USER
GUIDE
USER GUIDEVL600 USB MODEM
SAMPLE
This booklet is made from 60% post-consumer recycled paper.
This booklet is printed with soy ink.
Printed in Korea
H
VL600
Contents
Contents 1
Welcome 2
VL600 USB Modem Hardware:
Overview 3
The VL600 USB Modem Package 3
Additional features of the VL600 USB
Modem include: 4
Customer Service 4
VL600 USB Modem System
Requirements 5
Your Verizon VL600 USB Modem 6
Service Status Indicator (LED) 7
Ways to Access 8
Mobile Broadband (4G/3G) 8
How to Use Your VL600
USB Modem 9
Preparing the VL600 USB Modem 9
Using the 4G SIM Card 9
Installing the 4G SIM Card 9
REMOVING THE 4G SIM CARD 10
Basics 11
Using the USB modem for the first time 11
VL600 USB Modem
Accessories 17
USB Modem Extension Cable and
Clip Accessory 17
Troubleshooting 19
Wireless communications 21
Important Notice 21
Safety hazards 21
Limitation of liability 24
Copyright 25
Software Drivers License 25
Regulatory Notices 26
Federal Communications Commission
Notice (FCC-United States) 26
RF Exposure/Specific Absorption
Rate (SAR) Information 28
Limited Warranty and Liability 30
Glossary 34
Trademarks and Service Marks 37
Contents
1
Welcome
With Mobile Broadband(4G/3G) service you are now equipped with true data mobility!
The VL600 USB Modem is a data USB modem that operates on Verizon's 4G network,
based on Long Term Evolution (LTE) technology and Mobile Broadband 3G networks in
the United States*.
Now you can connect easily at high speeds to the Internet, your corporate Intranet, and
your email while you're away from the office. Before installing the VL600 USB Modem
®
VZAccess
features of the VL600 USB Modem hardware.
Welcome
*Technology Bands: CDMA 1X, EVDO Rev.A/0 800/1900 MHz, LTE 3GPP Band 13.
*Service not available everywhere. Visit website (verizonwireless.com/4G) for a complete list of
Manager software and drivers, please review this manual which outlines the
LTE band: 700 MHz.
available areas. Information subject to change.
2
VL600 USB Modem Hardware: Overview
The VL600 USB Modem Package
The Verizon VL600 USB Modem package includes:
●
LG VL600 USB Modem
●
VZAccess®Manager CD (including User Guides)
●
USB Modem Extension Cable and Clip Accessory
●
Important Consumer Information Brochure
●
Product Safety & Warranty Guide
●
Quick Reference Guide
VL600 USB Modem Hardware: Overview
3
VL600 USB Modem Hardware: Overview
The VL600 USB Modem is designed for Windows®computers equipped with Type-A USB
ports. This mobile data solution gives you the coverage and speed you need away from the
office. Some of the key features of the VL600 USB Modem are:
VL600 USB Modem Hardware: Overview
●
High Speed Wireless Data via Mobile Broadband(4G/3G)
●
Universal Type-A USB Connector
●
Intuitive VZAccess®Manager Software
Connect easily to the Internet or your corporate Intranet. USB drivers and VZAccess
Manager for Windows
Additional features of the VL600 USB Modem include:
●
VPN Capability
●
Auto Connect
●
NDIS Support
Customer Service
For more information, visit verizonwireless.com/myverizon. You can also call
1-800-922-0204 to speak with a Customer Service Representative. For toll-free
support outside of the U.S. call +1-908-559-4899 for 24/7 global support.
®
XP, Windows Vista®, and Windows 7 on Installation CD.
4
VL600 USB Modem System Requirements
To install and use the VL600 USB Modem, your host computer must meet these
minimum requirements:
VL600 USB Modem Hardware: Overview
Operating System
ware
Soft
Modem Software
CPU
Interface
Disk Drive
Memory (RAM)
Hard Disk Space
Windows®7 (32 & 64 bit), Vista®(32 &
64 bit) and XP (SP2 or higher)
ernet browser software
Int
VZAccess®Manager software included on
the installation CD
300 MHz or higher recommended
One Type-A USB port
CD-ROM
256 M B
100 MB
5
VL600 USB Modem Hardware: Overview
Your Verizon VL600 USB Modem
Your VL600 USB Modem has the following parts:
VL600 USB Modem Hardware: Overview
Note: VZAccess®Manager software installation is required on computer to support USB modem
functionality.
