of 8 bits each. This device is designed to use a 4.7 Volt to 5.3 Volt power supply to perform
in-system programming.
The 1 Megabit memory array is divided into thirty-two uniform blocks of 4 Kbytes each for data and/or
code storage.
The block architecture allows users to flexibly make chip erase or block erase operation. The block
erase feature allows a particular block to be erased and reprogrammed without affecting the data in
other blocks. After the device performs chip erase or block erase operation, it can be reprogrammed on
a byte-by-byte basis.
ViewSonic Corporation Confidential
25
-
Do Not Copy VA912/b
Page 29
3. GM5120
The gm5116/26 is a graphic processing IC for Liquid Crystal Display (LCD) monitors at XGA/SXGA
resolution. It provides all key IC functions required for the highest quality LCD monitors. On-chip
functions include a high-speed triple-ADC and PLL, Ultra-Reliable DVI
zoom and shrink scaling engine, an on-screen display (OSD) controller, digital color controls and an
on-chip microcontroller (OCM). With this level of integration, the gm5116/26 devices simplify and
reduce the cost of LCD monitors while maintaining a high-degree of flexibility and quality.
TM
receiver, a high quality
4. LVDS (THC63LVDM83A)
The THC63LVDM83A transmitter converts 28 bits of CMOS/TTL data into LVDS (Low Voltage
Differential Signaling) data stream. A phase-locked transmit clock is transmitted in parallel with the
data streams over a fifth LVDS link. The HC63LVDM83A can be programmed for rising edge or
falling edge clocks through a dedicated pin. The THC63LVDF84A receiver converts the LVDS data
streams back into 28 bits of CMOS/TTL data with falling edge clock. At a transmit clock frequency of
85MHz, 24 bits of RGB data and 4 bits of LCD timing and control data (HSYNC, VSYNC, CNTL1,
CNTL2) are transmitted at a rate of 595 Mbps per LVDS data channel.
ViewSonic Corporation Confidential
26
-
Do Not Copy VA912/b
Page 30
5. Adjustment Procedure
5-1 Function Test and Alignment Procedure
1. All Modes Reset
You should do “All Model Reset” (Refer to Chap 3. Hot Keys for Function Controls) first. This
action will allow you to erase all end-user’s settings and restore the factory defaults.
2. Auto Image Adjust
The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen
quality, the user has to adjust each function manually.
A.Turn the computer and LCD monitor on.
B. Press the ‘Auto’ button on monitor keypad to Auto Adjust.
C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive
seconds, during which time you will notice the image change.
3. Firmware
Test Patten : Burn in Model (Refer to Chap3. Hot Keys for Function Control)
-Make sure the F/W is the latest version.
4. DCC
Test Patten: EDID program
-Make sure it can pass test program.
5. Window Shut Down
Test Signal: 1280*1024@60Hz
Test Pattern:
Checkered Pattern Every One Pixel (50%Green & 50%Blue)
Inspection Item: Flicker, Mura
6. Window BG
Test Signal: 1280*1024@60Hz
Test Pattern:
Window standard pattern
Inspection Item: Line Defect, Function Defect & Mura
ViewSonic Corporation Confidential
27
-
Do Not Copy VA912/b
Page 31
7. 25 Gray
Test Signal: 1280*1024@60Hz
Test Pattern:
Full Screen 25% White (Gray)
Inspection Item: Particle, Line Defect & Mura
8. 50 Gray
Test Signal: 1280*1024@60Hz
Test Pattern:
Full Screen 50% White (Gray)
Inspection Item: Bright Dot, Particle, Line Defect & Mura
9. White Box
Test Signal: 1280*1024@60Hz
Test Pattern:
Window standard pattern
Inspection Item: Particle, Line Defect, Power, Image Remain & Mura
10. Black Box
Test Signal: 1280*1024@60Hz
Test Pattern:
Window standard pattern
Inspection Item: Bright Dot, Line Defect & Power
ViewSonic Corporation Confidential
28
-
Do Not Copy VA912/b
Page 32
11. RED
