Vestil MULTI-C User Manual

VESTIL MANUFACTURING CORPORATION
2999 North Wayne St., Angola, IN 46703 Phone (260) 665-7586 • Fax (260) 665-1339 E-mail: sales@vestil.com • www.vestil.com
Storage Solution
Contents
Warnings and Safety Instructions ................ 1
Replacement Parts and Receiving .............. 1
Revised 09-07
A company dedicated to solving ergonomic and material handling problems since 1955
.
INSTRUCTION GUIDE
Assembly Instructions ..................................... 1
WARNINGS & SAFETY INSTRUCTIONS
Ensure that all employees understand and follow the following instructions.
Failure to read and understand these instructions before assembling the unit constitutes a misuse of the product. All persons involved in performing this task must be familiar with this material.
Maintenance and repairs are to be done only by personnel qualified to perform the required work. Consideration will not be given for warranty repair charges without prior written authorization from the manufacturer.
REPLACEMENT PARTS
We take pride in using quality parts on the equipment we manufacture. We are not responsible for equipment problems resulting from the use of unapproved replacement parts.
To order replacement or spare parts for this equipment, contact the factory.
In any communication with the factory please be prepared to provide the model and serial number of the unit.
ASSEMBLY INSTRUCTIONS
1. Lie pallet base on flat surface.
2. Unfold all levels into rectangular shapes.
3. Line up the short side of the first level to the short side of the pallet. Align corner brackets of the level with the corners of pallet. Place the level on the pallet.
4. Repeat with desired number of levels (four levels maximum).
RECEIVING INSTRUCTIONS
It is possible that this unit could incur damage during
transit.
Inspect the parts and packaging closely when it
arrives.
either the packaging or to the unit when it is being received, immediately make a note of it on the packing slip!
upon its arrival to ensure that there is no concealed damage or to enable a timely claim with the carrier for freight damage.
ordered.
If you see evidence of damage or rough handling to
It is important that you remove the unit’s packaging
Also verify that the unit and its specifications are as
MULTI-C
MULTI-HEIGHT CONTAINER
Loading...