1.
4G SIM Card Slot
SIM Card. (Please refer to page 9 for information on inserting and using your 4G SIM
Card.)
2.
Service Status Indicator (LED)
Please refer to the following page for an explanation of the LED states.
Protective Cap
3.
4.
USB Connector
: This slot, located on the bottom of the USB modem holds the 4G
: This indicator displays service and data modes.
: Protects USB Connector from debris/damage when not in use.
: USB Modem plugs into computer with Type A USB port.
1. 4G SIM CARD Slot
2. Service Status
Indicator (LED)
3. Protective Cap
4. USB Conector
6
Service Status Indicator (LED)
The VL600 USB Modem is designed with a status light that indicates whether
USB modem is powered on and the status of the connection.
VL600 USB Modem Hardware: Overview
LED not lit
LED RED – Solid
LED RED – Blinking
LED BLUE - Blinking
LED GREEN – Blinking
LED ORANGE – Solid
LED ORANGE - Blinking
There is no power to the USB modem.
Your USB modem is powering up.
Your USB modem is searching for service or there is no
service coverage.
Your USB modem is ready to connect to the Internet.
Your USB modem is connected to the internet.
Your USB modem is PIN locked. With PIN Unlocked, LED
Blue or Red is displayed according to the status of the
connection.
Invalid 4G SIM Card in USB modem or no 4G SIM Card is
inserted.
7
VL600 USB Modem Hardware: Overview
Ways to Access
The Verizon VL600 USB Modem supports Verizon Mobile Broadband (4G/3G) service
VL600 USB Modem Hardware: Overview
for a superior wireless data connection.
Mobile Broadband (4G/3G)
Mobile Broadband service provides a wireless broadband connection to the Internet and
requires a Mobile Broadband-capable USB modem*.
Verizon Wireless 4G Mobile Broadband is the fastest, fully mobile wireless Internet data
solution available today. Average download speeds will range from 5 to 12 Mbps and
upload speeds will range from 2 to 5 Mbps, with an expected average round trip latency
of 30 ms within the Verizon Wireless network. This increased network performance will
enable exciting new applications, such as high-resolution multimedia and video
collaboration, to become viable in a wireless mobile environment.
* Speeds require an EV-DO Rev. A-capable USB modem. When using an EV-DO USB modem that is not
Rev. A-capable or traveling in the Extended Broadband Rate and Services area, you can expect
download speeds of 400 - 700 Kbps and upload speeds of 60 - 80 Kbps. Mobile Broadband speed
claims based on our network tests with 5 MB FTP data files, without compression. For EVDO Rev. A
typical download speeds range from 600 kbps to 1.4 Mbps with typical upload speeds ranging from
500 kbps to 800 kbps.
8
How to Use Your VL600 USB Modem
Preparing the VL600 USB Modem
Using the 4G SIM Card
A Subscriber Identity Module (SIM Card) is a “smartcard” that houses personal
information, such as your mobile phone number, calling plan, account information, and
content such as contacts, text messages, and call history.
Installing the 4G SIM Card
If not already done so, please follow these instructions for the installation of your new
4G SIM Card.
1. Press and hold the back cover with thumbs downward and remove the back cover (as
demonstrated below).
2. Insert the 4G SIM Card into the slot. The notched corner on the SIM CARD should
align with the notched corner on the SIM Card tray of the USB modem.
How to Use Your VL600 USB Modem
9
How to Use Your VL600 USB Modem
3. Gently push the 4G SIM Card forward until the card remains securely in the slot.
How to Use Your VL600 USB Modem
4. Replace the back cover on the USB modem.
The SIM Card may remain in the USB modem once installed (no need to remove).
DO NOT
Manager software has been properly installed - see next page.
insert the USB modem into the netbook computer until the VZAccess
Removing the 4G SIM Card
1. With the back cover removed, Look for a small divot at the end of the back panel
closest to the USB Connector.
Divot
2. Insert a fingernail and slide the SIM card out of the SIM Card tray of the USB
10
modem.