Test Signal: 1280*1024@60Hz
Test Pattern:
Full Screen Red
Inspection Item: Bright Dot, Partial & Line Defect
12. Green
Test Signal: 1280*1024@60Hz
Test Pattern:
Full Screen Green
Inspection Item: Bright Dot, Partial & Line Defect
13. Blue
Test Signal: 1280*1024@60Hz
Test Pattern:
Full Screen Green
Inspection Item: Bright Dot, Partial & Line Defect
14. Gray_Scale_0-100_V256
Test Signal: 1280*1024@60Hz
Test Pattern:
Vertical 64 (256) Gray Scale (Right → Left,From 0 to 100% White)
Inspection Item: Line Defect & Function Defect
ViewSonic Corporation Confidential
29
-
Do Not Copy VA912/b
Page 33
16. Gray_Scale_0-100_H256
Test Signal: 1280*1024@60Hz
Test Pattern:
Horizontal 64(256) Gray Scale (Up → Down,From 0 to 100% White)
Inspection Item: Line Defect & Function Defect
16. Block Window
Test Signal: 1280*1024@60Hz
Test Pattern:
Black block at the center
Inspection Item: Cross Talk & Optical Character
17. Black_Tile
Test Signal: 1280*1024@60Hz
Test Pattern:
Black tile under white background
Inspection Item: Function Defect & Image Remain
ViewSonic Corporation Confidential
30
-
Do Not Copy VA912/b
Page 34
5-2 Function Test Display pattern
Item
1
2
3
4
5
6
7
8
Gray_Scale_0-100_V
Gray_Scale_0-100_H
Pattern Description Remark
Vertical 64 (256) Gray Scale (right→left,ffrom 0
Figure 1
to 100% White)
Horizontal 64 (256) Gray Scale (up →down,From
Figure 2
0 to 100% White)
Black Full Screen Black Figure 3
Red Full Screen 50% Red Figure 4
Green Full Screen 50% Green Figure 5
Blue Full Screen 50% Blue Figure6
White Full Screen White Figure7
Black_Tile Black Tile Under White Background Figure 8
Figure 1 Figure 2
Figure 4 Figure 3
ViewSonic Corporation Confidential
31
-
Do Not Copy VA912/b
Page 35
Figure 5
Figure 6 Figure 5
Figure 8 Figure 7
ViewSonic Corporation Confidential
32
-
Do Not Copy VA912/b
Page 36
5-3 Function Test and Alignment Procedure
1. All Modes Reset
You should do “All Model Reset” (Refer to Chap 3. Hot Keys for Function Controls) first. This
action will allow you to erase all end-user’s settings and restore the factory defaults.
2. Auto Image Adjust
The Auto Adjust is aimed to offer a best screen quality by built-in ASIC. For optimum screen
quality, the user has to adjust each function manually.
A.Turn the computer and LCD monitor on.
B. Press the ‘Auto’ button on monitor keypad to Auto Adjust.
C. The LCD monitor will start the Auto Adjust process automatically and run for 10 consecutive
seconds, during which time you will notice the image change.
3. Firmware
Test Patten : Burn in Model (Refer to Chap3. Hot Keys for Function Control)
-Make sure the F/W is the latest version.
4. DCC
Test Patten: EDID program
-Make sure it can pass test program.
5. Window Shut Down
Test Signal: 1280*1024@60Hz
Test Pattern:
6. BIOS update procedure
BIOS Update User Guide
For ViewSonic
ViewSonic Corporation Confidential
33
-
Do Not Copy VA912/b
Page 37
BIOS Update Flow for Genesis
1.1 Program:
1. 1. 1. Software
a. Please download the file “ Genesis” from CMO E-Sir system. There are ISP & BIOS two
files, kindly see as below.
a) ISPACK.EXE: Main program
GProbe4.2.0.3.exe
b) Ancillary .ISPACK.EXE :Description program
1.1. 2.Hardware
•RS232 cable(9 Pin)
•D_Sub cable(15Pin)
•12V Power supply
•RS232 to D_Sub transfer BD
PC optional
GProbe4.2.0.3_gm5126.exe
12V
ViewSonic Corporation Confidential
34
RS232 to PC
-
Do Not Copy VA912/b
Page 38
1.1.3 Join R232, monitor cable, and adapter. Detail, see the example picture as below.
Connect PC
Connect to adapter +12v
VGA
Cable
Connect monitor
ViewSonic Corporation Confidential
35
-
Do Not Copy VA912/b
Page 39
1.2 Installation:
A. Please install the programs respectively as below.
GProbe4.2.0.3.exe
Before Setup produce GProbe 4 file . Please set at ISP & BIOS software file.
