VESTEL 55ua8900, 48UA8900 Operating Instructions Manual

TELEViZYON

KULLANIM KILAVUZU

OPERATING INSTRUCTIONS

4K SMART 55UA8900 55” LED TV

iOS ANDROID

English - 52 -

Dear Customer,

First of all, congratulations for choosing our environment and technology
friend product. Taking it as a goal to oer you products beyond your
expectations, we present the television which is elaborately manufactured
in modern facilities and subjected to strict quality controls for your use.
This user manual will guide you through use of your device; you will realize
that your device includes cutting edge technological solutions and is very
easy to use.
Your device will serve you for long years as long as you display the
necessary care and maintenance. We hope you enjoy using your device.
Your device will serve you for long years as long as you display the
necessary care and maintenance. We hope you enjoy using your device.
This product was manufactured in environmentally friendly VESTEL
ELEKTRONİK A.Ş. facilities with no harm to the nature.

Important Safety-Related Information

Please read the instructions in this manual carefully to know your device
quickly and make use of all of its functions and keep for future reference.
This user manual includes important information regarding first use,
installation, safety, intended uses, cleaning and maintenance and
troubleshooting of your device.
Follow the instructions in the user manual.

WARNING: Risk of serious injury or death.

RISK OF ELECTRIC SHOCK: Dangerous voltage.

CAUTION: Risk of injury or damage to properties.

IMPORTANT: Running the system properly.

WARNING: Additional remarks are highlighted.

English - 53 -

Contents

Dear Customer, .....................................................................................................................52

Important Safety-Related Information ................................................................................ 52

Safety Information........................................................................................................ 57

Markings on the Product .............................................................................................. 58

Safety Information to Be Observed During Cleaning and Maintenance .......................59

Safety Information to Be Observed During Transport and Shipping ..............................60

Batteries ..................................................................................................................................60

WARNING .............................................................................................................................60

Liability Limitation .................................................................................................................60

Features ................................................................................................................................... 61

Accessories Included ............................................................................................................. 61

Standby Notifications ............................................................................................................ 61

TV Control Buttons & Operation ........................................................................................ 62

Operation with the Remote Control ..............................................................................62

Input Selection ...................................................................................................................62

Changing Channels and Volume ....................................................................................62

Antenna Connection ............................................................................................................. 62

Notification ............................................................................................................................. 63

Information for Users on Disposal of Old Equipment and Batteries ..........................63

Specification ................................................................................................................. 63

Connections ...........................................................................................................................66

Switching On/O ..................................................................................................................67

To Switch the TV On ........................................................................................................67

To Switch the TV O .......................................................................................................67

First Time Installation ............................................................................................................67

About Selecting Broadcast Type .....................................................................................67

Media Playback via USB Input .............................................................................................68

Media Browser Menu ............................................................................................................69

Loop/Shue Mode Operation ...........................................................................................69

System Audio Control ..................................................................................................... 70

English - 54 -

TV Menu Contents .......................................................................................................71

General TV Operation ................................................................................................. 76

Using the Channel List ..........................................................................................................76

Managing the Favourite Lists ..........................................................................................76

Configuring Parental Settings ..............................................................................................76

Electronic Programme Guide (EPG) .................................................................................. 77

Timeline Schedule ............................................................................................................. 77

List Schedule(*) ................................................................................................................. 77

Now/Next Schedule .........................................................................................................77

Event Options ...................................................................................................................77

Teletext Services ..................................................................................................................... 78

Digital Teletext ....................................................................................................................... 78

Software Upgrade .................................................................................................................. 78

Connectivity ................................................................................................................. 79

Wired Connectivity ................................................................................................................79

To Connect to a Wired Network .....................................................................................79

Configuring Wired Device Settings ................................................................................79

Network Type ....................................................................................................................79

Internet Speed Test ...........................................................................................................79

Advanced Settings ............................................................................................................79

Wireless Connectivity ...........................................................................................................80

To Connect to a Wireless Network ................................................................................ 80

Configuring Wireless Device Settings ...........................................................................80

Other Information ............................................................................................................. 81

Connecting to your mobile device via WiFi ..................................................................81

Bluetooth Connectivity ......................................................................................................... 81

Connectivity Troubleshooting .............................................................................................. 82

Wireless Network Not Available......................................................................................82

Connection is Slow ............................................................................................................82

Distruption during playback or slow reactions ...............................................................82

Internet Connection Not Available / Audio Video Sharing Not Working .........................................82

Invalid Domain ..................................................................................................................82

Using Audio Video Sharing Network Service ....................................................................82

1. Nero Media Home Installation .....................................................................................82

2. Connect to a Wired or Wireless Network ..................................................................83

3. Play Shared Files via Media Browser ......................................................................83

English - 55 -

Audio Video Sharing .............................................................................................................83

Nero MediaHome Installation .............................................................................................. 83

Internet Portal .........................................................................................................................84

Internet Browser .....................................................................................................................84

Smart Center ..........................................................................................................................86

Getting Started ................................................................................................................. 86

Mobile Device screen ......................................................................................................87

Detail Page ........................................................................................................................ 88

Media Share Page ............................................................................................................ 88

Portal Launcher ................................................................................................................ 88

Smart Remote Feature .................................................................................................... 88

Voice Recognation ........................................................................................................... 88

Keyboard Page ................................................................................................................. 88

Quick Standby .................................................................................................................. 89

Requirements .................................................................................................................... 89

