Vestil MWP-220, MWP-440 Instruction Manual

Instruction Manual

Instruction Manual

Instruction ManualInstruction Manual

MWP-220 & MWP-440

Note: The Owner/Operator must read carefully and understand all

the information presented here before operation.

Content

A. Dimensions & Parameter Chart
B. Part Name
C. Warnings
D. Operation Guide
E. Daily Maintenance & Periodic Inspection
F. Trouble Shooting
G. Explosive Graphics
H. Chart of Parts

Thank you for your using this series of elevators.

This manual describes right operation method for ensuring safety and tile
right ways of maintenance, which prolongs the working life of the equipment.
The operator must read carefully and understand all the information presented
here and be trained before operation, or it will cause personal injury or elevator
damaging.
This series of elevators are mainly applied for the use of transition,
elevation and piling for goods with a certain weight and different shape, or for
the occasion of taking off some goods from a certain height fork transition.

That the light and delicate appearance, quick and convenient operation
together with lots of accessories make the series of elevator be applied
extensively in various kinds of factories, emporiums and warehouses, and
become highly reliable under-worker with only little maintenance.

A. Dimensions & Parameter Chart

Type MWP-220 MWP-440
Load Capacity lbs. 220 440
Height Min. H1 in 5 1/8 5 1/8
Height Max. H2 in 59 59
Platform L1×W in 18.5×23 5/8 18.5×23 5/8
Dimension L×W×H in 33×23 5/8×72 33×23 5/8×75 9/16
Front Wheel Dia. d in Ø2.95 Ø2.95
Rea Wheel Dia. D in Ø4.92 Ø4.92
Weight lbs 105 155

B. Part Name

1. Rear Wheel

2. Handle

3. Ratchet transmission structure

4. Guard

5. Platform (several accessories available)

6. Wire rope

7. Pole

8. Front wheel

C. Warnings

1. Not allowed to be used on slanting floor, course and uneven ground and soft land.

2. Not allowed for overloading, and it is necessary to keep a uniformity of load.

3. Special attention to transit round and roll-able articles for safety both when loading and
unloading.

4. Keep the platform or fork (accessory) lowest positioned, stable and slow moving the elevation
cart when heavy loaded.

5. When the platform or fork (accessory) lowers to the end, not to turn the handle counter-wise
continuously, or the wire rope will be too loosened to keep in the pulley and that is dangerous and
trouble causing.

6. When the loaded platform or fork (accessory) elevated to a relatively prominent height,

please take care to ensure the vehicle stable and safe.

D. Operation Guide

1. Lock up the wheel before up/down operation or loading or unloading.

2. Validate the wire rope seated in the pulley, connecting bolts fast and fixed and safe.

3..Turn the handle clock-wise, platform or fork (accessory) goes upward up to the high-max, stop
turning the handle, the platform or fork (accessory) shall stop and keep up at any position without
descending.

4. Turn the handle counter clock-wise, platform or fork (accessory) lowers to the end, not to turn

the handle continuously, lest the wire rope shall escape.