ViewSonic J7606 User Manual
PROJECTOR
WITH REMOTE CONTROL
Model J7606
Please keep this instruction sheet for future reference,
Please keep this instruction sheet for future reference,
Requires four “AA” (LR6) alkaline batteries (not included)
Requires four “AA” (LR6) alkaline batteries (not included)
as it contains important information.
as it contains important information.
and two (LR44) button cell batteries (included).
and two (LR44) button cell batteries (included).
Adult assembly is required for battery replacement.
Adult assembly is required for battery replacement.
Tool required for battery installation:
Tool required for battery installation:
Phillips screwdriver (not included).
Phillips screwdriver (not included).
CONSUMER INFORMATION
Visit us on-line at www.fisher-price.com
Call Fisher-Price
7 PM EST Monday through Friday and 11 AM - 7 PM EST
9 AM Saturday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Write to us at: Fisher-Price
Relations, 636 Girard Avenue, East Aurora, New York 14052.
®
Consumer Relations, toll-free at 1-800-432-5437,
®
Consumer
2
BATTERY INSTALLATION - PROJECTOR
Battery Compartment
Door
1.5 V x 4
"AA" (LR6)
Shown Actual Size
• Locate the battery compartment on the bottom of the projector.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert four “AA” (LR6)
battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with
a Phillips screwdriver. Do not over-tighten.
• When sounds or the lights from the projector become faint or stop,
it’s time for an adult to change the batteries in the projector!
Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
alkaline batteries, as indicated inside the
3
BATTERY REPLACEMENT -
REMOTE CONTROL
Battery Compartment Door
1.5 V x 2
LR44 or Equivalent
Shown Actual Size
• Locate the battery compartment on the back of the remote control.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert two, new, button cell (LR44)
inside the battery compartment.
• Replace the battery compartment door and tighten the screw with
a Phillips screwdriver. Do not over-tighten.
• When the remote control does not advance images, it’s time for an
adult to change the batteries in the remote control!
alkaline batteries, as indicated
4
Loading...