Victory Refrigeration RISA-1D-S7, RIS-2D-S7, RIS-1D-S7, RISA-3D-S7, RIA-3D-S7 User Manual

...

Roll-in Refrigerators

Cabinet:

Each Victory cabinet is internally supported, braced and assembled into a single rigid unit. The cabinet front and doors are constructed of heavy gauge polished stainless steel to maintain an attractive appearance after years of heavy use. Foamed-in-place polyurethane insulation throughout the cabinet and doors ensures the ultimate in energy efficiency.

Doors:

The self-closing doors are securely mounted on rugged cam-lift hinges, which have a lifetime guarantee. Each door has a heavyduty cylinder lock and self-adjusting magnetic gasket to prevent the cold air from escaping. Humidity control wires located around the door jamb prevent condensation from forming on the cabinet front and are concealed by a high impact, non-conductive thermal breaker strip. The interior door liner is constructed of durable ABS material, which resists denting and scratching and is

easy to clean. Each safety grip handle is guaranteed for life. Removable ramps are provided on the bottom of each door opening.

Refrigeration System:

All components of the self-contained refrigeration system are mounted on top of the cabinet. The air circulating fans and the forced convection-cooling coil are contained in an insulated housing separate from the product zone allowing for maximum food storage capacity. All condensate water is disposed of automatically by the energy efficient non-electric condensate evaporator, no plumbing is required.

RIS and RISA Models

• Digital Thermometer/Battery Back-up

RIA Models

• Dial Thermometer

Standard Features (all models)

• Energy Saver Switch

• Stainless Steel Case Front and Door(s)

• Lifetime Heavy-Duty Lifetime Cam Lift Hinges

• Lifetime Safety Grip Handle(s)

• Self-Closing Doors with Safety Stops

• Adjustable Wiper Gasket(s)

• Removable Ramps(s)

• Energy Saving Thermal Breaker Strips

• Door Opening Accepts Carts up to 27”w x 29”d x 64”h

• Heavy-Duty Cylinder Locks

• One Piece Self-Adjusting Magnetic Door Gaskets

• High Impact ABS Interior Door Liner

• Plasticized Fin Coil

• Environmentally Friendly R-134a Refrigerant

• Non-Electric Condensate Evaporator

• Stainless Steel Floor

• Cord and Plug Attached on 115V Models 12 Amps or Less

Optional Features and Accessories

• Dial or Digital Thermometer

• Hinged Glass Doors with Cylinder Locks

• Change Door Swing

• Shelf Pilaster Strips

• Adjustable Stainless Steel Wire Shelves

• Stainless Steel Angle Pan Slides

• Zinc Plated Wire Pan Slides

• Stainless Steel Case Back

• Remote and Roll-Thru Models

Note: All 2 & 3 section “Roll Thru” models only have stainless steel interiors

RIS MODELS —

Stainless steel exterior and interior.

RIS-1D-S7 RIS-2D-S7 RIS-3D-S7

RISA-1D-S7 RISA-2D-S7 RISA-3D-S7

RIA-1D-S7 RIA-2D-S7 RIA-3D-S7

RISA MODELS —

Stainless steel exterior. Aluminum interior.

RIA MODELS —

Stainless steel fronts and doors. Aluminum sides and interior.

RIS-22D-SS7

Half Door, Roll-TThru and Remote Models Available

Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com

Victory Refrigeration specification sheets

are available online at www.victory-refrig.com.

Approvals:

Project:

Location:

Item #:

Quantity:

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.

Continuous product development may necessitate specification changes and design without notice.

Victory Refrigeration, Inc. Roll-iin Refrigerators

CHARACTERISTICS ONE SECTION TWO SECTION THREE SECTION

Roll-In Roll-Thru Roll-In Roll-Thru Roll-In Roll-Thru

Width, Overall 36

101

Depth, Overall (incl. handles) 35

Height, Overall 84 84 84 84 84 84 Depth, Door(s) Open 90º 65

Depth Case Over Ramp 35

Clear Door Width 27

Clear Full Door Height 65

Capacity Net (cubic feet) 33.6 36.2 67.2 72.4 100.9 75.9 No. of Full Doors 1 2 2 4 3 6 Cabinet Voltage 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 Feed Wires 2 2 2 2 3 2 Condensing Unit Voltage

115/60/1 115/60/1 115/60/1 115/60/1 208-230/60/1 208-230/60/1

Condensing Unit Size (HP)

Total Amperes 9.2 12.0 11.9 12.6 10.6 12.1

Crated dim. & wts.

Ht. Width Depth Cu.Ft. Lbs

One Section 87 413/4443/494.1 450 Two Section 87 74

/8443/4168.1 750

Three Section 87 107 44

/4241.1 114 0

Approximate Roll-Thru weights, add 15%

FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For example: Model RIS-1D-S7(self-contained) would be RIS-1D-

R7 remote cabinet. Air circulating fans, expansion valve and plasticized coil are provided. Condensing units not supplied. The following units are recommended with

” O.D. Suction line,

” O.D. Liquid line.

Dimensional tolerance ± 1/4” Metric dimensions (MM)

REMOTE REFRIGERATION

Cond. Unit BTUH Cabinet Amps One Section1/3H.P. 2540 115/60/1 2.2 Two Section

/2H.P. 4400 115/60/1 3.0

Three Section

/4H.P. 5800 115/60/1 4.3

For Remote Roll-Thru–Consult factory

Printed in U.S.A. 010423

PART OF AGA FOODSERVICE GROUP

NOTE: If cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2” is required.

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

ROLL-THRU MODELS

39.38

(1000)

ELEC. CONN.

39.38

(1000)

ELEC. CONN.

39.38 (1000)

ELEC. CONN.

ROLL-IN MODELS

35.88 (911)

65.25

(1657)

.88

(22)

31.25 (793)

36.50 (927)

27.75 (705)

ELEC. CONN.

84.00

(2133)

35.88 (911)

65.25

(1657)

.88 (22)

27.75 (705)

63.62

(1616)

68.88

(1749)

ELEC. CONN.

27.75 (705)

84.00

(2133)

65.25

(1657)

.88

(22)

27.75 (705)

96.00

(2438)

ELEC. CONN.

101.25 (2571)

27.75 (705)

35.88 (911)

84.00

(2133)

14.12 (358)

34.88 (873)

32.38 (822)

35.50 (902)

TO RAMP