®
Note: Should your SIM Card be lost or damaged visit verizonwireless.com/myverizon to order a
replacement SIM card. You can also call 1-800-922-0204 to speak with a Customer Service
Representative. For toll-free support outside of the U.S. call +1-908-559-4899 for 24/7 global support.
The Verizon Wireless 4G SIM Card is compatible with any Verizon Wireless 4G certified USB modem.
You can move the 4G SIM Card from one USB modem to another and your wireless service will work
seamlessly as long as you have a compatible USB modem and service plan. To see which USB modems
are compatible with the Verizon Wireless 4G SIM Card, visit
IMPORTANT: When inserting SIM Card incorrectly, "SIM not inserted" is displayed on VZAccess
Manager. Please unplug the USB modem from your computer. Inserting it at any other time may cause
your USB modem to install incorrectly and fail to work properly on the network.
verizonwireless.com/certifieddevice.
How to properly care for your 4G SIM Card
1. Keep the 4G SIM Card clean and dry at all times.
2. Do not bend, tear, or scratch the 4G SIM Card.
3. Do not expose the 4G SIM Card to extreme temperatures.
4. Do not place the SIM Card near magnetic fields.
5. Do not insert or remove the 4G SIM Card while the USB modem is turned on.
Basics
Using the USB modem for the first time
IMPORTANT! BEFORE INSERTING YOUR 4G USB MODEM INTO YOUR COMPUTER, ENSURE THE
®
VZACCESS
SOFTWARE HAS BEEN INSTALLED CORRECTLY CAN THE COMPUTER OPERATING SYSTEM
SUCCESSFULLY DETECT AND CONFIGURE THE USB MODEM.
MANAGER SOFTWARE ON CD HAS BEEN PROPERLY INSTALLED. ONLY AFTER THE
How to Use Your VL600 USB Modem
11
How to Use Your VL600 USB Modem
VZAccess®Manager Installation
Getting started with your new USB modem is simple. All you need to do is insert the
VZ
How to Use Your VL600 USB Modem
12
Access®Manager CD into your computer’s CD-ROM drive.
Note:
Do not insert/plug-in your USB modem until after VZAccess®Manager finishes installing.
Install VZAccess®Manager
1. Insert the VZAccess®Manager CD into your computer. The VZAccess®Manager
VZ
installation program should automatically start. If the
program does not automatically start:
a. Open the
Computer
on the desktop or on the first level of the Start menu.
b. Find the drive in which the
double-click on its icon. You should now see a list of files and folders on the CD.
c. Double-click on the
2. If you are connected to the Internet, click
available) to check for a newer version of
VZ
Access®Manager is available, follow the instructions provided at the download site
to complete the installation of
Manager is available or you are not connected to the Internet, proceed to step 3.
3. If no newer version of
connected to the Internet, click
to install. After the device driver installation is complete, the
InstallShield Wizard appears.
Computer
). Depending on how you computer is configured, this may either be
folder (on Windows XP systems, this is labeled
VZ
Access®Manager CD has been inserted and
Start.exe
file to begin installation.
Check for Latest VZAccess®Manager
VZ
Access®Manager. If a newer version of
VZ
Access®Manager. If no newer version of VZAccess
VZ
Access®Manager was available in step 2, or you are not
Install VZAccess®Manager
Access®Manager installation
. Wait for the device driver
My
VZ
Access®Manager
(if
®
4. Click
Next
. The
License Agreement
5. If you agree with the Smith Micro License Agreement terms, click
in the license agreement
6. If you agree with the Verizon Wi-Fi License Agreement terms, click the second
.
I accept the terms in the license agreement
Next
. The
7. Click
8. You can choose to create a
selecting the
Next
9. Click
10. It is recommended that you leave the default path as is. If you choose to change
the installation folder, click
11. Click
12. It is recommended that you select
13. Click
14. Click
computer, the
15. Click
16. Insert\plug-in your USB modem and wait for Windows to completely detect it.
Start
VZ
Access®Manager by selecting it in the Start menu or by double-clicking the
desktop shortcut, if you chose to create one.
Customer Information dialog
Install Desktop Shortcut
. The
Destination Folder
Next
. The
Setup Type
Next
. The
Ready to Install the Program
Install
to start the installation process. After the files are copied to your
InstallShield Wizard Completed
Finish
.
dialog appears.
