Vertical SIP Phone, 9112i Quick Reference Manual

1 Lift the handset.

- OR -

Press ( on models 9112i and 9133i)

For external calls:

2 When you hear dial tone, use the dial pad to enter

the external access code (such as 9.)

3 Enter the phone number using the dial pad.

- OR -

For internal calls:

Enter the extension using the dial pad.

Call Return

Calls back the last extension that rang on your prima ry line .
Call Return does not return calls from external ph one
numbers.

Press Call Return, OR 69.

Redial

Redial will place a call to the last phone number you dialed
from the phone. Even if you dialed digits while connected to
a call, the system will only keep track of the last phone
number you dialed.

Press Redial ().

1 Lift the handset.

- OR -

Press ( on models 9112i and 9133i).
2 Press the associated line appearance key while

the line is ringing to connect the call.

Call Pickup

Answer an incoming call on another extension or your pickup
group.

Extension

1 Press Pickup, OR 75.
2 Dial the extension number, if necessary.

Group

Press 74.

Call Waiting

While on an active call, receive incoming calls. You have a
choice to either accept this call (putting the original call on
hold) or ignore the new incoming call.

Accept an Incoming Call

While on a call, if you hear the Call Waiting beep:

Press L2 (or the Pickup softkey on model 480i/

480CT) or FLASH to place the initial call on hold

and connect to the call that is waiting.

Reconnect to the initial call:

Press the primary line key (or the Toggle softkey

on 480i/480CT or the Swap key on 9112i).

MAKING CALLS

ANSWERING CALLS

SIP PHONE

STAR CODE REFERENCE

Call Park

Directed . . . . . . . . . . . . . . Flash + 66 + ext.

Retrieval . . . . . . . . . . . . . . . . . . . . . 65 + ext.

Self . . . . . . . . . . . . . . . . . . . . . . . Flash + 64

Retrieval . . . . . . . . . . . . . . . . . . . . . 65 + ext.

System . . . . . . . . . . . . . . . . . . . . Flash + 62

Retrieval . . . . . . . . . . . . . . . . . . . . . 63 + slot

Call Pickup

Extension.. . . . . . . . . . . . . . . . . . . . 75 + ext.

Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Call Return . . . . . . . . . . . . . . . . . . . . . . . 69

Call Waiting . . . . . . . . . . . . . . . . . . . . .

Flash

Disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Caller ID Blocking . . . . . . . . . . . . . . . . . 67

Cancel . . . . . . . . . . . . . . . . . . . . . . 77 + ext.

Centrex . . . . . . . . . . . . . Flash + 80 + code

Conference . . . . . . . . . . . . . . . . .

Flash + 71

Connect Party. . . . . . . . . . . . . . . . . . . . . . 71

Reconnect to Conference. . . . . . . . . . . . . . 72

Do Not Disturb . . . . . . . . . . . . . . . . . . . . 41

Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Forward. . . . . . . . . . . . . . . . . . . . 43 + dest.

Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . Flash

Intercom . . . . . . . . . . . . . . . . . . . . . . . . . 82

Night Answer

Activate. . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Deactivate. . . . . . . . . . . . . . . . . . . . . . . . . . 86

Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Page Group

. . . . . . . . . . . . . . 12 + group no.

System Speed Dial

. . . . . . . . . . . . 89 + code

Toggle

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Transfer. . . . . . . . . . . . . . . . . . . .

Flash + ext.

PART NUMBER XXX-XXXX-XXXXXX

SIP Phone

QUICK

REFERENCE

GUIDE

Release the Call Waiting Call:

While the call waiting call is active:

Press Goodbye ( also known as End Call on

models 9112i and 9133i) to drop the call waiting call and
reconnect to the original call.

Disabling Call Waiting

You can disable Call Waiting for the duration of a specific call
only.

Press 70, and dial the phone number.

Night Answer

Use the Night Answer feature, to manually redirect all inbound calls to
the Vertical Wave system to a predetermined destination.