B. I S & BIOS software file to be about to produce the next. (If the file existence
already,
1.3 ISP Execution
repeat.) This system is applied to Win 95/98/NT/2000.
ISP.GProbe
Gprobe.exe
GProbe4.2.0.3_gm5126.exe
:ISP exe.Main program
: Drive write file.
Pre.txt
: Drive read file.
Readme.txt
: Ancillary file.
5126bc14.dev
Please copy all the files above to the same directory
ViewSonic Corporation Confidential
36
-
Do Not Copy VA912/b
Page 40
1. Open ISP.Gprobe while parameters set up have been completed.
ISP.GProbe
2. You will see the picture as below.
ViewSonic Corporation Confidential
37
-
Do Not Copy VA912/b
Page 41
program execution
3. Execute the main program (Grope).
Choose the item for
parameter link while
4. Please follow up the parameter set up shown as below :
SERIAL1
COM1
115200
ViewSonic Corporation Confidential
38
-
Do Not Copy VA912/b
Page 42
5. Select “gm5126AA_AB”
Select
“ gm5126AA_AB”
ViewSonic Corporation Confidential
39
-
Do Not Copy VA912/b
Page 43
execute ISP while the
6. Execute Pre.txt:Input BATCH PRE.TXT
The system can
words show up
Input “ BATCH
PRE.TXT”
If appear line 3 is OK,
Appear line 2 is Error.
Please check wiring.
ViewSonic Corporation Confidential
40
-
Do Not Copy VA912/b
Page 44
which you want here.
7. Please check the entity connection and execute Gprobe 4 again once Debug Mode did not show up
ISP Program execution:Input BATCH ( update of BIOS Rev) .TXT
Key “BIOS Rev.”
This is the “BIOS
update total
spending time”.
※ If failed, Please don’t turn off power. Repeat do it again, from step 6 to step 7.
8. When everything is done. Please turn off the power and restart it again.
Check Factory Mode and make sure it already be updated.
17E1HG3004
ViewSonic Corporation Confidential
41
-
Do Not Copy VA912/b
Page 45
Check PCB
Check Panel
Particle
Check PCB
Check PCB
Check Panel
Next Step
6. Troubleshooting Flow Chart
Defect Mode Failure Analysis Repair Testing
Light On Test
※ Panel Change” Should be Performed to Level 3 Repair stage
Abnormal
Display
Missing Line
Bright Dot
Dark Dot
Backlight
Light Leakage
Mura
Image Sticking
Brightness spot
Dot Defect
Check Panel
AD/B Change
Panel Change
Panel Change
A
No display
Noise
Check Panel
Check Wire
AD/B Change
P/B Change
CNT/B Change
Panel Change
D-sub cable
change
AD/B Change
Panel Change
N
TEST
Completed
ViewSonic Corporation Confidential
42
-
Do Not Copy VA912/b
Page 46
Check PCB
Check Panel
a
bnormal
Check PCB
Check Panel
Down
Check PCB
Check Panel
No signal
Check PCB
Check PCB
Check Panel
Check PCB
Check Panel
change
Next Step
Defect Mode Failure Analysis Repair Testing
A
“ Panel Chan
Flicker
Gray value
display
R.G.B display
Display Shut
AD/B Change
P/B Change
Panel Change
AD/B Change
Panel Change
AD/B Change
CNT/B Change
Panel Change
D-sub cable
Check Wire
AD/B Change
Power on
Display
abnormal
P/B Change
Panel Change
AD/B Change
