Veris V200 Spec Sheet

Hot Tap Models

V200 Screw Drive

Threaded Components

Differential Pressure Flow Sensors

Verabar

®

V200 Hot Tap

Pipe Connection Threaded (NPT)
Mounting Type Ball or gate access valve

• Most commonly used hot tap model

• Installation, insertion & retraction without system shutdown

• Economical single threaded rod for most applications

• Two threaded rods for high pressures

Features and

• Synchro drive simultaneously rotates both rods

Benefits

(double rod drives only)

• Patented, anti-seize orbital bearing aligns threaded rods
and eliminates galling

• Can mount to existing valves

• Air (compressed, combustion)

Applications

• Natural gas

• Water (raw, cooling, feedwater)

• Steam

Special Designs—

• Custom mounting, lengths, materials,

Consult Factory

instrument connections, etc.

• Short straight run

Temperature

Pressure

Limits

(ANSI Class Rating)*

150 #

275 psig @ 100°F

(19 Bars @ 38°C)

80 psig @ 800°F

(5.5 Bars @ 426°C)

600#

1440 psig @ 100°F
(99.3 Bars @ 38°C)

825 psig @ 800°F

(56.9 Bars @ 426°C)

Model Specifications V200S V200D

Sensor Code 05 10 15 10 15

Sensor Diameter 7/16” (11mm) 7/8” (22mm) 1-3/8” (35mm) 7/8” (22mm) 1-3/8” (35mm)

Accuracy ±1% of flow rate; ±0.5% if calibrated

ANSI Class* 600# 150# 150# 600# 600#

Drive Rods Single Double

Pipe Size

2”- 6” 6”- 42” 12”-60” 6”-42” 12”- 60”

(50mm-150mm) (150mm-1050mm) (300mm-1500mm) (150mm-1050mm) (300mm-1500mm)

Instrument Connection 1/2” NPT 1/2” NPT or Direct Mount 1/2” NPT or Direct Mount

Components Furnished Weld coupling, close nipple, access nipple and valve

Weld Coupling Size 3/4” NPT 1-1/4” NPT 2” NPT 1-1/4” NPT 2” NPT

The Most Accurate and Reliable Technology
for Measuring Gas, Liquid and Steam…

Developed from aerospace technology,
the Verabar® averaging pitot flow
sensor provides unsurpassed
accuracy and reliability.
With its solid, one-piece
construction and bullet
shape, the Verabar
makes flow
measurement
leak proof
and precise.

The unique
sensor shape
reduces drag and flow induced vibration. The location
of the low-pressure ports eliminates the potential for
clogging and improves signal stability.

Model

V200D

Model
V200S

* DIN and JIS flanges available. Consult factory.

Veraba r

®

Verabar

Flow Calculation

Program

Flow Calculation

Program

5.

Flow Calculation

All Verabar applications require a flow calculation to verify

the DP, pressure and temperature limits, structural limits

and to size the transmitter. The Veracalc PC Program

is for use by representatives and end users. It is easy

to operate and includes steam tables.

Synchro-Drive Description

• Designed for pressures greater than ANSI Class 150#, Synchro-Drive
is equipped with two drive rods that are coupled together by a
protected chain drive system. Turning either drive nut simultaneously
rotates both rods.

Synchro-Drive Benefits

• 95% faster and easier insertion and retraction.

• Equal load distribution over both rods maintains sensor alignment
and eliminates binding.

*U.S. Patent 5,410,920

V200S (Single Rod)
V200D (Double Rod)

Verabar®Hot Tap Models

Synchro-Drive

(Option SYN)

Drive nut

Drive chain

Drive rod

Anti-seize

orbital

bearing

Instrument

head (SS)

Anti-seize

orbital bearing

Packing gland

(SS)

Access nipple

(SS)

Access valve

(CS, SS or

BRZ)

Weld coupling

(CS) (SS-opt)

Close nipple

(SS)

Sensor (316SS)

V200D
only

Screw drive

(threaded

rod-SS)

Protective

chain shroud

4.