I accept the terms
.
appears.
VZ
Access®Manager shortcut on your desktop by
checkbox.
dialog appears.
Change…
.
dialog appears.
Typical
.
dialog appears.
dialog appears.
How to Use Your VL600 USB Modem
13
How to Use Your VL600 USB Modem
To properly insert the VL600 USB Modem:
1. Flip the protective cap upward from the USB modem.
2. Hold the USB modem along the side edges and gently insert the USB modem into
How to Use Your VL600 USB Modem
your computer’s Type A USB port. The VL600 should fit easily into the USB port. Do
not force the VL600 into the USB port as this may damage both the USB modem and
the USB port.
3. Wait until Windows completes the "Found New Hardware" task. The Hardware Icon
tray appears in the system tray.
Note: If you are experiencing trouble inserting the USB modem into you computer’s USB port:
1. Verify that you are inserting the USB modem the proper way.
2. Verify that you are using a Type-A USB port
14
Establishing connections
1. Once your USB modem is properly inserted, launch VZAccess®Manager from your
computer’s programs/applications list, or from the desktop/dock, if you created a
VZ
shortcut to
VZ
Access®Manager attempts to complete configuration of your USB modem. Wait
2.
until your USB modem is configured and the
VZ
Access®Manager does not detect your USB modem, click
followed by
VZ
3. The
the connection:
when it becomes enabled.
Access®Manager.
Connect WWAN
Start
button.
Access®Manager application window displays the connection options. Select
Verizon Wireless—VZAccess
VZ
Access®Manager may take a moment to establish a
®
. Then just click the
button is active. If
Detect Device
Connect
button
button
connection.
Terminating connections
Once you’re connected, the
your session, simply click this button.
IMPORTANT: Once you have inserted your USB modem, never attempt to remove it until you have
terminated the connection. Doing so could damage your computer.
Connect
button will change to say
VZ
Access®Manager will return to its “ready” state.
Disconnect
. To end
15
Using Phone Menus
Removing your USB modem
After your session is over and you disconnect from the network, you’re ready to safely
remove your USB modem, until your next session. Simply select
Manager
file dropdown menu to completely exit the application. Then, click on the
Unplug/Eject Hardware icon
in the system tray and find the selection from the menu
that matches your computer’s operating system.
●
Windows®XP: LGE LTE Composite
●
Windows Vista®: LGE LTE Composite
●
Windows 7 : LG UDC AHB-Subsystem
Simply grip the VL600 USB Modem on both sides and pull straight out to avoid
damaging the USB connectors.
Exit
from the
VZAccess
®
16
VL600 USB Modem Accessories
USB Modem Extension Cable and Clip Accessory
An extension cable is included to optimize the performance of your VL600 USB modem.
This cable increases the distance between your USB modem and computer, reducing
possible interference from your computer.
How to use the extension cable:
1. Open the USB modem protective cap and insert the USB modem into the wide end
(A) of the cable. Extend the USB modem away from your computer.
VL600 USB Modem Accessories
17
VL600 USB Modem Accessories
2. Slide the USB modem into the included clip, which you can use as a stand, or to hook
it over the top of your computer screen.
VL600 USB Modem Accessories
3. Plug the narrow end (B) of USB connector cable into the USB port on your
computer.
4. Your USB modem is powered by your computer as soon as the USB cable is plugged
properly into the USB port.
Connect
5. Launch VZAccess Manager and click
.
18
Troubleshooting
When properly installed, the VL600 USB Modem is a highly reliable product. Most
problems are caused by one of these issues:
●
The VZAccess®Manager software has not been properly installed.
●
System resources required by the VL600 USB Modem are being used by other USB
modems.
●
Network coverage is not available (either because you are outside the coverage area
or because of an account or network problem).
For issues related to VZAccess®Manager consult the VZAccess®Manager User Guide
located on the Installation CD.