CNT/B Change
Check Wire
D-sub cable change
AD/B Change
Panel Change
NG
TEST
Completed
ViewSonic Corporation Confidential
43
-
Do Not Copy VA912/b
Page 47
Defect Mode Failure Analysis Repair Testing
LED Off
Check PCB
No Power
Check PCB
Cable change
Next Step
Unavailable
LED Dark
LED Abnormal
LED Flicker
※ “ Panel Change” Should be Performed to Level 3 Repair stage
ON/OF
Abnormal
LED display
abnormal
Check Wire
AD/B Change
P/B Change
CNT/B Change
PW cable Change
OSD cable Change
AD/B Change
P/B Change
OSD cable Change
Abnormal
Keyboard
Check Wire
Check PCB
Check Wire
Power wire connector
AD/B Change
P/B Change
OSD cable Change
NG
TEST
Completed
ViewSonic Corporation Confidential
44
-
Do Not Copy VA912/b
Page 48
Can’t Input
Can’t Reader
Check PCB
Check Panel
Check
Panel
Next Step
&OSD
Defect Mode Failure Analysis Repair Testing
※ “ Panel Change” Should be Performed to Level 3 Repair stage
Abnormal BIOS
Other Abnormal
Display
Display Shut
Down
Display flicker
Check PCB
Check Wire
Check PCB
AD/B Change
CNT/B Change
D-sub cable change
AD/B Change
P/B Change
CNT/B Change
Panel Change
AD/B Change
(tapping )
CNT/B Change
P/B Change
NG
TEST
Completed
ViewSonic Corporation Confidential
45
-
Do Not Copy VA912/b
Page 49
u Trouble Shooting Analysis
Check the information in this section to see if the problems can be solved before requesting repair.
Note:The consumers are only allowed to solve the problems described as below. Any unauthorized product
modification, or failure to follow instructions supplied with the product will end the warranty immediately.
l No image
- Make sure power button is ON.
- Check whether the LCD monitor and computer power cords are plugged and whether there is a supply of
power.
l No Signal Input
- Check the signal connection between the computer and LCD monitor.
l “Out of Range”
- Check the computer image output resolution and frequency and compare the value with the preset values
(Please refer to [Appendix-Display Mode]).
l Fuzzy Image
- Adjust Phase.
l Image too bright
- Adjust brightness and contrast by OSD.
l Image too dark
- Adjust brightness and contrast by OSD.
l Irregular image
- Check the signal connection between the computer and LCD monitor.
- Perform Auto Adjust.
l Distorted image
- Reset the LCD monitor
- Take off extra accessories (such as signal extension cord).
l Image is not centered
- Use OSD Image Menu to adjust H_Position and V_Position.
- Check image size setting.
- Perform Auto Adjust.
l Size is not appropriate
- Use OSD Image Menu to adjust H_Position and V_Position.
- Check image size setting.
- Perform Auto Adjust.
l Uneven color
- Use OSD Color Menu to adjust color setting.
l Color too dark
- Use OSD Color Menu to adjust color setting.
l Dark area distorted
- Use OSD Color Menu to adjust color setting.
l White color is not white
- Use OSD Color Menu to adjust color setting.
