Vibra-Tite 600 Technical Data

Excel
Structural Activator
600
Product Description
Typical Applications
When used in conjunction with Structural Adhesives this product will bond rubber, glass metal and wood to themselves and in various combinations.
Instructions for Use
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the bottle by brushing, wiping or spraying onto parts.
Properties
Excel 600Activator is a blend of non­flammable resins. On part life is about 8 hours or one working day. Activator 600 will cure adhesive material in approximately one minute.
Technical Features
Chemical Base............... Methacrylate/Resin
Color:..................................................Brown
Viscosity .................................. 100-200 cps
Shelf Life...........6 months @ 68°F unopened
Flammability............................................ No
Cure speed....................................... 1 minute
Cured Performance
Performance is dependent on the materials being bonded, gap fill and surface area. When used in conjunction with a structural adhesive shear strengths are typically within 2600-3000 psi.
Presentation
Tubes....................................50ml & 250ml
General Information
Storage Store in cool area out of direct sunlight
Note
Apply Excel 600 Activator to one surface and the adhesive to the opposite surface and assemble parts together. Fixture is achieved within a few minutes and full cure within 24 hours.
Health & Safety in use
Observe good housekeeping practices. Read MSDS and use in well ventilated area.
Product Data Sheet
Loading...