Cleaning and Maintenance ..........................................................................................89

Troubleshooting .....................................................................................................................90

Information ................................................................................................................... 93

PC Input Typical Display Modes .........................................................................................93

AV and HDMI Signal Compatibility ................................................................................... 93

Supported Video File Formats for USB Mode ..................................................................94

Supported Picture File Formats for USB Mode ................................................................94

Supported Audio File Formats for USB Mode ..................................................................95

Supported DVI Resolutions .................................................................................................. 96

Disposing Of Your Appliance and Battery In An Environment-Friendly Way ............... 97

Recommendations for Energy Saving ................................................................................. 97

Dear Customer; .....................................................................................................................98

IMPORTANT WARNINGS ................................................................................................ 99

1. Rights reserved by the manufacturer: ........................................................................ 99

2. Warnings about Screen Technology: ......................................................................... 99

3. A continuous fixed image on the screen: .................................................................. 99

4. In Full HD products; .................................................................................................... 99

5. About Working Sound of the Appliance: .................................................................. 99

6. Make sure that the panel (screen) of your appliance is never subjected to any

external mechanical impact: .......................................................................................... 100

English - 56 -

7. About the use of the appliance: ................................................................................ 100

Optional Rights of Customer ..............................................................................................101

English - 57 -

J Safety Information

Don’t operate your TV in extreme ambient conditions
as this may cause damage to your TV.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Note: Follow the on screen instructions for operating the related features.

In extreme weather (storms, lightning) and long inactivity periods
(going on holiday) disconnect the TV set from the mains. The
mains plug is used to disconnect TV set from the mains and
therefore it must remain readily operable.

This sign is present wherever there is very important information
on operation and maintenance of the appliance in the literature
accompanying it.

English - 58 -

J Markings on the

Product

The following symbols are used on the
product as a marker for restrictions and

precautions and safety instructions. Each
explanation shall be considered where the
product bears related marking only. Note such
information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not
require a safety connection to electrical
earth.

Class II Equipment With Functional
Earthing: This appliance is designed in such

a way that it does not require a safety
connection to electrical earth, the earth
connection is used for functional

purposes.
Protective Earth Connection: The marked

terminal is intended for connection of
the protective earthing conductor
associated with the supply wiring.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under
normal operating conditions.

Caution, See Operating Instructions: The

marked area(s) contain(s) user
replaceable coin or button cell batteries.

Class 1 Laser Product: This product contains

Class 1 laser source that
is safe under reasonably
foreseeable conditions of
operation.

WARNING

Do not ingest the battery, Chemical Burn
Hazard

(The accessories supplied with or) This
product may contain a coin/button cell
battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns
in just 2 hours and can lead to death.

Keep new and used batteries away from
children.

If the battery compartment does not close
securely, stop using the product and keep it
away from children.

If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.

WARNING

Never place a television set in an unstable
location. A television set may fall, causing
serious personal injury or death. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as;

Using cabinets or stands recommended by
the manufacturer of the television set.

Only using furniture that can safely support
the television set.

Ensuring the television set is not overhanging
the edge of the supporting furniture.

Not placing the television set on all furniture
(for example, cupboards or bookcases)
without acnhoring both the furniture and the
television set to a suitable support.

Educating children about the dangers of
climbing on furniture to reach the television
set or its controls.

If your existing television set is being retained
and relocated, the same considerations as
above should be applied.

i

CLASS 1
LASER PRODUCT

English - 59 -

IMPORTANT  Please read these instructions fully before installing or operating

WARNING: Never let people (including
children) with reduced physical, sensory or
mental capabilities or lack of experience
and / or knowledge use electrical devices
unsupervised.

For ventilation purposes, leave a free space
of at least 10 cm all around the set.

•Do not block ventilation holes.

•Do not place the TV on sloping or unstable

surfaces, the TV may tip over.

•Use this device in moderate climates.

•The power cord plug should be easily

accessible. Do not place the TV, furniture,
etc. on the power cord. A damaged power
cord/plug can cause fire or give you an
electric shock. Handle the power cord by
the plug, do not unplug the TV by pulling
the power cord. Never touch the power
cord/plug with wet hands as this could
cause a short circuit or electric shock. Never
make a knot in the power cord or tie it with
other cords. When damaged it must be re­placed, this should only be done by qualified
personnel.

•Do not use this TV in a humid or damp

environment. Do not expose the TV to
liquids. In case the cabinet contacts any
liquids unplug the TV immediately and have
it checked by qualified personnel before
operating it any further.

•Do not expose the TV to direct sunlight,

open flames or place it near intense
heat sources such as electric heaters.

•Listening in excessive volumes from

earphones and headphones may cause
hearing loss.

•Ensure that no open flame sources, such

as lit candles, are placed on top of the TV.

•To prevent injuries, this TV must be securely
attached to a wall by carefully following the
instructions (if the option is available).

•Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green
or red point. Please note that this does not
aect the performance of your product.
Take care not to scratch the screen with
fingernails or other hard objects.

•Before cleaning, unplug the TV from the
wall socket. Only use a soft, dry cloth while
cleaning.

Warning

Serious injury or death risk

Risk of electric

shock

Dangerous voltage risk

Caution

Injury or property damage
risk

Important

Operating the system
correctly

Notice

Additional notes marked

Safety Information to Be
Observed During Cleaning
and Maintenance

•Always unplug the device before starting
cleaning and maintenance.

