Victory Refrigeration RS-1D-S7 Installation Manual

Installation, O p e r a t i o n and

Troubleshooting

Instructions

Reach-In R e f r i g e r a t o r and F r e e z e r Cabinets

For Models:

VR-1, VR-2, VR-3
VF-1, VF-2, VF-3

RS-1D-S7, RS-2D-S7, RS-3D-S7
FS-1D-S7, FS-2D-S7, FS-3D-S7

Manual Part No. 50707403

Print Date: 09/14/10

11 0 W o o d c r e s t R o a d , C h e r r y H i l l , N J 0 8 0 0 3

Phone: [phone] Fax: [phone] Website: www.victory-refrig.com

E-Mail: [e-mail] [e-mail] [e-mail]

Rev. 1A

T H A N K Y O U

Thank you for purchasing a Victory Refrigeration Reach-In Refrigerator or
Freezer Cabinet! This unit has passed our strict Quality Control Inspection and
meets the high standards set by Victory Refrigeration. You have made a quality
investment that with proper maintenance will give you years of service.

Please read the following installation and maintenance instructions before
installing or using your unit. If you have any questions, please call our Customer
Service Department at [phone].

IMPORTANT INFORMATION - PLEASE READ

* Please read these instructions carefully before installing or using. If recommended
procedures are not followed, warranty claims will be denied.

* Your Warranty Registration information is located on the next page of this manual.
Please complete the card and submit it to Victory Refrigeration within 10 days of
installation. Failure to properly register equipment can void the warranty.

* Victory Refrigeration reserves the right to change specifications and product
design without notice. Such revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for previously purchased
equipment.

* A detailed Owners Manual with a troubleshooting guide, parts lists and additional
information can be ordered from the factory or may be downloaded free from the
website at www.victory-refrig.com.

LIMITED WARRANTY

(Continental USA Only)

The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material
and workmanship for which it is responsible. The Seller’s obligation under this warranty shall be limited to replacing
or repairing at Seller’s option, without charge, F.O.B. Seller’s factory, any part found to be defective and any labor
and material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of
twelve (12) months from the date of installation, provided, however, installation occurs within six months of date of
purchase and equipment is in normal use and service and is installed in accordance with manufacturer’s
recommendations and provided terms of payment have been fully met. All labor shall be performed during regular
working hours. Overtime premium charges will be at Buyer’s expense.

Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly
installed, started-up and inspected by the dealer or authorized Victory Service agent.

Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty
obligations or any other obligations, expressed or implied.

This warranty does not cover Thermostat or Defrost Timer calibration and/or adjustment, freight damage, normal
maintenance items outlined in Owner’s Manual, adjustment of door mechanisms or replacement of light bulbs, fuses
or batteries. The warranty does not cover installation, start-up, normal maintenance, food loss, or other consequential
damage.

Any repairs or replacement of defective parts shall be performed by Seller’s authorized service personnel. Seller
shall not be responsible for any costs incurred if the work is performed by other than Seller’s authorized service
personnel. Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial
numbers and installation location must be shown on the claim. A receipted bill from the servicing agency must
accompany the claim, together with full details of the service problems, diagnosis and work performed. Victory
reserves sole discretion whether further documentation on a claim is to be submitted.

Seller shall not be liable for consequential damages of any kind which occur during the course of installation of
equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied
hereunder, and Buyer’s sole and exclusive remedy against Seller for any breach of the foregoing warranty or
otherwise shall be for the repair or replacement of the equipment or parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the
equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not
guarantee the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied
hereunder and Seller shall not be liable for any prospective or lost product or profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED
WARRANTIES WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY
OR OF FITNESS FOR A PARTICULAR PURPOSE.

The foregoing shall be Seller’s sole and exclusive obligation and Buyer’s sole and exclusive remedy for any action,
whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase
price of the item.

You may register online at www.victory-refrig.com, fax this completed page to [phone], or copy and mail form below to Victory.

NOTE: The following mail-in form or online registration must be lled out and forwarded to Victory by the installer or customer

within 10 days after start-up. Failure to do this will invalidate the warranties. Retain this information for your records.