Troubleshooting
19
Troubleshooting
20
Name:
Model:
Approvals:
Weight
Troubleshooting
Dimensions:
Chipset:
Interface Type:
Power Consumption
LG VL600 USB Modem
VL600
FCC Type Acceptance
CTIA TRP/TIS
CDMA Developers Group (stages 1,2,3)
Microsoft WHQL
49.79 g/ 1.76 oz
98.5 mm x 37.6 mm x 14.7mm
3.88 in x 1.48 in x 0.58 in
QUALCOMMTMMSM6800A
LGE L2000
Type-A USB Port
Voltage 5V
Transmit: max 650mA (3.25 watts)
0mA
Idle: max 9
Wireless communications
Important Notice
Due to the transmission and reception properties of wireless communications, data can
occasionally be lost or delayed. This can be due to the variation in radio signal strength
that results from changes in the characteristics of the radio transmission path. Although
data loss is rare, the environment where you operate the modem may adversely affect
communications.
Variations in radio signal strength are referred to as fading. Fading is caused by several
different factors including signal reflection, the ionosphere, and interference from other
radio channels.
Verizon or its partners will not be held responsible for damages of any kind resulting
from the delays or errors in data transmitted or received with the VL600 USB Modem,
or failure of the VL600 USB Modem to transmit or receive such data.
Safety hazards
Do not operate the VL600 USB Modem in an environment that may be susceptible to
radio interference resulting in danger, specifically;
Areas where prohibited by law
●
Follow any special rules and regulations and obey all signs and notices. Always turn off
the host USB modem and remove the modem from the USB port when instructed to
do so, or when you suspect that it may cause interference or danger.
Wireless communications
21
Wireless communications
Where explosive atmospheres may be present
●
Do not operate your modem in any area where a potentially explosive atmosphere
may exist. Sparks in such areas could cause an explosion or fire resulting in bodily
injury or even death. Be aware and comply with all signs and instructions.
●
Users are advised not to operate the modem while at a refueling point or service
station. Users are reminded to observe restrictions on the use of radio equipment in
Wireless communications
fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
●
Areas with a potentially explosive atmosphere are often but not always clearly marked.
Potential locations can include gas stations, below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum gas (such as propane or butane),
areas where the air contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be advised to turn off your
vehicle engine.
Near Medical and life support equipment
●
Do not operate your modem in any area where medical equipment, life support
equipment, or near any equipment that may be susceptible to any form of radio
interference. In such areas, the host communications USB modem must be turned off.
The modem may transmit signals that could interfere with this equipment.
22
On an aircraft, either on the ground or airborne
●
In addition to FAA requirements, many airline regulations state that you must suspend
wireless operations before boarding an airplane. Please ensure that the host USB
modem is turned off and your modem is removed from the USB port prior to
boarding aircraft in order to comply with these regulations. The modem can transmit
signals that could interfere with various onboard systems and controls.
While operating a vehicle
●
The driver or operator of any vehicle should not operate a wireless data USB modem
while in control of a vehicle. Doing so will detract from the driver or operator's
control and operation of that vehicle. In some countries, operating such
communications USB modems while in control of a vehicle is an offense.
Safety Information
●
Only authorized LG or Verizon personnel should service the modem.
●
Do not disassemble or open, crush, bend or deform, puncture or shred.
●
Do not modify or remanufacture or attempt to insert foreign objects into the modem.
●
Avoid dropping the modem or exposing the modem to a liquid, high humidity (such
as a bathroom), fire, explosion or other hazard. If the modem is dropped, especially
on a hard surface, or is exposed to a liquid or comes into contact with a sharp object,
such as animal teeth or nails, immediately take it to an authorized LG service center
for inspection as the internal circuit boards of the modem may be harmed.
Wireless communications
23
Wireless communications
●
If you put your modem in a pocket or bag without covering the USB connector of the
modem (plug pin), metallic articles (such as a coin, paperclip or pen) may shortcircuit the modem. Always cover the USB connector with the protective cap when not
in use.
●
Do not use or leave the modem under direct sunlight or inside a heated car by
sunshine as it might cause the deterioration of modem’s characteristics or life cycle.
●
Wireless communications
Do not handle the modem with wet hands when plugging it in as it may cause an
electric shock or seriously damage your modem.
●
Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to
clean your modem. This could cause a fire.
Limitation of liability
The information contained in this document is subject to change without notice and should
not be construed as a commitment by Verizon, Inc. or LG Electronics MobileComm U.S.A., Inc.