ViewSonic Corporation Confidential
46
-
Do Not Copy VA912/b
Page 50
7. Recommended Spare Parts List
ViewSonic Model Number: VS10696
RECOMMENDED SPARE PARTS LIST (VA912-1)
Rev: 1a
ItemECR/ECN ViewSonic P/N
Accessories:
1
2
3
4
5
6
Board Assembly:
7
8
9
Cabinets:
10
11
12
13
14
Cables:
15
16
17
18
19
20
Documentation:
21
22
23
24
Packing Material:
25
26
27
28
29
30
Adapter, UP06511190-08B, 19 V, 3.42 A, 65 W, Black,
Potrans, Two BC
Power Cord, BSI, H05VV-F, 0.75mm2, 3C, LP-60L+LS60, L=1830+/-50mm, Black, 18AWG, PSB Mark, Linetek,
No Bag
Power Cord, CCC, 300/500V, 0.75mm2, 3C, PC323+COC-01, L=1830+/-50mm, Black, Linetek, 18AWG,
No Bag
Power Cord, CEE, SP-023+IS-14, H05VV-F, 3G,
0.75mm2, CT-12, L=1800+/-50mm, I-SHENG, 18AWG,
Black, No Bag
Power Cord, JIS, VCTF, 0.75mm2, 3C, LP54+LS-13J,
L=1830+/-50mm, Black, Linetek, 18AWG, No Bag
Power Cord, UL, SVT#18/3C, 75 Celsius degree, LP30B+LS-13, L=1830+/-50mm, Black, Linetek, 18AWG,
No Bag
SUB),A190E2,Ver.VSCCF1BA00,ViewSonic,Checksum(E
A),Analog Port
Software
(EDID_DVI),A190E2,Ver.VSCCF1BD00,ViewSonic,Chec
ksum(9A),DVI Port
Software(BIOS),A190E2,Ver.NR19E2TGxx08,CMC,Analo
g+Audio,Taiwan,CheckSum(0008)
Olympic,19",Accessory BOM,Dsub+DVI+Audio,European / Korea 2 pin,Black,For VSC
Olympic,19",Accessory BOM,D-sub+DVI+Audio,Japan 2
pin,Black,For VSC
Olympic,19",Accessory BOM,D-sub+DVI+Audio,UK / HK
3 pin,Black,For VSC
Audio Cable,A150X2,18AWG,180cm,Black,JCEAUDIO1
Power Code,UL,SVT#18/3C,75,LP-30B+LS-13,L=1830+/50mm,Black,Linetek,18AWG,No Bag
Power Code,UL,SVT#18/3C,75,LP-30B+LS-13,L=1830+/50mm,Black,Linetek,18AWG,No Bag
Power Cord,CCC,300/500V,0.75mm2,3C,PC-323+COC01,L=1830+/-50mm,Black,Linetek,18AWG,,No Bag
Power Code,CEE,SP-023+IS-14,H05VVF,3G,0.75mm2,CT-12,L=1800+/-50mm,ISHENG,18AWG,Black,No Bag
Power Code,JIS,VCTF,0.75mm2,3C,LP54+LS13J,L=1830+/-50mm,Black,Linetek,18AWG,No Bag
Power Cord,BSI,H05VV-F,0.75mm2,3C,LP-60L+LS60,L=1830+/-50mm,Black,18AWG,PSB Mark,Linetek,No
Bag
Adaptor(AC/DC),65W/19V/3.42A,UP0651119008B,POTRANS(Black),Two BC
Monitor Cable,A150X2,30AWG,180cm,Black,JCEDSUB1
DVI CABLE,DVI-D(M) TO DVID(M),S/L,1.8M,W/2F,JCE,BLACK
SUB),A190E2,Ver.VSCC71BA00,ViewSonic
,Checksum(3E),Analog Port
Software(BIOS),A190E2,Ver.NR19E2TGxx0
ALL
7,CMC,Analog+Audio,Taiwan,CheckSum(00
07)
Bezel Assy,A190E2-H06,ASSY,Pantone
ALL
877C silver,Fuking
ALL
Protector Film-Panel,PET,M190E21
ALL
Label,Bar-Code Labe,55*13mm1
ALL
Safety Label,A190E2-H06,118 mm,49 mm1
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912
SN Label for ,A190E2-H06,50 mmx20
mm,VSC_VA912_for China
MENU for VSC_VA912+Caution Card_for
USA,Complex,4C,Yi-Ching Special
Printing,A190E2-H06
MENU forVSC(VA912),Complex,4C
D21
D11
CN3,CN22
SW1,SW2,SW3,SW4,SW5,SW
6
EDD1
BIS1
MENU1
MENU
1
1
1
1
1
4
1
1
6
1
1
1
1
168
