Videotron E2050-ER1, RT-U43CO, RC-U49C+, AT8400 User Manual
USER'S GUIDE
Remote controls
programming
IN THIS GUIDE
E2050-ER1 AND RT-U43CO REMOTE CONTROLS
MODELS E2050-ER1 AND RT-U43CO BUTTONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PROGRAMMING THE E2050-ER1 REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PROGRAMMING THE RT-U43CO REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
RC-U49C+ REMOTE CONTROL
MODEL RC-U49C+ BUTTONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PROGRAMMING THE RC-U49C+ REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AT8400 REMOTE CONTROL
MODEL AT8400 BUTTONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PROGRAMMING THE AT8400 REMOTE CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LIST OF CODES
TV SETUP CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
VCR SETUP CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
VCR SETUP CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1
E2050-ER1 AND RT-U43CO REMOTE CONTROLS
There are three remote controls for the digital terminals: the E2050-ER1, the RT-U43CO and the RC-U49C+.
You can identify your model by examining the "5" key.
• This key is oval on the E2050-ER1 and square on the RT-U43CO and RC-U49C+.
• The RC-U49C+ is the one with the three buttons "MODE", "ALL" and "AUDIO" at the top.
LED indicator (RT-U43CO)
On/off for each device
Displays the Interactive
Program Guide (IPG)
Displays settings
Selects an interactive
screen item
Adjusts volume
Returns to last
channel viewed
Controls the BYPASS option
Controls your VCR’s
TV/VCR function
LED indicator (E2050-ER1)
Displays channel information
Chooses interactive
screen item
Page Up/Page Down
Exits an application
Selects channels, up or down
Selects favourites channels
VCR and Video-on-Demand
(VOD) control keys
Switches between VCR and
Video-on-Demand (VOD)
The remote requires two alkaline AA batteries. A diagram inside the compartment of the remote indicates
proper battery placement. Replace as needed, when the indicator light becomes dim or no longer illuminates.
MODELS E2050-ER1 AND RT-U43CO BUTTONS
2
E2050-ER1 AND RT-U43CO REMOTE CONTROLS (CONTINUED)
PROGRAMMING THE E2050-ER1 REMOTE CONTROL
This step is not essential, but allows you to use the digital terminal remote control with your TV and VCR.
How to Program the TV Mode Key
1. Turn on the TV set.
2. Point the remote control away from the digital terminal, the TV and the VCR.
3. On your remote control, press and hold TV and SELECT at the same time until the LED on the remote blinks twice.
4. Using the remote control keypad, enter your TV’s 3-digit setup code (the codes are listed in the appendix on page
68); the LED should blink once each time you enter a digit. When the three digits have been entered correctly, the LED
blinks twice. If it doesn’t blink twice, try another code.
5. Once you have found the correct code, point the remote control at the TV set and press POWER.
6. If the TV turns off, write the code you used here: TV ________________
7. If your TV or VCR brand is not listed in the appendix or if none of the codes works, refer to "How to Search for
Codes", below.
How to Program the VCR Mode Key
1. Turn on the VCR and move the VCR/VOD slide switch to the VCR position.
2. Repeat the steps described under "How to Program the TV Mode Key", substituting the VCR key for the TV key.
3. Write the code you used here: VCR ________________
How to Search for Codes
1. Point the remote control away from your TV or VCR, depending on which one you are programming.
2. To search for TV codes, press and hold TV and SELECT at the same time until the LED on the remote blinks twice.
or
To search for VCR codes, press and hold VCR and SELECT at the same time until the LED on the remote blinks twice.
3. Slowly enter the code 9 9 1; the LED should blink once each time you enter a digit. When the three digits have been
entered correctly, the LED blinks twice.
4. Point the remote control at the TV or VCR, and press TV or VCR.
If the device turns off, go to step 5.
If the device remains on, start again from the beginning of step 4.
5. Press SELECT to confirm a valid code; the LED blinks twice.
6. Point the remote toward the device you programmed, and power on and off to confirm operation.
7. You now need to identify the code you just found.
Located in the bottom right corner of the remote, the VCR/VOD key is used to activate the dedicated
Video-on-Demand and VCR keys.
• Slide it to the VOD position when using Video-on-Demand, and to the VCR position when using the VCR.