24
Copyright
©2010 Verizon, Inc.
Software Drivers License
Proprietary Rights Provisions:
The software drivers provided with this product are copyrighted by Verizon and/or
Verizon's suppliers.
And although copyrighted, the software drivers are unpublished and embody valuable
trade secrets proprietary to Verizon and/or Verizon's suppliers. The disassembly,
decompilation, and/or Reverse Engineering of the software drivers for any purpose is
strictly prohibited by international law. The copying of the software drivers, except for a
reasonable number of back-up copies, is strictly prohibited by international law. It is
forbidden by international law to provide access to the software drivers to any person
for any purpose other than processing the internal data for the intended use of the
software drivers.
U.S. Government Restricted Rights Clause:
The software drivers are classified as "Commercial Computing USB modem Software" and the
U.S. Government is acquiring only "Restricted Rights" in the software drivers and their
Documentation.
U.S. Government Export Administration Act Compliance Clause:
It is forbidden by US law to export, license or otherwise transfer the software drivers or
Derivative Works to any country where such transfer is prohibited by the United States
Export Administration Act, or any successor legislation, or in violation of the laws of any
other country.
Wireless communications
25
Regulatory Notices
Federal Communications Commission Notice (FCC-United States)
Electronic devices, including computers and wireless modems, generate RF
energy incidental to their intended function and are therefore subject to
FCC rules and regulations.
limits for a Class B digital USB modem, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment. This equipment generates radio
frequency energy and is designed for use in accordance with the manufacturer’s user
Regulatory Notices
manual.
However, there is no guarantee that interference will not occur in any particular
installation. If this equipment causes harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, you are
encouraged to try to correct the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna
●
Increase the separation between the equipment and the receiver
●
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
●
Consult the dealer or an experienced radio/television technician for help
This equipment has been tested to, and found to be within the acceptable
26
This USB modem complies with Part 15 of the Federal Communications Commission
(FCC) Rules. Operation is subject to the following two conditions:
1. This USB modem may not cause harmful interference.
2. This USB modem must accept any interference received, including interference that
may cause undesired operation.
In order to comply with FCC RF Exposure requirements, this USB modem must be
installed so that a minimum separation distance of 0.5cm (0.19”) is maintained between
the antenna and all persons during ordinary operating conditions contingent upon the
following:
1. The laptop or PC is placed on a desktop, table or flat surface
2. The USB modem is placed on a flat surface
WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION
USB MODEM YOURSELF. SUCH ACTION MAY VOID THE WARRANTY. THE VL600
USB Modem IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR TUNING IS
REQUIRED. CONTACT VERIZON TECHNICAL SUPPORT FOR INFORMATION
ABOUT SERVICING YOUR WIRELESS COMMUNICATION USB MODEM.
FCC CAUTION
responsible for compliance could void the user’s authority to operate this equipment.
MODIFICATIONS
modifications made to this USB modem that are not expressly approved by Verizon, Inc.
may void your authority to operate the equipment.
: Any changes or modification not expressly approved by the party
: The FCC requires that you be notified that any changes or
Regulatory Notices
27
Regulatory Notices
This USB modem is approved for use in normal size laptop computers only (typically
with 12” or larger display screens). To comply with FCC RF exposure requirements, this
modem should not be used in configurations that cannot maintain at least 5 mm
(approximately 0.19”) from users and bystanders; for example, in certain laptop and
tablet computers and configurations where the USB connectors on the host computer
are unable to provide or ensure the necessary separation between the modem and its
users or bystanders to satisfy RF exposure compliance requirements. The users should
be advised to see details in the instruction manual.
RF Exposure/Specific Absorption Rate (SAR) Information
Regulatory Notices
This product has been evaluated for SAR and meets the FCC Guidelines for exposure to
radio waves.
FCC Equipment Authorization ID:
Your wireless modem is a radio transmitter and receiver. It is designed and manufactured
not to exceed the exposure limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for USB modems including mobile USB Modems and wireless
modems uses a unit of measurement known as the Specific Absorption Rate, or SAR.