Select Model from Page 3

Use the Ordering Information table on Page 3 to determine your
model number.

Short
Straight Run

Consult Factory

(V) Vertical

(H) Horizontal

Pipe Size _____ Sch _____

Pipe ID _____ and

Wall _____ Pipe Mat’l _____

Wall

Height (H) _____

Width (W) _____

Wall _____

Duct Mat’l _____

Dimension

Verabar spans

(H) or (W)

Fluid Name: Maximum Normal Minimum Units

Flow Rate

All

Temperature @ Flow

Fluids

Pressure @ Flow

Gas

Specific Gravity, or
Molecular Weight

Liquid Specific Gravity

Steam Veracalc Program can calculate Density from Temperature and Pressure

ID

W

H

2.

Pipe or Duct Orientation

3.

Enter Flow Conditions

1.

Enter Pipe Dimensions or Duct Dimensions

Furnish the following information:

Model Hot Tap • Threaded Pipe Connections and Components

V200S Single Rod, Insert/Retract, General Purpose

(05 Class 600#, 10 and 15 Class 150#)

V200D Double Rod, Insert/Retract, Higher Pressures (600# max.)

(10 and 15 only)

Pipe Size and Schedule or Exact ID and Wall Thickness

Code Sensor Pipe Size Range

05 2” to 6” (50mm to 150mm)
10 6” to 42” (150mm to 1050mm)
15 12” to 60” (300mm to 1500mm)

Code Pipe Orientation

H Horizontal
V Vertical

Instrument Connections

(Select Remote or Direct Mount)

(Transmitter sold separately)

Remote Mount Transmitter Direct Mount Transmitter

(1/2” NPT) (Flanged 450°F/232°C Max.) †

Parallel Regular RTD

*

Valve Transmount Mass Transmount

*

Manifold

PR D T F G E M

Mounting Assembly — Select Valve Type & Material

(Includes valve, close nipple & weld coupling)

Sensor (Valve Size NPT)

05 (3/4”) 10 (1-1/4” ) 15 (2”) Type, Material & Rating

Code

B3B B5B B8B

Ball, Brz., 600 psig @ 100°F,
100 psig @ 400°F (max.)

B3C B5C B8C

Ball, CS, 1000 psig @ 100°F,
100 psig @ 400°F (max.)

B3S B5S B8S

Ball, SS, 1000 psig @ 100°F,
100 psig @ 400°F (max.)

G3C G5C G8C Gate, CS, ANSI Class 600#
G3S G5S G8S Gate, SS, 1200 psig @ 100°F,

660 psig @ 800°F

Code Options

SYN

Synchronized Two Rod Drive System

(Available for V200D-10 and V200D-15 sensors only)

SS Wetted Components

WPS

(Furnished with SS weld coupling, close & access nipple).
Must be ordered with SS access valve.

V200D 8”sch40 10 H R C2NC B5C SYN Typical Model Number

Ordering Information

Instrument Valves (Opt.) Manifolds (Optional)

Remote Mount Direct Mount

Needle Gate 3-Valve 5-Valve

C2NC (CS) C2GC (CS) F3SC (CS) F3HC (CS) F5SC (CS) F5HC (CS)

C2NS (SS) C2GS (SS) F3SS (SS) F3HS (SS) F5SS (SS) F5HS (SS)

1/2” NPT Soft Seat Hard Seat Soft Seat Hard Seat1/2” NPT

Explsn. Proof

Remote

RTD

Integral

RTD

Integral

Integral

Optional

*

For high pressure (>500psig) or high temperature (>500°F), remote mount RTD in a thermowell is preferred.

† Assuming adequate heat dissipation for transmitter.

6315 Monarch Park Place •Niwot, CO 80503 USA •Phone: [phone] •Fax: [phone]
E-Mail: [e-mail]

•

Website: www.veris-inc.com

True Performance in DP Flow Measurement

PSS-200 (1/07)

Printed in USA

ISO 9001 Certified