• Your system administrator can configure any on- or off-premise
phone number as the destination.

To turn on the Night Answer Service:

Press 85.

To turn off the Night Answer Service:

Press 86.

Hold

Put the current call on hold while you use other phone features.

While on an active call:

1Press Hold ( on models 9112i and 9133i).
2 Press the key corresponding to the line at which the call

was placed on hold to reconnect.

NOTE

You can also use Call Park features to place calls on
hold. Refer to the Wave Phone User’s Guide for details.

Transfer

Place a call on hold while you dial the destination extension, then
transfer the call.

Blind

Transfer a call without announcing the call to the recipient.

With a party on the line:

1Press .
2 Enter the destination extension.

3Press

and/or hang up to complete the transfer.

Supervised

Place a call on hold while you dial the destination extension, then
announce the call to the recipient before transferring.

With a party on the line:

1Press .
2 Enter the destination extension.
3 Press the Dial softkey and wait for an answer.
4 Announce the call.

Press and hang up to complete the transfer.

ANSWERING CALLS (continued)

PLACING CALLS ON HOLD

TRANSFERRING CALLS

Company confidential draft document For review only - do not distribute 7/11/07

WAVE ISM 1.0 Build 6 - 10.0.20070628.0.0 (0703)

Feature keys invoke application features. The following features
are available on your phone by default.

NOTE

Your SIP phone features may vary depending on the
model and on how your Wave phone system is set up.
Contact your phone system administrator for more
information.

Conf

Establishes server based conference of up to four conferees.

Goodbye

(also known as End Call on models 9112i and 9133i)

Releases the current call the same as hanging up the handset.

Icom ( on model 480i/480CT)

Performs a voice call to another extension.

Mute ( on model 480i/480CT)

When your phone is muted, you can hear the caller but th e caller
cannot hear you.

Redial

Places a call to the last number you dialed.

Transfer

Places a call on hold while you dial and connect to the destination
extension.

Volume Adjustment

Use the and - keys below the dial pad to adjust the

volume of the handset, speaker, and ringer.

Setting Options

To make changes to settings such as the display contrast, ring
tone, headset volume, etc. follow the procedure below.

1Press Options
2 Follow the prompts that appear on the display (use the

navigation keys as described).

• Refer to the Wave Phone User’s Guide or contact your
system administrator for information.

The Vertical Wave system supports the following features on the
Vertical Wave SIP phones. Most of these features are either
configured as stationary feature keys or as soft keys that
correspond to items on the display. Contact your phone system
administrator for details on which features are configured on your
phone.

Using authorization codes

You might be assigned an authorization code that gives you the
ability to make calls on restricted phone line keys. Authorization
codes are used to override access restrictions.

Contact your system administrator for specific information
regarding authorization codes for your phone system.

1 Dial a phone number, and listen for a long beep.
2 Enter your authorization code, and press .

STANDARD FEATURE KEYS

PHONE SETTINGS

ADDITIONAL FEATURES

Set up a conference with both internal and external
participants. Contact your system administrator for
information about the maximum allowed participants.

Set Up the Conference

With a party on the line:

1Press Conference ( ) to put the other party

on hold.

2 Dial the number of the next conference member.

When that party answers:

3Press Conference ( ) again to connect the

calls to start a conference.

4 Repeat steps 2 and 3 to connect additional

parties.

5 Complete the conference by pressing Conference

().

Drop Yourself from the Conference:

Remove yourself from the conference while leaving
other members connected.

Press Goodbye ( also known as End Call on

models 9112i and 9133i).

Intercom

Make calls from your phone to another extension within
your phone system.

Model 480i/480CT

1Press Intercom ().
2 Dial the extension.

3Press Intercom ( ), OR press Goodbye

( also known as End Call on models 9112i
and 9133i) to end the call.

Models 9112 and 9133

1 Dial the extension

- OR -

Press the desired line button and dial the

extension.