169
170
171
173
174
ViewSonic Corporation Confidential
DC-0000237276-D000120
DC-0000237276-D000120
DC-0000237276-D000120
DC-0000237276-D000120
#N/A78-D000275
#N/A77-D000114
#N/A77-D000118
#N/A7841919921
P-0000207078-D000337
AJ0E2T1J26
AJ0E2T1C26
AJ0E2T1K26
AJ0E2T2A26
AJ0E2T1C26
AJ0E2T1C26
AJ0E2T1C26
ALL
ALL
MENU forVSC(VA912),Complex,4C
MENU forVSC(VA912),Complex,4C
MENU forVSC(VA912),Complex,4C
MENU forVSC(VA912),Complex,4C
Warranty Card,A170E1-H0G,143 mmx210
mm,VSC_VA712
Customer Label,A170E1-H0G,180 mm,100
mm
Customer Label,A170E1-H0G,130 mm,80
mm
PE Foam
Bag,Protector,570*600*0.13,A190E1H01,white
Inner Box,A170E1-H0G,454 mmx160
mmx43 mm,Yuen Foong Yu,Inner Box
sub+Audio,European / Korea 2 pin,Black,For
VSC
Olympic,19",Accessory BOM,Dsub+Audio,Japan 2 pin,Black,For VSC
Olympic,19",Accessory BOM,Dsub+Audio,China 3 pin,Black,For VSC
Olympic,19",Accessory BOM,Dsub+Audio,UK / HK 3 pin,Black,For VSC
Audio
Cable,A150X2,18AWG,180cm,Black,JCE
Power Code,UL,SVT#18/3C,75,LP-30B+LS13,L=1830+/50mm,Black,Linetek,18AWG,No Bag
Power Code,UL,SVT#18/3C,75,LP-30B+LS13,L=1830+/50mm,Black,Linetek,18AWG,No Bag
Power Code,CEE,SP-023+IS-14,H05VVF,3G,0.75mm2,CT-12,L=1800+/-50mm,ISHENG,18AWG,Black,No Bag
Power
Code,JIS,VCTF,0.75mm2,3C,LP54+LS13J,L=1830+/50mm,Black,Linetek,18AWG,No Bag
Power Cord,BSI,H05VV-F,0.75mm2,3C,LP60L+LS-60,L=1830+/50mm,Black,18AWG,PSB Mark,Linetek,No
Bag
Adaptor(AC/DC),65W/19V/3.42A,UP065111
90-08B,POTRANS(Black),Two BC
Monitor
Cable,A150X2,30AWG,180cm,Black,JCE
SUB),A190E2,Ver.VSCCF1BA00,ViewSonic,Chec
ksum(EA),Analog Port
Software
(EDID_DVI),A190E2,Ver.VSCCF1BD00,ViewSon
ic,Checksum(9A),DVI Port
Software(BIOS),A190E2,Ver.NR19E2TGxx08,CM
C,Analog+Audio,Taiwan,CheckSum(0008)
FFC-OSD,A190E2H01,15Pin,90mm*14mm,Pitch=1.0mm
Bezel Assy,A190E2-H06,ASSY,H93828B5
Midnight Gray,Fuking
Protector Film-Panel,PET,M190E21
Label,Bar-Code Labe,55*13mm1
Safety Label for ,A190E2-H06,118 mmx49
mm,VSC(VA912b)
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912b
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912b
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912b
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912b
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912b
SN Label for ,A190E2-H06,50 mmx25
mm,VSC_VA912b_for China
MENU for VSC_VA912b+Caution Card_for
USA,Complex,4C,Yi-Ching Special
Printing,A190E2-H06
MENU for
VSC_VA912b,Complex,4C,CMO_Maker,A190E2H06
MENU for
VSC_VA912b,Complex,4C,CMO_Maker,A190E2H06
MENU for
VSC_VA912b,Complex,4C,CMO_Maker,A190E2H06
MENU for
VSC_VA912b,Complex,4C,CMO_Maker,A190E2H06
MENU for
VSC_VA912b,Complex,4C,CMO_Maker,A190E2H06
PE Foam Bag,Protector,570*600*0.13,A190E1H01,white
Pallet,A150X1-T01,Wooden,1150 mmx970
mmx135 mm
Corner Protector,50*50*1850(mm)0.118
