Page 1
Excel
Primer N
611
Product Description
Vibra-TITE Excel Primer N 611 is a
flammable but ozone friendly version of
Primer N which replaces the original
trichloroethane based product. Primer N
speeds cure of all anaerobic fluids and
assists in speeding fixture times and
reducing ultimate cure times.
Typical Applications
Vibra-TITE Excel Primer N is used with all
Vibra-TITE anaerobic products but is not
recommended for our Gasket Makers.
Primer N has an on part life of 30 days.
Procedure for Application
Product is normally hand applied from the
bottle by brushing, wiping or spraying onto
parts.
Properties
Excel 611 Primer N is a blend of flammable
solvents. Care must be taken to avoid
flames.
Technical Features
Chemical Base..................Heptane / Acetone
Color:.................................................. Green
Viscosity ...............................................3cps
Shelf Life.........12 months @ 68°F unopened
Flammability.................................. Yes, high
Cured Performance
Performance is dependent on the anaerobic
viscosity, gap fill and type of materials
being bonded. However, in typical
applications fixture times are achieved in
approximately 2 minutes.
Presentation
Bottles...........2 oz, 8 oz (with pump sprayer)
Cans.....................................................Gallon
General Information
Storage
Store in cool area out of direct sunlight
Note
Vibra-TITE Excel Primer N can be used by
applying the primer to one or both bonding
surfaces by spray, wipe or brush. Excel
Primer N can be used for batch dipping of
large quantities of parts while it also
degreases and cleans your parts.
Health & Safety in use
Use in well ventilated area and read MSDS.
Product Data Sheet
Loading...