Vicks V150 User Manual

Getting Started with the
Vicks Warm Steam Vaporizer Model: V150

To get the most out of your Vicks Warm Steam Vaporizer, follow these helpful steps:

1. To add water to your vaporizer,

open and remove the steam
unit by gripping the blue top and
twisting counter-clockwise
to unlock.

4. Place your Vicks Vaporizer on a

firm, level surface at least twelve
inches from the wall. Be sure it is
out of the reach of children
and pets.

2. Fill the container with cool tap

water to the max fill line.

5. For added relief and soothing

vapors, insert up to 2 VapoPads
into the slots or add Vicks
VapoSteam into the medicine cup.

3. Insert the blue steam unit back

into the water container then twist
clockwise and lock into place by
aligning the arrow on the steam
unit with the lock symbol.

6. If your vaporizer fails to steam

after 10-15 minutes, you may have
low mineral content in your water.

For locations where tap water has
low to moderate mineral content,
add 1 to 2 pinches (1/8 teaspoon) of
ordinary table salt to the water and
mix thoroughly.

After 10 minutes, if your vaporizer
still does not product steam, add
another pinch or 2 of salt.

Questions?

Please reach out our Consumer Relations team by calling 800-827-6712 or emailing
[e-mail]. We are here to help!