•Make sure that device is o and disconnect­ed from all electrical outlets.

•Wipe the cabin with a dry soft cloth.

•Do not use damp cloth, alcohol, ammonia,

corrosive material included cleaning liquid
or inflammables such as thinner.

•Do not allow liquid or foreign entry bodies
to enter into speaker grills or other gaps.

English - 60 -

Safety Information to
Be Observed During
Transport and Shipping

•Your device must be kept in its original
package to protect from damage to its
accessories during transport and shipping.

Keep the product in normal position during
transport.

Do not drop the device during transport and
protect it against impacts.

Damages and faults that occur during
transport after the delivery of the appliance
to the customer are not included in the
warranty cover.

Batteries

•Do not expose batteries to direct sunlight,
fire etc. factors or extreme temperatures.

•Replace the discharged battery with a
battery in shape and type explained in the
section "installing the batteries to remote".

•Do not use rechargeable batteries.

•Do not use remote if there is a leak from

the battery.

•Do not touch the liquid leaking from battery.
Wash with water in case of contact.

WARNING

•Do not ingest the battery, Risk of Chemical
Burn

•(Accompanying accessories or) This prod­uct can include a pull/button type battery.
If button type battery is ingested, it may
cause serious burns within your body and
death only within 2 hours.

•Keep new and used batteries away from
children.

•If battery housing doesn't close properly,
do not use the product and keep away from
children.

•If you think that batteries were ingested or
exists within your body, please get medical
care immediately.

Liability Limitation

Manufacturing company does not assume
any responsibility for damages and injuries
that might be caused due to not observing
the instructions in this user manual,

using the device outside its intended
use, unauthorized repairs, unauthorized
modifications on the device and using spare
parts not approved by the manufacturer.

English - 61 -

Features

•TV supports Ultra HD (Ultra High
Definition - also known as 4K) which
provides resolution of 3840 x 2160 (4K:2K).
It equals 4 times the resolution of Full HD
TV by doubling the pixel count of the Full
HD TV both horizontally and vertically.
Ultra HD contents are supported from
HDMI, USB inputs and over DVB-T2 and
DVB-S2 broadcasts.

•Remote controlled colour TV

•Fully integrated digital terrestrial/cable/

satellite TV (DVB-T-T2/C/S-S2)

•HDMI inputs to connect other devices with
HDMI sockets

•USB input

•OSD menu system

•Scart socket for external devices (such as

DVD Players, PVR, video games, etc.)

•Stereo sound system

•Teletext

•Headphone connection

•Automatic programming system

•Manual tuning

•Automatic power down after up to eight

hours.

•Sleep timer

•Child lock

•Automatic sound mute when no

transmission.

•NTSC playback

•AVL (Automatic Volume Limiting)

•PLL (Frequency Search)

•PC input

•Game Mode (Optional)

•Picture o function

•Pixellence

•Ethernet (LAN) for Internet connectivity

and service

•802.11n built in WIFI Support

•Audio Video Sharing

•HbbTV

•Bluetooth support

Accessories Included

•Remote Control

•Batteries: 2 x AAA

•Instruction Book

•Side AV Connection Cable

•Mini Scart Adapter Cable

•Wall Mount Kit

Standby Notifications

If the TV does not receive any input signal
(e.g. from an aerial or HDMI source) for 5

minutes, it will go into standby. When you
next switch-on, the following message will be
displayed: “TV switched to stand-by mode

automatically because there was no signal
for a long time.” Press OK to continue.

If the TV is on and it isn’t being operated
for a while it will go into standby. When you
next switch-on, the following message will be
displayed. “TV switched to stand-by mode

automatically because no operation was
made for a long time.” Press OK to continue.

English - 62 -

TV Control Buttons
& Operation

+

P/CH

+

TV/AV

1. Standby/On button

2. Source button

3. Programme +/- buttons

4. Volume +/- buttons

Press the Volume +/- buttons simultaneously
to view main menu and use Programme +/­buttons to navigate and Volume +/- buttons
to change value.

NOTE: The position of the control buttons
may dier depending on the model.

Operation with the Remote Control

Press the Menu button on your remote
control to display main menu screen. Use
the directional buttons to select a menu tab
and press OK to enter. Use the directional
buttons again to select or set an item. Press
Return/Back or Menu button to quit a menu
screen.

Input Selection

Once you have connected external systems
to your TV, you can switch to dierent input
sources. Press the Source button on your
remote control consecutively to select the
dierent sources.

Changing Channels and Volume

You can change the channel and adjust
the volume by using the Volume +/- and
Programme +/- buttons on the remote.

Inserting the Batteries into the
Remote

Remove the back cover to reveal the battery
compartment. Insert two size AAA batte­ries. Make sure the (+) and (-) signs match
(observe correct polarity). Do not mix old
and new batteries. Replace only with same
or equivalent type. Place the cover back on.

Connect Power

IMPORTANT: The TV set is designed to
operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach
the ambient room temperature before you
connect the set to the mains. Plug the power
cable to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the
AERIAL INPUT (ANT-TV) socket or satel­lite plug to the SATELLITE INPUT (ANT
SAT) socket located on the rear bottom side
of the TV.

Rear bottom side of the TV

satellite

aerial
or
cable

English - 63 -

Notification

TRADEMARK ACKNOWLEDGMENT

The terms HDMI and High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.

Manufactured under license from Dolby La­boratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.

YouTube and the YouTube logo are trade­marks of Google Inc.

