Vibra-Tite 612 Technical Data
Excel
111 Cure Speed w/ Primer
0
20
40
60
80
100
120
5 10 30 2 4 8 24
Speed of Cure (min -- hours)
% of Cure
Steel
Phosphate/Oil
Zinc
Primer T
612
Product De scription
Vibra-TITE 612 Excel Primer T is a
flammable but ozone friendly version of
Primer T which replaces the original
trichloroethane based product. Primer T
speeds cure of all anaerobic fluids and
assists in speeding fixture times and
reducing ultimate cure times.
Typical Applications
Vibra-TITE 612 Excel Primer T is a fast
acting primer. Primer T is best suited for use
with our threadlockers, retaining compounds
and pipe sealants. Ex cel Primer T has an on
part life of 7 days.
Procedure for Application
Product is normally hand applied from the
bottle by brushing, wiping or spraying onto
parts.
Properties
Excel 611 Primer N is a blend of flammable
solvents. Care must be taken to avoid
flames.
Technical Features
Chemical Base..................Heptane / Acetone
Color:..................................................Yellow
Viscosity ................................................3cps
Shelf Life........ 12 months @ 68°F unopened
Flammability...................................Yes, high
Cured Performance
Performance is dependent on the anaerobic
viscosity, gap fill and type of materials
being bonded. However, in typical
applications fixture times are achieved in
approximately 2 minutes.
Product Data Sheet
Presentation
Bottles...........2 oz, 8 oz (with pump sprayer)
Cans.....................................................Gallon
General Infor m ati o n
Storage
Store in cool area out of direct sunlight
Note
Vibra-TITE Excel Prim er T can be used by
applying the primer to one or both bonding
surfaces by spray, wipe, or brush. Excel
Primer T can be used for batch dipping of
large quantities of parts while it also
degreases and cleans your parts.
Health & Safety in use
Use in well ventilated area and read MSDS.
Some Common Cure Speed Charts
Technical data contained within this document is intended for reference only
For assistance and recommendations on specifications for this product, contact ND Industries
info@ndindustries.com
5/10/2011 Page 1 of 2
Loading...