E2050-ER1 AND RT-U43CO REMOTE CONTROLS (CONTINUED)
3
How to Identify Programmed Codes
1. Point the remote control away from the digital terminal , TV and VCR.
2. To identify the TV code, press and hold TV and SELECT at the same time until the LED on the remote blinks twice.
or
2. To identify the VCR code, press and hold VCR and SELECT at the same time until the LED on the remote blinks twice.
3. Slowly enter the code 9 9 0; the LED should blink once each time you enter a digit. When the three digits have been
entered correctly, the LED blinks twice.
4. Press 1 on the keypad, then count the LED blinks. The number of blinks indicates the first digit in the code. If the LED
doesn’t blink, the digit is 0.
5. Press 2 on the keypad, then count the LED blinks. The number of blinks indicates the second digit in the code.
6. Press 3 on the keypad, then count the LED blinks. The number of blinks indicates the third digit in the code.
How to Program the Volume Control
This step is not essential, but it lets you better control the volume on your devices.
You must have already completed TV setup as outlined in the How to Search for Codes section of this guide.
1. Point the digital terminal remote control away from the digital terminal, TV and VCR.
2. Press and hold the CBL and SELECT keys at the same time until the LED on the remote blinks twice.
3. Slowly enter the code 9 9 3; the LED should blink once each time you enter a digit. When the three digits have been
entered correctly, the LED blinks twice.
4. Press TV to control your television volume from the digital terminal remote control, or CBL to control your digital
terminal volume from the digital terminal remote control. The LED blinks twice to confirm a valid selection.
5. Point the remote toward the digital terminal and adjust the volume to confirm operation.
PROGRAMMING THE RT-U43CO REMOTE CONTROL
How to Program the TV Mode Key
1. Turn on the TV set, then press and hold the TV and SELECT keys at the same time until the LED stays lit.
2. Press and hold the CH+ key (Point and Press™ method) until the TV set turns off. As soon as it turns off, release the
CH+ key.
or
2. Refer to the list of TV codes on page 68 and enter the code for your TV brand. If there are several, try them one at a
time until the TV turns off.
3. Press the MUTE key. If the TV turns on, press the TV key to lock in the code. The LED will blink and go out. If the TV
does not turn on, repeat steps above until you can turn the TV on and off.
4. Write the code and your TV’s brand here: __________________
5. If you found the code using the Point and Press™ programming method refer to the section 3-Digit Code Number
Readback.
Before using the volume control feature for the first time, set the volume to three-quarters using the TV
remote control. Use the digital terminal remote for all subsequent volume changes.
If, when using the Point and Press™ method, you find a code that turns your TV off but not back on,
you may have gone past the correct matching code. Try pressing CH- one step at a time until you find a code
that turns your TV back on.
4
E2050-ER1 AND RT-U43CO REMOTE CONTROLS (CONTINUED)
How to Program the VCR Mode Key
1.
Turn on the VCR or DVD player, then press and hold the VCR and SELECT keys until the LED stays lit.
2.
Repeat the steps described under How to Program the TV Mode Key, substituting the VCR key for the TV key.
3.
Write the code and your TV brand here: _____________________________
Write the code and your DVD brand here: _____________________________
4.
If you found the code using the Point and Press™ programming method, refer to the section 3-Digit Code Number
Readback, below.
How to Program a TV/VCR Combination Unit
1. Follow the steps described under How to Program the TV Mode Key and How to Program the VCR Mode Key.
2. In the space provided, write the code for the TV _________________ and VCR __________________
3. If you found the code using the Point and Press™ programming method, refer to the section 3-Digit Code
Number Readback, below.
3-Digit Code Number Readback
1. For the TV code, press and hold the TV and SELECT keys at the same time until the LED stays lit.
2. Press the INFO key. The LED will "blink back" the code numbers, with a 1-second interval between each digit of the
code. Example: For code "035", the indicator light will blink 10 times, then 3 times, then 5 times. Once you have
found the code, write it down here for future reference _______________
3. For the VCR code, follow steps 1 and 2 using the VCR and SELECT keys. Once you have found the code, write it down
here for future reference _______________________
4. For the terminal code, follow steps 1 and 2 using the VCR and SELECT keys. Once you have found the code, write it
down here for future reference _______________________
You cannot use the Point and Press™ method to program the VCR functions of the TV/VCR.
Located in the bottom right corner of the remote, the VCR/VOD key is used to activate the dedicated
Video-on-Demand and VCR keys. The colour of the remote control’s LED tells you which function has
been activated.
• Press the VCR/VOD key. If the LED is red, the remote is in Video-on-Demand mode;
if the LED is green, it is in VCR mode.
Loading...