Technical Data Sheet
Vibra-Tite® 906
Product Description
Vibra-Tite 906 i s a unique a nti-seize co mpound
composed of a blend of non-metallic antifriction
materials specially formulated for marine or offshore
environments. T his mixture of M oS
base g rease b ond t o metal surfaces, f ill voids a nd
imperfections o n t he s urface s hielding s liding
components from interference making assembly and
disassembly easy without damage to the nut or bolt.
and c omplex
2
Typical Applications
906 A nti-Seize i s r ecommended f or t he f ollowing
applications:
• Boiler covers
• Release paste for raised face gaskets
• Heat exchanger bolts
• Door track lubricant for sliding doors
• Centrifugal pump shaft lubricant
• Bolt lubricant for engine assembly
• Anything needing lubrication for threaded fasteners
Instructions for Use
Using the brush top applicator, apply 906 liberally to
the fastener parts to be joined.
Product Characteristics
Color ............................................................... Grey
Penetration (ASTM D-217) ....................... 285-315
Density (lb/gal) .................................................. 8.9
Specific Gravity ............................................... 1.07
Flash Point (ASTM D-92) ..............>430°F(221°C)
4-Ball (ASTM D-2596)
Weld Point, kg .......................................... 315
Load Wear Index ................................... 54.24
Wear Scar (ASTM D-2266)........................... 1.025
Dropping Point ................................. 450°F(232°C)
(ASTM D-566)
Thickener Type ............................. Complex Blend
Base Oil Type ......................................... Petroleum
Copper Strip Corrosion ....................................... 1B
(ASTM D-4048)
Water Spray-Off Resistance .......................... <40%
(ASTM D-4049)
VOC (EPA624) .............................................. None
Marine Grade Anti-Seize
May 2017
General Information
Shelf Life
Five years from date of manufacture.
Note
The data ar e furnished for i nformation o nly a nd ar e
believed t o b e reliable. W e can not assume
responsibility for the r esults obtained by others over
whose methods we have n o c ontrol. I t is
recommended t hat t he p roduct b e t ested i n t he
application for which it is to be used.
Loading...