Veris AA36 Installation Instructions
VERIS INDUSTRIES
environmental SenSorS
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
Red = Power
Blk = COM
Wht = CO2 Out
6.50"
165mm
4.25"
108mm
3.50"
89mm
inStallation GUiDe
AA36 AA36
Outside Air Enclosure for the
CWE/CWL CO2 Sensors
Installer’s Specifications
Power Requirements if used in temps below +10°C: 24AC/DC; 1A
if used in temps above +10°C: 0.2A
Temperature Range -40° to 70°C (-4 0° to 158°F)
Compatible humid or ha rsh environments, such as greenhouses, livestock pins, or indus trial areas.
quick install
Insert mounting tabs and break off extension piece. Mount to desired locations 1.
using 4 mounting screws.
Mount and wire CWE/CWL sensor (not included).2.
ProDuct iDentification
AA36
Dimensions
Install AA36 cover over CWE/CWL.3.
Z203809-0C PAGE 1 ©2009 Veris Industries USA 800.354.8556 or +1(0)503.598.4564 / support@veris.com 07091
Alta Labs, Enercep t, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘ V’ logo are trademark s or registered tradema rks of Veris Industries, L.L .C. in the USA and/or othe r countries.
Loading...