Tests for SAR are conducted using standard operating positions reviewed by the FCC
with the USB modem under test transmitting at its highest certified power level in all
28
BEJVL600
frequency bands. Although the SAR is determined at the highest certified power level,
the actual SAR level of the USB Modem or modem while operating can be well below the
maximum value. This is because the USB Modem is designed to operate at multiple
power levels so as to use only the power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower the power output.
Before this USB modem is made available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are performed in positions and
locations (for example, at the ear or worn on the body) as required by the FCC for each
model.
THE FCC HAS GRANTED AN EQUIPMENT AUTHORIZATION FOR THIS WIRELESS
MODEM WITH ALL REPORTED SAR LEVELS EVALUATED AS IN COMPLIANCE WITH
THE FCC RF EXPOSURE GUIDELINES. THE HIGHEST SAR VALUE FOR THIS MODEM
WHEN TESTED FOR COMPLIANCE AGAINST FCC STANDARDS WAS 1.34 W/KG
USER-LAP POSITION.
Regulatory Notices
29
Limited Warranty and Liability
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed subscriber unit and its enclosed
accessories will be free from defects in material and workmanship, according to the
following terms and conditions:
(1) The limited warranty for the product extends for TWELVE (12) MONTHS beginning
Limited Warranty and Liability
on the date of purchase of the product with valid proof of purchase, or absent valid
proof of purchase, FIFTEEN (15) MONTHS from date of manufacture as determined
by the unit’s manufacture date code.
(2) The limited warranty extends only to the original purchaser of the product and is
not assignable or transferable to any subsequent purchaser/end user.
(3) This warranty is good only to the original purchaser of the product during the
warranty period as long as it is in the U.S, including Alaska, Hawaii, U.S. Territories
and Canada.
(4) The external housing and cosmetic parts shall be free of defects at the time of
shipment and, therefore, shall not be covered under these limited warranty terms.
(5) Upon request from LG, the consumer must provide information to reasonably prove
the date of purchase.
(6) The customer shall bear the cost of shipping the product to the Customer Service
Department of LG. LG shall bear the cost of shipping the product back to the
consumer after the completion of service under this limited warranty.
30
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the product in other than its normal and
customary manner.
Defects or damages from abnormal use, abnormal conditions, improper storage,
(2)
exposure to moisture or dampness, unauthorized modifications, unauthorized
connections, unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of LG, including damage
caused by shipping, blown fuses, spills of food or liquid.
(3) Breakage or damage to antennas unless caused directly by defects in material or
workmanship.
(4) That the Customer Service Department at LG was not notified by consumer of the
alleged defect or malfunction of the product during the applicable limited warranty
period.
(5) Products which have had the serial number removed or made illegible.
(6) This limited warranty is in lieu of all other warranties, express or implied either in
fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved accessories.
(8) All plastic surfaces and all other externally exposed parts that are scratched or
damaged due to normal customer use.
Limited Warranty and Liability
31
Limited Warranty and Liability
(9) Products operated outside published maximum ratings.
(10)Products used or obtained in a rental program.
(11)Consumables (such as fuses).
3. WHAT LG WILL DO:
Limited Warranty and Liability
“LG will, at its sole option, either repair, replace or refund the purchase price of any unit
that does not conform to this limited warranty. LG may choose at its option to use
functionally equivalent re-conditioned, refurbished or new units or parts or any units. In
addition, LG will not re-install or back-up any data, applications or software that you
have added to your phone. It is therefore recommended that you back-up any such data
or information prior to sending the unit to LG to avoid the permanent loss of such
information.”
4. STATE LAW RIGHTS:
No other express warranty is applicable to this product. THE DURATION OF ANY
IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS
OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE
USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
Some states do not allow the exclusive limitation of incidental or consequential damages
or limitations on how long an implied warranty lasts; so these limitations or exclusions
32
may not apply to you. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
5. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call or fax to the following telephone numbers from
anywhere in the continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit http://us.lgservice.com. Correspondence may also be mailed to:
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE ABOVE ADDRESS
for the location of the LG authorized service center nearest you and for the procedures
for obtaining warranty claims.
