Videotron SIMPLIFIED User Manual

SIMPLIFIED

Remote Control

USER GUIDE

GUIDE D’UTILISATION

de la télécommande

SIMPLIFIÉE

Program your remote to get started,
it’s really easy.

Troubleshooting

Your remote is already programmed
to control your Terminal. Follow the

steps below to program your remote to
your TV.

HERE’S HOW:

1. Install the batteries.

2. Find the manufacturer’s code for your
TV (see other side).

3. Turn on your TV.

4. Press and hold the SET button until the
red light ashes twice, then release.

5. Enter the rst manufacturer’s code
you found in step 2 (the red light will
ash twice).

6. Press the POWER button. If the TV
turns o, make sure that the VOL+/-
and MUTE buttons also work. If so,
you’re all set!

7. If not, repeat these steps using the
next manufacturer’s code (you may
need to try several codes before nding
the one that works).

CAN’T FIND YOUR CODE?

If you can’t program your remote using
the codes on the back, follow the steps
below.

1. Turn on your TV.

2. Press and hold the SET button un

­til the red light ashes twice, then
release.

3. Enter 9-9-1 (the red light will
ash twice).

4. Press CH+ multiple times until the TV
turns o.

5. Once the TV turns o, press SET.

SAVE YOUR TV CODE

For future reference, write the valid

manufacturer’s code for your TV here:

Q. Why does the red light display one

long ash during programming?

A. You may have entered the wrong code.

Make sure the code matches the
manufacturer of your TV and try
programming it again.

Q. Why does my red light ash, but when

I press a key, nothing happens?

A. Make sure the remote control is aimed at

your home entertainment device and is
no further than 4.5 metres (15 feet) away.
Also, make sure your Terminal isn’t being
blocked by anything.

Q. Why isn’t there any volume or sound?

A. Try pressing the MUTE button to restore

sound.

Q. Can I program this remote to control

my DVD player or other device?

A. This remote is designed to control your

Terminal as well as the volume on your
TV. The remote cannot be programmed
to other devices.

For FAQs

and additional support, visit

www.videotron.com/

simpliedremote