Information for Users on Disposal of Old
Equipment and Batteries

[European Union only]

Equipment bearing these symbols should
not be disposed as general household waste.

You should look for appropriate recycling
facilities and systems for the disposal of these
products.

Notice: The sign Pb below the symbol for
batteries indicates that this battery contains
lead.

Products

Battery

“In conformity with the AEEE

Regulation.”

J Specification

TV Broadcasting

PAL BG/I/DK/LL’
SECAM BG/DK

Receiving
Channels

VHF (BAND I/III)

- UHF (BAND U) ­HYPERBAND

Digital Reception

Fully integrated digital
terrestrial-cable­satellite TV(DVB-T­C-S)
(DVB-T2, DVB-S2
compliant)

Number of Preset
Channels

10.000

Channel Indicator On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage 220-240V AC, 50Hz.
Audio German+Nicam Stereo
Audio Output

Power (WRMS.)
(10% THD)

2 x 10W

Power
Consumption (W)

140W

TV Dimensions
DxLxH (with foot)
(mm)

344 x 1239 x 777

TV Dimensions
DxLxH (without
foot) (mm)

32(min) x 54(max) x
1239 x 716

Display

55”

Operation
temperature and
operation humidity

0ºC up to 40ºC, 85%
humidity max

English - 64 -

Remote Control

MENU

BACK

EXIT

Q.
MENU

OK

LANG.

SUBT.

EPG

TXT

V

P

.,2/@

ABC

3

DEF

4

GHI

5

JKL

6

MNO

7

PQRS

8

TUV

9

WXYZ

0

TV

1. Standby: Switches On / O the TV

2. Numeric buttons: Switches the channel,

enters a number or a letter in the text
box on the screen.

3. TV: Displays channel list / Switches to

TV Source

4. Mute: Completely turns o the volume

of the TV

5. Volume +/-

6. Menu: Displays TV menu

7. Directional buttons: Helps navigate

menus, content etc. and displays the
subpages in TXT mode when pressed
Right or Left

8. OK: Confirms user selections, holds the

page (in TXT mode), views channel list
(DTV mode)

9. Back/Return: Returns to previous

screen, opens index page (in TXT
mode)

10. Media browser: Opens the media

browsing screen

11. Info: Displays information about

on-screen content, shows hidden
information (reveal - in TXT mode)

12. My button 1 (*)

13. Coloured Buttons: Follow the on-

screen instructions for coloured
button functions

14. Language: Switches among sound

modes (analogue TV), displays and
changes audio/subtitle language (digital
TV, where available)

15. Subtitles: Turns subtitles on and o

(where available)

16. Rapid reverse: Moves frames backwards

in media such as movies

17. No function

18. Play: Starts to play selected media

English - 65 -

19. Stop: Stops the media being played

20. Rapid advance: Moves frames forward

in media such as movies

21. Pause: Pauses the media being played

22. Screen: Changes the aspect ratio of the

screen

23. Text: Displays teletext (where available),

press again to superimpose the teletext
over a normal broadcast picture (mix)

24. My button 2 (*)

25. EPG (Electronic programme guide):

Displays the electronic programme
guide

26. Exit: Closes and exits from displayed

menus or returns to previous screen

27. Quick Menu: Displays a list of menus

for quick access

28. Internet

29. Programme +/-

30. Swap: Quickly cycles between previous

and current channels or sources

31. Source: Shows all available broadcast

and content sources

(*) MY BUTTON 1 & MY BUTTON 2:

These buttons may have default functions
depending on the model. However you can
set a special function to these buttons by
pressing on them for five seconds when on
a desired source or channel. A confirmation
message will be displayed on the screen. Now
the selected MY BUTTON is associated with
the selected function.

Note that if you perform First Time
Installation, MY BUTTON 1&2 will return
to their default function.

English - 66 -

Connections

Connector

Type

Cables

Device

Mini Scart

Connection

(bottom)

Mini Scart adapter cable

VGA

Connection

(bottom)

AUDIO IN

PC/YPbPr

Audio

Connection

(back)

YPbPr/PC Audio Cable

HDMI

Connection

(bottom&side)

SPDIF

SPDIF

(Optical Out)

Connection

(back)

SIDE AV

Side AV

(Audio/Video)

Connection

(side)

Audio/Video

Cable

Side Audio/Video

Connection Cable

HEADPHONE

Headphone
Connection

(side)

YPBPR

YPbPr Video

Connection

(back)

YPbPr Connection Cable

USB
Connection
(back&side)

CI

Connection

(side)

CAM

module

LAN

Ethernet

Connection

(back)

LAN / Ethernet Cable

Subwoofer

Connection

(back)(*)

(*) For external subwoofer connection

NOTE: When connecting
a device via the YPbPr or Side
AV input, you must use the
connection cables to enable
connection. See the illustrations

on the left side. | To enable
PC/YPbPr audio, you will need
to use the Back Audio inputs
with a YPbPr/PC audio cable
for audio connection. | If an
external device is connected via
the SCART socket, the TV will
automatically switch to AV mode.|
When receiving DTV channels
(Mpeg4 H.264) or while in Media
Browser mode, output will not
be available via the scart socket.
| When using the wall mounting
kit (available from third party
in the market, if not supplied),
we recommend that you plug
all your cables into the back of
the TV before mounting on the
wall. | Insert or remove the CI
module only when the TV is
SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
| The USB input on the back of the
TV(USB 2.0) supports devices up
to 500mA. Connecting devices
that have current value above
500mA may damage your TV.
For the USB inputs on the side of
the TV(USB 3.0) this limit value
is 1A. | By connecting an HDMI
cable to your TV, you have to use
only a shielded HDMI cable to
guarantee a sucient immunity
against parasitic frequency
radiation. And make sure to use
a High-Speed HDMI cable that
can transmit high definition signals,
such as 4K contents, for trouble­free transmission.

