Vidonn F1 Manual
Home
VIDONN F1
Wireless bone conduction sport headphone
User guide
Settings
1.Charge
Charge the headphones with the included MicroUSB charging cable. The LED indicator will turn blue from red when charging is complete.
2.Pair
While off, press and hold the power button for 5 seconds to enter pairing mode, the LED indicator will flash blue and red repeatedly while in discovery.
3.Connect
In pairing mode, enable the Bluetooth settings in your device and select “Vidonn F1”, VidonnF1 will be connected with in seconds and there is a voice prompt by the word “connected”.
Multifunction Button
Function |
Action |
Prompt voice |
Play/pause music |
Click once |
None |
|
|
|
Skip to next song |
Double-click while music is |
None |
|
playing |
|
|
|
|
Answer/end call |
Click once |
One beep |
|
|
|
Reject a call |
Press and hold for 3 seconds |
One beep |
|
|
|
Low power alert |
|
Battery low |
Less than 30% |
|
|
|
|
|
Restore to factory settings |
Press and hold both volume |
Two beeps |
|
down button and |
|
|
multifunction button |
|
|
|
|
Volume Up/Power Button(B) Volume Down Button(C) |
|
|
|
|
|
Function |
Action |
Prompt voice |
Power on/ff |
Press and hold power button |
Power on/Power off |
|
for 3 seconds |
|
|
|
|
Turn up the volume |
Click the volume up button to |
There is one beep if reach |
|
adjust volume |
maximum |
|
|
|