Page

Page all the SIP phone speakers on your system, or page
the Page key a specific group of SIP phones only.

Page the Entire System

1 Press Intercom ( ), OR 11.
2 Make the announcement.
3 Hang up when you are finished making your

announcement to disconnect from the public
address system.

Page a specific group:

1 Press Intercom ( ), OR 12.
2 Enter the group number.
3 Make your announcement.
4 Hang up when you are finished making your

announcement..

CONFERENCE CALLS

USING INTERCOM AND PAGE

Blocking Caller ID internally

Blocking caller ID keeps your caller ID information private when
making a call to another extension.

Press 67, and dial the phone number.

• Caller ID Blocking is canceled when you end the call.

• You cannot block caller ID to external calls using

67.

Callers List (Models 9133i and 9112i only)

1

The Callers list is a stored log of your incoming calls. Your phone
logs the number and name (if available) of the caller, when they
last called, and the number of times they tried to reach you.

• Refer to the Wave Phone User’s Guide for details.

Directory List (Models 9112i and 9133i only)

1

The Directory List is your personal phone book, conveniently
stored within your phone. You can enter up to 200 entries into the
9133i Directory by adding them manually, or by saving the
number and name from other lists stored on your phone.

• Refer to the Wave Phone User’s Guide for details.

Do Not Disturb

Prevent your phone from ringing.

Press 41 to enable, then press 42 to disable

Do Not Disturb.

Redirect your call from your primary line to another ex tension or
phone number.

NOTE

The Forward feature will behave differently depending
on whether or not your Forward key is programmed with
a target phone number.

Internal Calls

1Press Forward, OR 43, then dial the extension

number to which you want calls forwarded.

2 Enter the extension number to which you want to

forward calls.

External Calls

1Press Forward, OR 43.
2 Enter the external access digit(s) - usually a 9.
3 Enter the phone number to which you want to forward

calls.

• If you enter an international phone number, you must
enter a at the end of the number.

• If you are prompted for a password, enter your Voice
Mail password, and press .

Canceling Call Forwarding

Press Forward, OR 44 to cancel call forwarding.

ADDITIONAL FEATURES (continued)

FORWARDING CALLS

IMPORTANT! Which Phone Are You Using?

This Quick Reference Guide includes general information for SIP
phones. Because SIP phone models vary as to which features and
buttons are available on a particular phone, please refer to the
Wave Phone User’s Guide to review specific details about the
buttons/keys and features that are available on yo ur phone.

Using the Display Screen

When you are not on a call, the display screen provides in for m at ion
about your phone and extension.

When you are on a call, the display screen provides information
about the call, including a call timer that displays the length of time
you have been connected. Additional inform ation is disp layed if your
calls are forwarded to another number, if you have a call on hold, if
you have missed calls, and so forth.

When you are on an inbound call, the display screen shows caller ID
information if it was provided by the other party and if yo ur phone
service provider sends it. If caller ID is not available, the display
screen identifies the inbound trunk group handling the call.

Using the Navigation Keys

When you press certain keys, for example a feature key or soft key,
a list of options is sometimes displayed from which you must select
an item.
Use the display screen control keys to move up and down the list,
then use the appropriate soft key to select the desired item.

Display Icons

The following icons may appear on the display screen when you are
making or receiving calls, or while you are browsing the Callers list.

ICON DESCRIPTION

You have received a new voice message.
You have a call on hold. While browsing the

Callers list, indicates an unanswered call.
You are on an outgoing call. While browsing

the Callers list, indicates an answered call.
You are on an incoming call. While browsing

the Callers list, indicates a Call Waiting call.
You have an incoming Call Waiting call.

You have a new incoming call.
You returned the call from the Callers list.

The caller has called twice. The display screen
shows the date and time of the last call from the
caller.

INTRODUCTION

Scroll

DOWN

SELECT

SELECT

Scroll

UP

N

2x

Company confidential draft document For review only - do not distribute 7/11/07