Verizon VRE3000 User Manual

User guide
Verizon 5G Home Wi-Fi Extender
VRE3000
Contents
1. Product Overview .............................................................................................................................. 2
Verizon VRE3000 ...................................................................................................................................................................................... 3
Components and Indicators .................................................................................................................................................................... 3
LED Indicator States .......................................................................................................................................................................... 4
2. Package Content ................................................................................................................................ 5
3. Getting Started .................................................................................................................................. 7
Setting Up the Wi-Fi Extender ................................................................................................................................................................. 8
Step 1. Position your Wi-Fi Extender and Connected Device ......................................................................................................... 8
Step 2. Plug in your Wi-Fi Extender ................................................................................................................................................. 8
Step 3. Connect your Wi-Fi Extender to your router ...................................................................................................................... 9
Step 4. Find the Best Location for Your Wi-Fi Extender with the Extender Placement Tool ...................................................... 10
Step 5. Manage Your Wi-Fi Extender Settings ............................................................................................................................... 12
4. Wi-Fi Extender Settings ................................................................................................................... 13
Using the Admin Website ...................................................................................................................................................................... 14
Signing In to the Admin Website.................................................................................................................................................... 14
The Dashboard ................................................................................................................................................................................ 14
Navigation ....................................................................................................................................................................................... 15
Frequently Used Wi-Fi Extender Settings ............................................................................................................................................. 16
Extended Network Settings ............................................................................................................................................................ 16
Administration Settings .................................................................................................................................................................. 22
The About Screen............................................................................................................................................................................ 25
The Help Screen .............................................................................................................................................................................. 27
5. Troubleshooting .............................................................................................................................. 28
Frequently Asked Questions .................................................................................................................................................................. 29
6. Product Spec. and Regulatory Information ...................................................................................... 33
Product Specifications............................................................................................................................................................................ 34
Hardware Feature ........................................................................................................................................................................... 34
Internal Antenna Specification ....................................................................................................................................................... 34
Firmware Feature List ..................................................................................................................................................................... 34
Operational and Environmental Requirement .............................................................................................................................. 35
Certification/Regulation Requirement .......................................................................................................................................... 35
Regulatory Information .......................................................................................................................................................................... 36
1
Verizon VRE3000
Components and Indicators
Product Overview
1 Product Overview
2. Power indicator
1. Wi-Fi link indicator
3. WPS indicator
4. WPS button
5. Reset button
7. DC power port
6. Two Ethernet ports and indicators
Verizon VRE3000
Your Verizon VRE3000 is a tri-band Wi-Fi extender which works like a bridge between a Wi-Fi router and Wi-Fi-capable devices (e.g., mobile phones, tablets, laptops, etc.) connected to your Wi-Fi network.
Components and Indicators
Front View
Rear View
1 Product Overview
LED
STATE
DESCRIPTION
Wi-Fi link indicator
Blinking
Not connected to a Wi-Fi router/ Ready for setup/ Other error
Solid Blue
5 GHz connection with the Wi-Fi router is connected.
Power indicator
Blinking
Rebooting/ Starting up/ Software update.
Solid Blue
Power On
Off
Power Off
WPS indicator
Blinking
Slow flash: WPS setup is available for 2 minutes then it times out. Fast flash: WPS setup failed.
Solid Blue
Solid for 20 seconds, then turns off: Successful WPS setup.
Off
WPS setup not in process. The light is off most of the time.
Ethernet indicator
Solid Green
An Ethernet device is connected to the Ethernet port.
1. Wi-Fi link indicator: Indicates 5 GHz connection to network router.
2. Power indicator: Shows if the Extender is on or off.
3. WPS indicator: Shows when Wi-Fi Protected Setup (WPS) is active.
4. WPS button: Use this button to connect your Wi-Fi Extender to your WPS-enabled Wi-Fi router to
extend the network. After setup, you can also use the WPS button to connect WPS­enabled Wi-Fi devices to the extended network.
5. Reset button: Press this button to reset the Wi-Fi Extender to factory default settings: Press and hold for at least 10 seconds until the Power indicator turns off. The Wi-Fi Extender will return to its default settings. It can take around 1 minute to turn back on.
6. Two Ethernet ports: Use these 2 Gigabit Ethernet RJ-45 LAN ports to connect LAN devices.
7. DC power port: Connect the power adapter that came in the package to the DC power connector.
Note:
The design is complete full set design. User should prohibit to remove anything from the product.
LED Indicator States
Note: Devices and software are constantly evolvingthe screen images and icons you see here are for reference only.