If you want to connect

a device to the TV,
make sure that both the TV
and the device are turned o
before making any connection.
After the connection is done,
you can turn on the units and
use them.

English - 67 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source
such as a wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

•Press the Standby button, Programme +/-

or a numeric button on the remote control.

•Press the Standby button or Programme
+/- on the TV.

The TV will then switch on.

To Switch the TV O

Press the Standby button on the remote
control or press the Standby button on the
TV, then the TV switches into standby mode.

To power down the TV completely, unplug
the power cord from the mains socket.

NOTE: When the TV is switched into

standby mode, the standby LED can blink to
indicate that features such as Standby Search,
Over Air Download or Timer is active. The
LED can also blink when you switch on the
TV from standby mode.

First Time Installation

When turned on for the first time, the langu­age selection screen is displayed. Select the
desired language and press OK.

On the next screen, set your preferences
using the directional buttons.

NOTE: Depending on the Country selection
you may be asked to set and confirm a PIN at
this point. The selected PIN cannot be 0000.
You have to enter it if you are asked to enter a
PIN for any menu operation later.

About Selecting Broadcast Type
Aerial: If Aerial broadcast search option is

turned on, the TV will search for digital ter­restrial broadcasts after other initial settings
are completed.

Cable: If Cable broadcast search option
is turned on, the TV will search for digital
cable broadcasts after other initial settings
are completed. According to your other
preferences a confirmation message may be
displayed before starting to search. Select
YES and press OK to proceed. To cancel
operation, select NO and press OK. You
can select Network or set values such as
Frequency, Network ID and Search Step.
When finished, press OK button.
NOTE: Searching duration will change
depending on the selected Search Step.

Satellite: If Satellite broadcast search option
is turned on, the TV will search for digital
satellite broadcasts after other initial settin­gs are completed. Before satellite search is
performed some settings should be made.
Antenna Type menu will be displayed first.
You can select Antenna Type as Direct,
Single Satellite Cable or DiSEqC switch
by using “ ” or “ ” buttons.

•Direct: If you have a single receiver and a

direct satellite dish, select this antenna type.
Press OK to continue. Select an available
satellite on the next screen and press OK
to scan for services.

•Single Satellite Cable: If you have multiple

receivers and a single satellite cable system,
select this antenna type. Press OK to
continue. Configure settings by following
instructions on the next screen. Press OK
to scan for services.

•DiSEqC switch: If you have multiple
satellite dishes and a DiSEqC switch,
select this antenna type. Press OK to
continue. You can set four DiSEqC options
(if available) on the next screen. Press OK
button to scan the first satellite in the list.

Analogue: If Analogue broadcast search
option is turned on, the TV will search for

English - 68 -

analogue broadcasts after other initial settings
are completed.

Additionally you can set a broadcast type as
your favourite one. Priority will be given to
the selected broadcast type during the search
process and the channels of it will be listed on
the top of the Channel List. When finished,
press OK to continue.

You can activate Store Mode option at this
point. This option will configure your TV’s
settings for store environment and depending
on the TV model being used, the supported
features of it may be displayed on the top of
the screen as an info banner. This option is
intended only for store use. It is recommen­ded to select Home Mode for home use. This
option will be available in System>Options>-
More menu and can be turned o/on later.

Press OK button on the remote control to
continue and the Network Settings menu
will be displayed. Please refer to Connecti-
vity section to configure a wired or a wireless
connection. After the settings are completed
press OK button to continue. To skip to the
next step without doing anything press the
Rapid advance button on the remote.

After the initial settings are completed TV will
start to search for available broadcasts of the
selected broadcast types.

After all the available stations are stored,
scan results will be displayed. Press OK to
continue. The Edit Channel List menu will
be displayed next. You can edit the channel
list according to your preferences or press the
Menu button to quit and watch TV.

While the search continues a message may
appear, asking whether you want to sort
channels according to the LCN(*). Select

Ye s and press OK to confirm.
(*) LCN is the Logical Channel Number

system that organizes available broadcasts

in accordance with a recognizable channel
number sequence (if available).

NOTE: Do not turn off the TV while
initializing first time installation. Note that,
some options may not be available depending
on the country selection.

Using SatcoDX Feature

You can perform SatcoDX operations using
the Installation>Satelite Settings menu. In
the SatcoDX menu, there are two options
regarding to the SatcoDx.

You can download or upload SatcoDX data.
In order to perform these functions a USB
device must be connected to the TV.

You can upload current services and related
satellites & transponders in TV, to a USB
device.

Additionally you can download one of the
SatcoDx files stored in USB device, to the TV.

When you select one of these files, all services
and related satellites and transponders in
the selected file will be stored in the TV. If
there are any installed terrestrial, cable and/
or analog services, they will be kept and only
satellite services will be removed.

Afterwards, check your antenna settings and
make changes if necessary. An error message
stating “No Signal” may be displayed if the
antenna settings are not configured properly.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with
external power supply) external hard disk
drives or USB memory stick to your TV by
using the USB inputs of the TV.