110 WOODCREST ROAD
CHERRY HILL, NJ 08003-3648
TEL: [phone] : FAX: [phone]

WARRANTIES NOT VALID UNLESS REGISTERED AT

Cabinet Model No.

Cabinet Serial No.

(Data plate information located inside cooler on the upper left wall)

FACTORY WITHIN 10 DAYS AFTER START-UP DATE.

ORIGINAL DATE OF INSTALLATION

CUSTOMER/END USER NAME

STREET

DEALER'S NAME

STREET

PHONE

CITY STATE

ZIP CODE

PHONE

CITY STATE ZIP CODE

INSTALLATION INSTRUCTIONS

Proper installation is the first step to operation. We recommend that your refrigerator or freezer
be installed by an authorized Victory Certified Installer.

Receiving Shipment

All units are performance tested and thoroughly inspected prior to shipment. Upon leaving the
factory, all units are in perfect condition. Upon receipt, examine the exterior of the shipment
packaging for any signs of rough handling. If the cabinet is damaged, it should be noted on the
delivery slip or bill of lading and signed. A claim must be filed immediately against the carrier
indicating the extent and estimated cost of damage incurred.

Uncrating

Tools Needed : 3/4” Box Wrench, Adjustable Wrench, Level

WARNING: Never lay your refrigerator or freezer down on either its back, front or sides. This
allows compressor oil into the refrigerant lines which can damage the compressor at start-up. If
the unit is laid down, it must be set upright for a minimum of 12 hours before starting the
compressor. Failure to adhere to the above recommendation will void the warranty.

1. Split plastic wrap along one of the cardboard posts. Remove and discard all packaging
material, tape and interior components.

2. Move cabinet as close to final location as possible before removing skid.

3. Remove the shipping skid by tipping the cabinet forward. Remove the shipping bolts with
3/4” box wrench while the cabinet is held in one direction. Repeat this procedure
while the cabinet is held in the opposite direction.

4. Use extreme caution when removing the wooden skid, especially when the last bolt is
removed. If not properly blocked, the skid will fall to the floor.

Locating Your New Storage Refrigerator or Freezer

Consider the following when selecting a location for your refrigerator or freezer:

1. Clearance - There must be a minimum clearance of 10” between the top of the refrigerator
or freezer and the ceiling.

2. Floor Load - The floor on which the cabinet will rest must be free of vibration and suitably
strong enough to support the combined weights of the cabinet plus the maximum product
load.

3. Ventilation - The air cooled, self-contained refrigerator or freezer requires a sufficient
amount of cool, clean air. Avoid placing the refrigerator or freezer near heat generating

iii

equipment such as ovens, ranges, heaters, fryers, steam kettles, etc., and out of direct sunlight.
Avoid locating the self-contained refrigerator or freezer in an unheated room, or where the room
temperature may be below 55°F.

Installing Casters or Legs

Refrigerators and freezers are shipped with 1/2” single stud mounted legs or casters.

1. Casters / legs must be screwed by hand into the threaded holes located on the case
bottom (*Note: Once the caster cannot be turned, using a 3/4” box wrench, tighten the

nut in between the mounting plate and wheel of the caster until it is snug).

2. Tilt the cabinet in one direction approximately eight inches and block it securely with
several pieces of 2 x 4 lumber or other suitable material.

3. Screw in the two left or right casters/legs.

4. Repeat this procedure to install the other casters/legs.

Leveling

Cabinets must be leveled when installed. Failure to level your cabinet may result in doors not
sealing, closing properly or condensate water not draining properly.

Casters - Cabinets with casters can be leveled by placing large flat washers in
between 1/2” stud and holes located on the case bottom.

Legs - Rotate the foot of the leg with an adjustable wrench to achieve desired height
for leveling.

Cabinet Cleaning

Prior to placing your new refrigerator/freezer and all shelves, pans and slides into operation, it is
advisable that the interior be washed thoroughly with a mild detergent and water solution. Rinse
with clear water and a sanitizing solution. Allow cabinet to air dry.

Installing Shelves

All cabinets with shelves are supplied with pilasters and shelf clip supports. Shelves are easily
installed by inserting the shelf support clips into the pilasters so they fit tightly. Align the shelf so
the smaller fill wires run from front to rear and rest the shelf on the clips.

iv