Vestil STAND-H User Manual

rev. 7/12/2016 Product manual, operation instructions.doc

V

.

ESTIL MANUFACTURING CORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: [phone] -or- Toll Free [phone]

www.vestilmfg.com e-mail: [e-mail]

Fax: [phone]

STAND-H & STAND-H-HP

NSTRUCTION MANUAL

I

Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely
to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a compl ete description of the damage on the bill of lading. If t he
product is undamaged, discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or pro perty dam age that oc curs as a consequenc e of f ailing to appl y either: a)
the instructions in this manual; or b) information provided on labels affixed to the product.

Neither is Vestil
responsible for any consequential damag es sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.

Table of Contents

Hazard identification: expl a nati on of signa l words… … …… …… ……………………………………………… … …. 2
Safety Guidelines…………………………………………………………………………..………………………….….2
Exploded parts diagrams and bills of materials………..……………………………………………………………...3
Label placement diagram …………..
Limited warranty………………………………………………………………………………………………………….5

…………………………………………………………...................................4

Copyright 2013 Vestil Manufacturing Corp. Page 1 of 5

rev. 7/12/2016 Product manual, operation instructions.doc

HAZARD IDENTIFICATION: explanation of signal words

This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable
seriousness of those injur ies, if the product is misused in the ways described. Other signal words call attention to
uses of the product likely cause property damage.

The signal words used appear below along with the meaning of each word:

Identifies a hazardous situation which, if not avoided, WILL result in DEATH or

SERIOUS INJURY. Use of this signal word is limited to the most extreme

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or

Identifies practices likely to result in product/property damage, such as operation that

Each person who ass embles, installs, uses, or maintains this product should read the entire manual and fully

understand the directions in advance. If after reading the manual you do not understand an instruction, ask
your supervisor or employer for clarification, because failure to adhere to the directions in this manual
might result in serious personal injury.

SAFETY GUIDELINES

Vestil diligently str ives to identify foreseeable hazards associated with the use of its products . However, material
handling is inherently dangerous and no manual can address every conceivable risk. The end-user ultimately is
responsible for exercising sound judgment at all times.

situations.

SERIOUS INJURY.

MODERATE injury.

might damage the product.

Electrocution m ight result if any part of the product contacts electrifie d wires. Reduce the likelihood of

electrocution by applying common sense:

 DO NOT contact electrified wir es with any part of this device, your body, or clothing.
 DO NOT use or store the product where contact with electrified w ir es is likely.
 Always inspect the usage area before using the product & implement precautions that account for conditions.

If this product is used improperly or c arelessly, the operat or and/or bystanders might sustain serious

personal injuries or even be killed. To reduce the likelihood of injury:

• Failure to read and understand the entire manual before assembling, installing, using or servicing the
product is a misuse of the product.

• Read the manual to refresh your understanding of proper use and maintenance procedures.

• DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and certain that it

will be safe to use afterwards.

• DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized
modifications automatically void the Limited Warranty and might make the product unsafe to use.

• DO NOT exceed the maximum rated load (see Label 287 on product).

• Inspect the product before each use.

A. DO NOT use this product if the inspection re veals structural damage. Examples of structural damage include,

but are not limited to, the following: 1) Cracked, broken or significantly deformed load-bearing members; 2)
cracked welds; 3) missing or deformed safety chain/strap; 3) corrosion, severe wear, or other condition that
affects the ability of the produc t to support weight or itself. Replace each part that fails to pass an inspection,
and DO NOT use the product until it is fully restored to normal condit ion.

B. DO NOT us e the produc t if any unusual noise or movement is observed. If a malfunction occurs, rem ove the uni t

from service and notify your supervisor & maintenance personnel about the issue.

• DO NOT use this device UNLESS all product labels (see “Label Placement Diagram”) are readable and undamaged.
Proper use, maintenance, and storage are essential for this product to function properly.

o Al ways use this prod uct in accordanc e with the instru ctions in this m anual and consisten t with any training relevant
to machines, devices, etc. used in conjunction with this product.

o Keep the product clean & dry. Lubricate moving parts.
o FO R HYDRAULIC UNITS: Do not use brake fluid or jack oils in the hydraulic s ystem. If oil is n eeded, use an ant i-

wear hydraulic oil with a vis cos it y grade of 150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid.
o Contact the manufacturer for MSDS information

Copyright 2013 Vestil Manufacturing Corp. Page 2 of 5