IMPORTANT! Back up the files on your
storage devices before connecting them to
the TV. Manufacturer will not be responsible
for any file damage or data loss. Certain types
of USB devices (e.g. MP3 Players) or USB

English - 69 -

hard disk drives/memory sticks may not be
compatible with this TV. The TV supports
FAT32 and NTFS disk formatting.

While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space
you may experience some problems in the
formatting process.

Wait a little while before each plugging and
unplugging as the player may still be reading
files. Failure to do so may cause physical
damage to the USB player and the USB
device itself. Do not pull out your drive while
playing a file.

You can use USB hubs with your TV’s USB
inputs. External power supplied USB hubs are
recommended in such a case.

It is recommended to use the TV’s USB
input(s) directly, if you are going to connect
a USB hard disk.

NOTE: When viewing image files the Media
Browser menu can only display 1000 image

files stored on the connected USB device.

Media Browser Menu

You can play photo, music and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB
inputs located on the side of the TV. Pressing
the Menu button while in the Media Browser
mode will access the Picture, Sound and
Settings menu options. Pressing the Menu
button again will exit from this screen. You
can set your Media Browser preferences by
using the Settings menu.

Loop/Shuffle Mode
Operation

Start playback with
the Play button and
activate

All files in the list
will be continuously
played in original
order

Start playback with
the OK button and
activate

The same file will be
played continuously
(repeat)

Start playback with
the Play button and
activate

All files in the list will
be played once in
random order

Start playback with
the Play button and
activate ,

All files in the list
will be continuously
played in the same
random order.

Custom Boot Up Logo

You can personalize your TV and see your
favorite image or photo on the screen each
time your TV boots up. To do this, copy
your favorite image files into a USB disk and
open them from the Media Browser menu.
When you have chosen the desired image,
highlight it and press OK to view it in full
screen. Press OK again to choose the image
as custom logo. A confirmation message will
be displayed. Select Ye s and press OK again.
If the image is suitable(*) you will see it on the
screen during the TV’s next boot up.

NOTE: If you perform a First Time Installation
the TV will return to using the default logo,
if any.

(*) Images must have an aspect ratio between
4:3 to 16:9 and they must be in .jpeg, .jpg or
.jpe file formats. The image cannot be set as
boot logo, which’s resolution doesn’t appear
on the info banner.

English - 70 -

FollowMe TV optional

With your mobile device you can stream
the current broadcast from your smart TV
using the FollowMe TV feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.

For further information on using this feature
refer to the instructions of the application
you use.

Note: This application may not be compatible
with all mobile devices. Both of the devices
must be connected to the same network.

CEC and CEC RC Passthrough

This function allows to control the CEC-e­nabled devices, that are connected through
HDMI ports by using the remote control of
the TV.

The CEC option in the System>Options>-
More menu should be set as Enabled at
first. Press the Source button and select the
HDMI input of the connected CEC device
from the Sources List menu. When new CEC
source device is connected, it will be listed in
source menu with its own name instead of the
connected HDMI ports name(such as DVD
Player, Recorder 1 etc.).

The TV remote is automatically able to per­form the main functions after the connected
HDMI source has been selected.

To terminate this operation and control the
TV via the remote again, press Quick Menu
button on the remote, highlight the CEC
RC Passthrough and set as O by pressing
Left or Right button. This feature can also be
enabled or disabled under the System>Op-
tions>More menu.

The TV supports also ARC(Audio Return
Channel) feature. This feature is an audio
link meant to replace other cables between
the TV and the audio system (A/V receiver

or speaker system).
When ARC is active, TV does not mute its

other audio outputs automatically. So you
need to decrease TV volume to zero manu­ally, if you want to hear audio from connected
audio device only (same as other optical or
co-axial digital audio outputs). If you want to
change connected device’s volume level, you
should select that device from the source list.
In that case volume control keys are directed
to connected audio device.

NOTE: ARC is supported only via the
HDMI3 input.

System Audio Control

Allows an Audio Amplifier/Receiver to
be used with the TV. The volume can be
controlled using the remote control of the
TV. To activate this feature set the Speakers
option in the System>Options>More menu
as Amplifier. The TV speakers will be muted
and the sound of the watched source will be
provided from the connected sound system.

Note: The audio device should support Sys­tem Audio Control feature and CEC option
should be set as Enabled.

EManual

You can find instructions for your TV’s fea­tures in the E-Manual.

To use E-Manual, press to the Info button
while main menu is displayed on the screen
or press Quick Menu button, select Infor-
mation Booklet and press OK.

By using the directional buttons select a
desired category. Every category includes
dierent topics. Select a topic and press OK
to read instructions.

To close the E-Manual screen press the Exit
or Menu button.

Note: The contents of the E-Manual may
vary according to the model.

English - 71 -

J TV Menu Contents

System - Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.

Pixellence Demo Mode: While Mode option is highlighted, Pixellence demo
mode will be displayed bottom of the menu screen. Pixellence function optimizes
the TV’s video settings and helps to acquire a better image quality. Press OK to
start Pixellence demo mode to experience Pixellence quality. Press OK button to
cancel (except Game Mode).

Contrast Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving

For setting the Energy Saving to Custom, Minimum, Medium, Maximum,
Auto, Screen O or O.
NOTE: Available options may dier depending on the selected Mode.

Backlight

This setting controls the backlight level. The backlight function will be inactive if
the Energy Saving is set to an option other then Custom.