Label,Pallet Barcode Label,75x40,A190E2H03,VSC
Carton Label for ,A190E2-06,76.2 mmx76.2
mm,VSC(VA912b)
Separator,(AA), 1130x955x11,A190E1-H010.029
Carton,A190E2-H06,472 mmx182 mmx468
mm,VSC_VA912b
Power Code,UL,SVT#18/3C,75,LP-30B+LS13,L=1830+/-50mm,Black,Linetek,18AWG,No Bag
Power Cord,CCC,300/500V,0.75mm2,3C,PC323+COC-01,L=1830+/50mm,Black,Linetek,18AWG,No Bag
Power Code,CEE,SP-023+IS-14,H05VVF,3G,0.75mm2,CT-12,L=1800+/-50mm,ISHENG,18AWG,Black,No Bag
Power Code,JIS,VCTF,0.75mm2,3C,LP54+LS13J,L=1830+/-50mm,Black,Linetek,18AWG,No
Bag
Power Cord,BSI,H05VV-F,0.75mm2,3C,LP60L+LS-60,L=1830+/-50mm,Black,18AWG,PSB
Mark,Linetek,No Bag
Power Code,UL,SVT#18/3C,75,LP-30B+LS13,L=1830+/-50mm,Black,Linetek,18AWG,No Bag
Adaptor(AC/DC),65W/19V/3.42A,UP0651119008B,POTRANS(Black),Two BC
Monitor Cable,A150X2,30AWG,180cm,Black,JCE DSUB1
DVI CABLE,DVI-D(M) TO DVI-
D(M),S/L,1.8M,W/2F,JCE,BLACK
Yes1
POWER1
POWER1
ADAPTOR1
DVI1
1
1
1
1
1
1
1
1
1
1
1
1
ViewSonic Corporation Confidential
61
-
Do Not Copy VA912/b
Page 65
8. Exploded Diagram and Spare Parts List
C-00002365
40-D000246
BEZEL ASSY (Silver)
C-00002419
40-D000251
BEZEL ASSY (Gray)
2
HW-00000555
42A9930014
SCREW M3 * 6L
3
M-00000591
41A1969107
METAL FRAME FRONT
4
N/A
MJ0E301K01
TFT PANEL ASSY
5
HW-00000553
42A9930008
SCREW M3*4L
6
M-00000599
44A1913004
BACKLIGHT UNIT
7
P-00002378
73-D001222
MYLAR_INVERTER
8
B-00000573
2714000022
POWER PCB ASSY
B-00002364
35-D000320
AD PCB ASSY (Digital)
B-00002428
35-D000873
AD PCB ASSY (Analog)
10
CB-00000582
3241902003
FFC11CB-00000583
3241900003
OSD FFC
12
B-00000575
34A19K2301
OSD PCB ASSY
13
C-00002366
41A1999106
COVER AD
14
HW-00000553
42A9930008
SCREW M3 * 4L
15
HW-00000557
42A9930017
SCREW D3 * 8L
16
M-00000559
42A9940007
STAND OFF
C-00002421
40-D000237
REAR ASSY (Gray)
C-00002368
40-D000249
REAR ASSY (Black)
18
HW-00000556
42A9990005
SCREW D3 * 12L
C-00002422
40-D000248
STAND SEAT ASSY (Gray)
C-00002369
40-D000242
STAND SEAT ASSY (Black)
20
HW-00002442
42-D000314
SCREW M4*15L
C-00002420
40-D000245
COVER HINGE ASSY (Gray)
C-00002367
40-D000244
COVER HINGE ASSY (Black)
EXPLODED PARTS LIST (VA912/b-1 & VA912-2)
ViewSonic Model Number: VS10696
Rev: 1a
ItemViewSonic P/NRef. P/NDescription
1
17
19
21
9
ViewSonic Corporation Confidential
62
-
Do Not Copy VA912/b
Page 66
Monitor Assembly and Disassembly
1. Separate Stand Assy
Remove Stand Cover
Step 1 :
Remove Cover Hinge
Step 2 :
Loose and Remove 4 screws
Step 3:
Remove Stand Assy
Step 4:
Completed
ViewSonic Corporation Confidential
63
-
Do Not Copy VA912/b
Page 67
2. Separate Rear Cover (Rear Case Assy)
Loosen and remove screw.
Separate Bezel hooks to take Bezel and Rear Cover apart.
Step 1 :
Loose and remove screw.
Step 2 :
Separate Bezel hooks to take
Bezel and Rear Cover apart.