. Please call or write
Limited Warranty and Liability
33
Glossary
4G SIM
The 4G SIM (Universal Integrated Circuit Card) is the smart card used in mobile data USB
modems and mobile phones. The 4G SIM ensures the integrity and security of all kinds of
personal data. The 4G SIM Card allows users to change mobile USB modems by simply
removing the 4G SIM Card from one mobile USB modem and inserting it into another
mobile USB modem.
LTE (Long Term Evolution)
LTE is the next-generation network beyond 3G. In addition to enabling fixed to mobile
migrations of Internet applications such as Voice over IP (VoIP), video streaming, music
downloading, mobile TV and many others, LTE networks will also provide the capacity to
support an explosion in demand for connectivity from a new generation of consumer
USB modems tailored to those new mobile applications.
eHRPD
Glossary
Evolved High Rate Packet Data. eHRPD is a more evolutionary path to LTE while also allowing for
seamless service mobility - including seamless handover - between the eHRPD and LTE networks.
GMSS
Global Mode System Selection
Broadband
High-capacity, high-speed, transmission channel with a wider bandwidth than conventional
modem lines. Broadband channels can carry video, voice, and data simultaneously.
NDIS (Network Driver Interface Specification)
NDIS is a Windows specification for how communication protocol programs (such as
TCP/IP) and network USB modem driver should communicate with each other.
34
IPv6
IPv6 tethering connection is supported for LTE.
USB
Universal Serial Bus. A connection type for computing USB modem peripherals such as a
printer, mobile VL600 USB Modem, etc.
Type-A USB
The USB ports on computers and hubs have a rectangular Type-A socket, and peripheral
USB modems have a cable with a Type-A plug. Peripherals that do not have an attached
cable have a square Type-B socket on the USB modem and a separate cable with a Type-A
and Type-B plug.
LAN
Local Area Network. A data network confined to limited area with moderate to high data
rates. Does not use common carrier circuits, although may have gateways or bridges to
other public or private networks.
VPN
Virtual Private Network. A way to communicate through a dedicated server securely to a
corporate network over the Internet.
WAN
Wide Area Network (WAN). A computer network covering a broad geographical area.
WANs are used to connect local area networks (LANs) together, so that users and
computers in one location can communicate with users and computers in other locations.
Glossary
35
Glossary
WWAN
Wireless Wide Area Network (WWAN). Also called "wireless broadband" or "broadband
wireless," wireless WANs (WWANs) use cellular towers to transmit a wireless signal over a
range of several miles to a mobile USB modem compared to wireless Wi-Fi LANs (WLANs),
which span only a few hundred feet and generally to only stationary USB modems.
Mbps
Megabits per second - rate of data flow
Kbps
Kilobits per second - rate of data flow
1xEVDO
Glossary
Part of a family of CDMA2000 1x digital wireless standards. 1xEVDO is a "3G" standard.
EVDO stands for "EVolution, Data- Optimized." 1xEVDO is based on a technology
initially known as "HDR" (High Data Rate) or "HRPD" (High Rate Packet Data), developed
by Qualcomm. The international standard is known as IS-856. 1xEVDO has the capability
of providing broadband-like speeds of average speeds of 400-700 kbps.
Rev A
CDMA EV-DO Rev. A is a leading-edge wireless technology with higher data rates and
higher system capacity. It is a fully backward compatible standard and remains
interoperable with deployed EV-DO networks and USB modems around the world. The
increased data rates on Rev. A's physical layer enable richer applications and services. For
more information, visit www.cdg.org.
36
Trademarks and Service Marks
Verizon is a trademark of Verizon Trademark Services LLC, and the other trademarks,
logos, and service marks (collectively the "Trademarks") used in this user manual are the
property of Verizon or their respective owners. Nothing contained in this user manual
should be construed as granting by implication, estoppel, or otherwise, a license or right
of use of Verizon or any other Trademark displayed in this user manual without the
written permission of Verizon or its respective owners.
®
VZAccess
Microsoft
Corporation in the United States and/or other countries.
LTE is a trademark of ETSI.
The names of actual companies and products mentioned in this user manual may be the
trademarks of their respective owners.
Contents of this help file, Copyright 2010 Verizon, all rights reserved.
Manager and Mobile Broadband are service marks of Verizon.
®
and Windows®are either registered trademarks or trademarks of Microsoft
®
Trademarks and Service Marks
37
MEMO
MEMO
Loading...