Advanced Settings

Dynamic Contrast

You can change the dynamic contrast ratio to desired value.

Noise Reduction

If the signal is weak and the picture is noisy, use the Noise Reduction setting to
reduce the amount of noise.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom
options are available.

White Point

If the Colour Temp option is set as Custom, this setting will be available. Increase
the ‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom Sets the desired image size format.

Film Mode

Films are recorded at a dierent number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.

Skin Tone Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this
feature to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

English - 72 -

Autoposition Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in
dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy
picture on the screen. You can use phase to get a clearer picture by trial and error.

Reset Resets the picture settings to factory default settings (except Game mode).
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will

be added to the Picture Settings while in PC mode.

System - Sound Menu Contents

Volume

Adjusts the volume level.

Equalizer

Selects the equalizer mode. Custom settings can be made only when in User
mode.

Balance

Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

Sound Mode

You can select a sound mode (If the viewed channel supports).

Audio Link

Press OK to open the Audio Link menu screen. Using this screen you can
discover and connect the sound devices to your TV wirelessly via Bluetooth.

AVL (Automatic

Volume Limiting)

Sets the sound to obtain fixed output level between programmes.

Headphone/Lineout

When you connect an external amplifier to your TV using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the TV,
set this option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone.
If it is set to Lineout, the output from the headphone socket will be set to maximum
which could damage your hearing.

Digital Out

Sets digital out audio type.

Surround sound Surround sound mode can be changed as On or O.
Bass Gain Controls the bass gain level. Use Left or Right button to set.

English - 73 -

System - Options Menu Contents

Conditional Access

Controls conditional access modules when available.

Language

You may set a dierent language depending on the broadcaster and the country.

Parental

Enter correct password to change parental settings. You can easily adjust Menu
Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set
a new PIN or change the Default CICAM PIN using the related options.

NOTE: Some menu options may not be available depending on the country

selection in the First Time Installation. Default PIN can be set to 0000 or 1234. If
you have defined the PIN(is requested depending on the country selection) during
the First Time Installation use the PIN that you have defined.

Timers

Sets sleep timer to turn o the TV after a certain time. Sets timers for selected
programmes.

Date/Time

Sets date and time.

Sources

Enables or disables selected source options. There are Regular, Enhanced and
Disabled options available for HDMI sources. Regular and Enhanced options are

aecting the colour settings of the selected HDMI source. To be able to watch 4K
images from an HDMI source related source setting should be set as Enhanced if
the connected device is HDMI 2.0 compatible. Set as Regular if the connected
device is HDMI 1.4 compatible. Set acoordingly or disable the related HDMI source
by setting as Disabled.

Network Settings

Displays network settings.

Accessibility

Displays accessibility options of the TV.

Hard of Hearing

Enables any special feature sent from the broadcaster.

Audio
Description

A narration track will be played for the blind or visually impaired audience. Press
OK to see all available Audio Description menu options. This feature is available
only if the broadcaster supports it.

More

Displays other setting options of the TV.

Menu Timeout

Changes timeout duration for menu screens.

HBBTV

You can enable or disable this feature by setting it as On or O.

Software
Upgrade

Ensures that your TV has the latest firmware. Press OK to see the menu options.

Application
Version

Displays current software version.

Subtitle Mode

This option is used to select which subtitle mode will be on the screen (DVB subtitle
/ Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is
available only for the country option of Norway.

English - 74 -

Auto TV OFF

Sets the desired time for the TV to automatically go into standby mode when not
being operated.

Biss Key

Biss is a satellite signal scrambling system that is used for some broadcasts. If you
need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key
and press OK to enter keys on the desired broadcast.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some
items in the TV menu may not be available.

Audio Video
Sharing

Audio Video Sharing feature allows you to share files stored on your smartphone

or tablet pc. If you have a compatible smartphone or tablet pc and the appropriate
software is installed, you can share/play photos on your TV. See instructions of your
sharing software for more information. Audio Video Sharing mode will not be
available with internet portal feature.

Power Up Mode

This setting configures the power up mode preference. Last State and Standby
options are available.

Virtual Remote

Enable or disable the virtual remote feature.

CEC

With this setting you can enable and disable CEC functionality completely. Press
Left or Right button to enable or disable the feature.

CEC Auto
Power On

This function allows the connected HDMI-CEC compatible device to turn on
the TV and switch to its input source automatically. Press Left or Right button to
enable or disable the feature.

Speakers

To hear the TV audio from the connected compatible audio device set as
Amplifier. You can use the remote control of the TV to control the volume of the
audio device.

FollowMe TV
(optional)

Shows the status of the FollowMe TV feature. It will appear as On, if the feature
is in use.

Smart Remote

Press OK to open the Smart Remote menu screen. Using this screen you can
discover and connect the remote controller devices to your TV wirelessly via
Bluetooth.

Quickstandby

If this feature is enabled the TV can be turned on again through the virtual remote
in the Smart Center application if it is turned o through it. Press Left or Right
button to enable or disable the feature.

English - 75 -

Installation Menu Contents

Automatic
channel scan

(Retune)

Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB
stations. Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and
stores analogue stations. Satellite: Searches and stores satellite stations.

Manual

channel scan

This feature can be used for direct broadcast entry.

Network

channel scan

Searches for the linked channels in the broadcast system. Digital Aerial: Searches for
aerial network channels. Digital Cable: Searches for cable network channels.