Package Content
2
S
2. Package Content
2 Package Content
The package includes two parts within one box:
Verizon VRE3000 Wi-Fi Extender Power Adapter (12V/2A)
Wi-Fi Extender
5GHz Band
Wi-Fi Router
Client device
Client device
Client device
3
Getting Started
Setting Up the Wi-Fi Extender
3. Getting Started
Setup Overview
VRE3000 rang Wi-Fi Extender functions as an access point which repeats existing Wi-Fi signals of your home or office 5GHz band Wi- Fi allows main network access to Wi-Fi clients and two Ethernet wired device. Refer to figure belo
3 Getting Started
Wi-Fi Extender
5 GHz Wi-Fi Router
Wi-Fi Devices
Recommended placement
Wi-Fi Extender
5 GHz Wi-Fi Router
Wi-Fi Devices
Devices too far apart
Setting Up the Wi-Fi Extender
Your VRE3000 Wi-Fi Extender is designed to work with routers that have the 5 GHz Wi-Fi band (Band-1: 5150MHz ~ 5250MHz). Before you begin, make sure that your Wi-Fi router has this band. (Check your router’s user guide, if you’re not sure.)
Step 1. Position your Wi-Fi Extender and Connected Device
Place your Wi-Fi Extender near your home Wi-Fi router. This will ensure that it’s close enough to connect to the router’s Wi-Fi network. (If you plan on connecting with WPS, place the Extender so that you can
reach both devices easily.)
You’ll also want the computer (or tablet) that you’ll be using during setup nearby as well. It will need to connect to your Extender’s Wi-Fi network during setup, or be close enough to be connected with an
Ethernet cable.
Step 2. Plug in your Wi-Fi Extender
Now that your Extender is in position, connect the DC power adapter to the DC power port on the Extender. Then plug it into an electrical outlet. The power indicator on the Extender will blink while it starts up. When it’s solid blue it’s ready to proceed.
3 Getting Started
Note: If you have used this Extender before and want to start fresh, press and hold the reset button for 10 seconds to restore the Extender to its factory default settings. During reset, the Extender will turn off and on again. Wait until the power indicator stops blinking and turns solid blue before moving to step 3.
Step 3. Connect your Wi-Fi Extender to your router
There are 2 ways to connect your Extender to your router:
Use a Wi-Fi-connected computer or tablet (Recommended) Use a computer connected to the Extender with an Ethernet cable
Use a Wi-Fi-connected computer or tablet
Note: Before you begin, you may want to make sure that your computer or tablet is set to connect automatically to your home router’s Wi-Fi network. This will ensure a seamless transition when your Extender begins extending your home Wi-Fi network.
1. Go to your computer or tablet’s list of available Wi-Fi networks and connect to your Extender’s
Wi-Fi network (SSID): Verizon Extender Setup – XXXX.
Note: The XXXX is last four characters of the Extender’s MAC address. You can find your Extender’s full Default Network Name on the sticker on the bottom of your Extender.
2. On your connected device, open a web browser and enter:
http://verizonre (Windows and Android) http://verizonre.local (Mac OS X or iOS) Or try http://192.168.0.250
3. The browser will show the Extender’s Setup Wizard. Follow the onscreen steps to complete setup.
3 Getting Started
Use a computer connected to the Extender with an Ethernet cable
You can also connect your computer to one of the Extender’s two Ethernet ports with an Ethernet cable.
Once you’ve connected your computer, open a web browser and enter:
http://verizonre (Windows and Android) http://verizonre.local (Mac OS X or iOS) Or try http://192.168.0.250.
The browser will show the Extender’s Setup Wizard. Follow the onscreen steps to complete setup.
Step 4. Find the Best Location for Your Wi-Fi Extender with the Extender Placement Tool
Now that your Extender is connected to your router’s Wi-Fi network, you can move it to increase the range of your network. Your Extender’s Admin website has a tool to help you find the best location.
1. If you haven’t already, make sure the device you’ll use to visit the Admin website is connected to your
extended network.
2. If you’ve just completed the Setup Wizard, you can tap Admin Website on the Setup complete! screen
and sign in.
If not, open a web browser and go to one of the addresses below. (You’ll also find these URLs on the label on the bottom of your Extender.) Then sign in.
http://verizonre (Windows and Android) http://verizonre.local (Mac OS X or iOS)
Note: If you have trouble connecting to the Admin website, try this:
1. Disconnect the device from the extended network.
2. Move the device closer to the Wi-Fi Extender.
3. Reconnect to the network.
(See Q2. What can I do if I cannot access the Extender’s Admin website? in the Troubleshooting section for more information.)
For security, it’s recommended that you change your Admin password at this point.
3. After you’ve signed in, you’ll see the Admin website’s Dashboard. The Extender placement card on the
Dashboard will tell you if your Extender is too close, too far, or perfectly placed. Click the > on the card for more information.
10
3 Getting Started
11
Loading...
+ 25 hidden pages