Analogue

fine tune

You can use this setting for fine tuning analogue channels. This feature is not available if
no analogue channels are stored.

Satellite
Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete
satellites or Edit satellite settings on the list. Antenna installation: You can change satellite
anntenna settings and/or start a satellite scan. SatcoDX: You can upload or download
SatcoDX data using the related options.

Installation

Settings

Displays installation settings menu. Standby Search (Optional): Your TV will search for new
or missing channels while in standby. Any new found broadcasts will be shown.

Clear Service

List

Use this setting to clear channels stored. This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.

Select Active

Network

This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.

First time

installation

Deletes all stored channels and settings, resets TV to factory settings.

English - 76 -

J General TV Operation

Using the Channel List

The TV sorts all stored stations in the
Channel List. You can edit this channel list,
set favourites or set active stations to be listed
by using the Channel List options. Press the
OK/TV button to open the Channel List.
You can filter the listed channels by pressing
the Blue button or open the Edit Channel
List menu by pressing the Green button
in order to make advanced changes in the
current list.

Managing the Favourite Lists

You can create four dierent lists of your
favourite channels. Enter the Channel List
in the main menu or press the Green button
while the Channel List is displayed on the
screen in order to open the Edit Channel List
menu. Select the desired channel on the list.
You can make multiple choices by pressing
the Yellow button. Then press the OK button
to open the Channel Edit Options menu
and select Add/Remove Favourites option.
Press the OK button again. Set the desired
list option to On. The selected channel/s
will be added to the list. In order to remove
a channel or channels from a favourite list
follow the same steps and set the desired list
option to O.

You can use the Filter function in the Edit
Channel List menu to filter the channels in
the Channel list permanently according to
your preferences. Using this Filter option,
you can set one of your four favourite lists
to be displayed everytime the Channel

list is opened. The filtering function in the
Channel list menu will only filter the currently

displayed Channel list in order to find a
channel and tune in to it. This changes will

not remain the next time the Channel list
is opened.

Configuring Parental Settings

The Parental Settings menu options can
be used to prohibit users from viewing of
certain programmes, channels and using of
menus. These settings are located in the
System>Options>Parental menu.

To display parental lock menu options, a PIN
number should be entered. After coding the
correct PIN number, Parental Settings menu
will be displayed.

Menu Lock: This setting enables or disables
access to all menus or installation menus of
the TV.

Maturity Lock: If this option is set, TV gets
the maturity information from the broadcast
and if this maturity level is disabled, disables
access to the broadcast.

NOTE: If the country option in the First
Time Installation is set as France, Italy or

Austria, Maturity Lock’s value will be set to
18 as default.

Child Lock: If this option is set to ON, the
TV can only be controlled by the remote
control. In this case the control buttons on
the TV will not work.

Internet Lock: If this option is set to OFF,
the open browser application in the portal
will be disabled. Set to ON to release the
application again.

Set PIN: Defines a new PIN number.
Default CICAM PIN: This option will appe-

ar as greyed out if no CI module is inserted
into the CI slot of the TV. You can change the
default PIN of the CI CAM using this option.

NOTE: Default PIN can be set to 0000 or

1234. If you have defined the PIN(is requested

depending on the country selection) during

English - 77 -

the First Time Installation use the PIN that
you have defined.

Some options may not be available depending
on the country selection in the First Time
Installation.

Electronic Programme
Guide (EPG)

Some channels send information about their
broadcast schedules. Press the Epg button to
view the Programme Guide menu.

There are 3 different types of schedule
layouts available, Timeline Schedule, List
Schedule and Now/Next Schedule. To
switch between them follow the instructions
on the bottom of the screen.

Timeline Schedule
Zoom (Yellow button): Press the Yellow

button to see events in a wider time interval.

Filter (Blue button): Views filtering options.
Select Genre (Subtitles button): Displays
Select Genre menu. Using this feature, you

can search the programme guide database
in accordance with the genre. Info available
in the programme guide will be searched
and results matching your criteria will be
highlighted.
Options (OK button): Displays event
options.
Event Details (Info button): Displays
detailed information about selected events.

Next/Prev Day (Programme +/- buttons):

Displays the events of previous or next day.

Search (Text button): Displays Guide
Search menu.
Now (Swap button): Displays current event

of the highlighted channel.

List Schedule(*)
(*) In this layout option, only the events of

the highlighted channel will be listed.

Prev. Time Slice (Red button): Displays the
events of previous time slice.

Next/Prev Day (Programme +/- buttons):

Displays the events of previous or next day.
Event Details (Info button): Displays
detailed information about selected events.

Filter (Text button): Views filtering options.
Next Time Slice (Green button): Displays

the events of next time slice.
Options (OK button): Displays event
options.

Now/Next Schedule
Options (OK button): Displays event

options.
Event Details (Info button): Displays
detailed information about selected events.

Filter (Blue button): Views filtering options.
Event Options

Use the directional buttons to highlight an
event and press OK button to display Event
Options menu. The following options are
available.

Select Channel: Using this option, you can
switch to the selected channel.

Set Timer on Event / Delete Timer on
Event: After you have selected an event in
the EPG menu, press the OK button. Select
Set Timer on Event option and press the OK

button. You can set a timer for future events.
To cancel an already set timer, highlight that
event and press the OK button. Then select
Delete Timer on Event option. The timer will
be cancelled.

NOTES: You cannot switch to any other
channel while there is an active timer on the
current channel.

It is not possible to set timer for two or more
individual events at the same time interval.